=====================  Product Identification  =====================

MSDS NAME:AEROSOL COATING (PAINT) 13538 YELLOW
NIIN:00-721-9744
MSDS Number: BHFRY
=== Responsible Party ===
Company:NEW YORK BRONZE POWDER COMPANY, INC.
Address:481 DOREMUS AVENUE
City:NEWARK
State:NJ
ZIP:07105
Country:US
CAGE:0AU16
=== Contractor Identification ===
Company:NEW YORK BRONZE INC DIV OF NOVO CORP
Address:777 DOWD AVE
Box:City:ELIZABETH
State:NJ
ZIP:07201
Country:US
CAGE:0AU16

=============  Composition/Information on Ingredients  =============

Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 30%
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192

Name:METHYLENE CHLORIDE	(SARA III)
CAS:75-09-2
RTECS #:PA8050000
Fraction by Wt: 40.5%
OSHA PEL:500 PPM/C,1000; Z2
ACGIH TLV:50 PPM, A2; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:VINYL TOLUENE ALKYD (VEHICLE)
Fraction by Wt: 10%
ACGIH TLV:500 PPM

Name:VINYL NAPHTHA (SOLVENT)
CAS:64742-89-8
Fraction by Wt: <5%
ACGIH TLV:500 PPM

Name:2-BUTOXYETHANOL
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: <5%
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293

Name:BUTANAMIDE 2,2'-53.3' DIMETHYLOXY (PIGMENT)
Fraction by Wt: <5%

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: <5%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Name:BUTANAMIDE 2,2' (PIGMENT)
Fraction by Wt: <5%

Name:COBALT NEODECANATE (ADDITIVE)
Fraction by Wt: <5%
ACGIH TLV:500 PPM

Name:CALCIUM NEODECANATE (ADDITIVE)
Fraction by Wt: <5%
ACGIH TLV:500 PPM

Name:ZIRCONIUM NEODECANATE (ADDITIVE)
Fraction by Wt: <5%
ACGIH TLV:500 PPM

Name:METHYL ETHYL KETOXINE (ADDITIVE)
Fraction by Wt: <5%

Name:CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS:1317-65-3
RTECS #:EV9580000
Fraction by Wt: <5%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9192

Name:SULFATED ETHOXYLATED CASTOR OIL (ADDITIVE)
Fraction by Wt: <5%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Effects of Overexposure:INHALATION:  MAY CAUSE NAUSEA, DIZZINESS,
    ANESTHESIA.  RESPIRATORY NUISANCE.	  SKIN:  MAY CAUSE IRRITATION  
						      EYES:  MAY CAUSE
    IRRITATION

=======================  First Aid Measures  =======================

First Aid:INHALATION:  REMOVE TO FRESH AIR.			       
		      SKIN:  WASH WITH SOAP AND WATER.		       
				  EYES:  FLUSH WITH WATER.INGESTION: 
    GET  MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:-156F/-104C
Lower Limits:1.8
Upper Limits:9.5
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:EXCLUDE AIR
Unusual Fire/Explosion Hazard:VAPORS HEAVIER THAN AIR, MAY TRAVEL BACK
    TO AN IGNITION SOURCE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION, DIKE AND ABSORB
       LIQUID WITH INERT MATERIAL SUCH AS SAND OR VERMI- CULITE.  PLACE
    IN LEAK-PROOF CONTAINERS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID SPARKS, OPEN FLAMES,
    TEMPERATURES OVER 120F.
Other Precautions:DO NOT PUNCTURE CANS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED ORGANIC CANISTER OR AIR PACK
Ventilation:MECHANICAL(GENERAL)-EXPLOSION PROOF 		       
    OTHER-OPEN AIR
Protective Gloves:IMPERVIOUS TYPE
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:APRON FOR SPLASHING
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:B.P. Text:-43.7F/-42C
Vapor Pres:85MM
Vapor Density:1.830
Evaporation Rate & Reference:FASTER
Solubility in Water:SLIGHT
Appearance and Odor:THIN YELLOW LIQUID-TYPICAL PAINT AROMA

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
PURE OXYGEN, ALKALI METALS, OPEN FLAMES AND ELECTRICAL AREAS
Stability Condition to Avoid:TEMPERATURES OVER 120F, STORAGE NEAR
    OXIDIZING MATERIALS
Hazardous Decomposition Products:AT HIGH TEMPERATURES: HYDROGEN
    CHLORIDE VAPOR, CARBON	 MONOXIDE.
Conditions to Avoid Polymerization:TEMPERATURES OVER 120F, STORAGE NEAR
    OXIDIZING MATERIALS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF AS ORDINARY PAINT, IN COMPLIANCE WITH
     FEDERAL, STATE, AND LOCAL LEGISLATION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***