===================== Product Identification =====================
MSDS NAME:ORANGE GLOSS ENAMEL, 12246
NIIN:00-598-5215
MSDS Number: BHFRF
=== Responsible Party ===
Company:EVERSEAL MFG CO INC
Address:475 BROAD AVE
City:RIDGEFIELD
State:NJ
ZIP:07657-2329
Country:US
Info Phone Num:201-943-4986 / FAX 201-943-1123
Emergency Phone Num:201-943-4986
Preparer's Name:FRANK PRIMERANO
CAGE:72988
=== Contractor Identification ===
Company:EVERSEAL MFG CO INC
Address:475 BROAD AVE
Box:City:RIDGEFIELD
State:NJ
ZIP:07657-2329
Country:US
Phone:201-943-4986
CAGE:72988
============= Composition/Information on Ingredients =============
Name:RESIN
Fraction by Wt: 34%
Name:LEAD CHROMATE (AS PB)
CAS:12656-85-8
Fraction by Wt: 13%
Name:MINERAL SPIRITS
(VAPOR PRESSURE 2)
CAS:64475-85-0
RTECS #:PY8240000
Fraction by Wt: 43%
===================== Hazards Identification =====================
Health Hazards Acute and Chronic:FREQUENT AND PROLONGED EXPOSURE TO
LEAD CHROMATE DUST CAN CAUSE LIVER AND/OR KIDNEY DAMAGE. THOUGH
NOT CONFIRMED BY STUDIES, IT IS ALSO A SUSPECTED CARCINO-GEN UNDER
THESE CONDITIONS.
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA, POSSIBLE
UNCONSCIOUSNESS. SKIN: MAY CAUSE IRRITATION.
EYES: MAY CAUSE
IRRITATIONS.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL
RESPIRATION IF NEEDED. SKIN: WASH WITH SOAP AND WATER.
EYES: FLUSH WITH WATER.
CONSULT PHYSIC IAN.
===================== Fire Fighting Measures =====================
Flash Point:105F/40.56C
Lower Limits:1
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING
MEDIUM. FIREFIGHTERS SHOULD WEAR SELF- CONTAINED BREATHING
APPARATUS.
================== Accidental Release Measures ==================
Spill Release Procedures:ENSURE ADEQUATE VENTILATION. REMOVE IGNITION
SOURCES. ABSORB SMALL SPILLS ON DRY ABSORPTION MATERIAL. USE
SPARK-PROOF SCOOP FOR LARGER SPILLS
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID EXCESSIVE HEAT OR OPEN IGNITION
SOURCES.
Other Precautions:NPCA/HMIS RATING 3,2,O,H.
SANDING, GRINDING, BLASTING OR WELDING
OPERATIONS SHOULD BE PERFORMED ONLY IF ADEQUATE PRECAUTIONS ARE
TAKEN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:FUME AND DUST MASK OR AIR-SUPPLIED HOOD.
Ventilation:ADEQUATE TO ENSURE LEL NOT ACHIEVED.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:PROTECT SKIN WITH CLOTHING OR BARRIER CREAM.
Supplemental Safety and Health
NK
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:323F-390F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:61
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIAL
Stability Condition to Avoid:NA
Hazardous Decomposition Products:CARBON MONOXIDE AND/OR CARBON DIOXIDE
ON COMBUSTION
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF AS PER LOCAL AND FEDERAL REGULATIONS
FOR HAZARDOUS WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|