=====================  Product Identification  =====================

MSDS NAME:ENAMEL,S.G. RUST INHIBITING,OLV DRAB 24084
NIIN:00-577-4381
MSDS Number: BHFQX
=== Responsible Party ===
Company:CHEMRAY COATINGS, CORP.
Address:209 N. MICHIGAN AVE.
Box:NA
City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Info Phone Num:201-245-1111
Emergency Phone Num:800-924-9300
Preparer's Name:FRED ARMSTRONG
CAGE:OBRN9
=== Contractor Identification ===
Company:CHEMRAY COATING CORP
Address:209 N MICHIGAN AVE
Box:City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Phone:201-245-1111
CAGE:33832
Company:CHEMRAY COATINGS CORP.
Address:209 N. MICHIGAN AVE.
Box:NA
City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Phone:800-924-9300
CAGE:OBRN9

=============  Composition/Information on Ingredients  =============

Name:MINERAL SPIRITS
CAS:8052-41-3
RTECS #:WS8925000
Fraction by Wt: 39%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

Name:LEAD CHROMATE (PB CRO4)
CAS:7758-97-6
Fraction by Wt: 13.5%
OSHA PEL:.05 MG/M3
ACGIH TLV:.05 MG/M3

Name:LEAD  (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 7.6%
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:LEAD DRIER (OSHA PEL FROM 29CFR 1910.1025)
Fraction by Wt: 0.13%
OSHA PEL:0.05 MG/M3 (PB)
ACGIH TLV:0.15 MG/M3 (PB);8990

Name:VOC. ORGANIC CMPD 4.09 LB/GL LESS WATER & NPRS* 491 G/L
    LESSWATER
RTECS #:9999999VO

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Effects of Overexposure:NAUSEA, HEADACHE, DIZZINESS CAUSED BY OVER
    INHALATION

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH WATER 15 MINS. CALL PHYSICIAN IF IRRITATION
    PERSISTS.		SKIN: REMOVE CONTAMINATED CLOTHING & WASH
    THOROUGHLY W/SOAP & WATER.		  INHAL: REMOVE TO FRESH AIR,
    CALL A PHYSI CIAN.INGST: DO NOT INDUCE VOMITING, CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:103F/40C
Autoignition Temp:Autoignition Temp Text:473F
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:CARBON DIOXIDE, FOAM, WATER FOG, DRY CHEMICAL
Fire Fighting Procedures:USE AIR SUPPLIED BREATHING APPARATUS FOR
    ENCLOSED CONTAINERS WITH WATER SPRAY.  AVOID BREATHING VAPOR OF
    FUMES.
Unusual Fire/Explosion Hazard:IF LEAK OR SPILL HAS IGNITED, USE WATER
    SPRAY TO DISPERSE VAPORS FROM FIRE	    FIGHTERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. KEEP FROM
    HEAT,   SPARKS, OPEN FLAME. ADD ABSORBENT TO SPILL (SAND,
    EARTH,SAWDUST). LARGE SPILLS KEEP PRODUCT FROM    ENTERING SEWERS &
    WATERCOURSES BY DIKING. ADVISE   AUTHORITIES IF PRODUCT ENTERS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM IGNITION SOURCES. KEEP
    IN COOL DRYWELL VENTILATED AREAS. AVOID DIRECT SUNLIGHT AND 
    EXTREME TEMPERATURES OR COLD.
Other Precautions:AVOID EYE, SKIN CONTACT, INHALATION IGESTION OF
    MISTS, SPRAY OR VAPORS. AVOID   BREATHING SANDING OR BLASTING DUST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE HYDROCARBON VAPOR CANISTER OR SUPPLIED AIR
    RESPIRATORY IN CONFINED AREAS.
Ventilation:LOCAL EXHAUST OR MECHANICAL VENTILATION WITH EXPLOSION
    PROOFEQUIPMENT
Protective Gloves:CHEM RESISTANT
Eye Protection:SPLASH GOGGLES OR FACESHIELD
Other Protective Equipment:CHEM RESISTANT APRON OR CLOTHING
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:308F/155C
Melt/Freeze Pt:M.P/F.P Text:-17.8C
Decomp Temp:Decomp Text:600F/316C
Vapor Pres:<10
Vapor Density:4.8
Spec Gravity:1.26
pH:NA
Viscosity:1.90 CST MAX
Evaporation Rate & Reference:0.09
Solubility in Water:NEGLIGIBLE
Appearance and Odor:ARMY OLIVE DRAB LIQUID, WITH LACQUER ODOR
Percent Volatiles by Volume:63.5
Corrosion Rate:NA

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL WHEN HEATED TO DECOMPOSITION
Stability Condition to Avoid:HIGH TEMPERATURE
Hazardous Decomposition Products:CARBON MONOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF ABSORBED MATERIAL AT AN APPROVED
    DISPOSAL SITE OR FACILITY. DISPOSE IN COMFORMITY WITH   FEDERAL,
    STATE REGULATIONS. EPA HAZARDOUS WASTE   CODE D001.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***