===================== Product Identification =====================
MSDS NAME:DETERGENT LAUNDRY, TYPE III, HIGH SUDSING
NIIN:00-634-0341
MSDS Number: BHFRJ
=== Responsible Party ===
Company:CP INDUSTRIES
Address:503 NORTH 400 WEST
City:SALT LAKE CITY
State:UT
ZIP:84103
Country:US
Info Phone Num:800-453-4931/801-521-0313
Emergency Phone Num:800-453-4931/801-521-0313
CAGE:7X475
=== Contractor Identification ===
Company:CP INDUSTRIES
Address:503 N 400 W
Box:City:SALT LAKE CITY
State:UT
ZIP:84103-1311
Country:US
Phone:801-521-0313
CAGE:7X475
============= Composition/Information on Ingredients =============
Name:SODIUM DODECYL BENZENE SULFATE
CAS:25155-30-0
RTECS #:DB6825000
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:EYE: CAN CAUSE IRRITATION
SKIN: CAN IRRITATE
INHAL: MAY HAVE
IRRITATING DUSTINGST: CA N CAUSE IRRITATION TO MUCOUS MEMBRANES
======================= First Aid Measures =======================
First Aid:EYE: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS.
SKIN: WASH WITH WATER
INHAL: REMOVE PERSON TO FRESH
AIR.INGST: DO NOT INDUCE VOMITING, LARGE AMOUNTS OF WATER
===================== Fire Fighting Measures =====================
Flash Point:NA
Extinguishing Media:REGULAR FOAM, DRY CHEMICAL, CARBON DIOXIDE
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH ON OR
NEAR DRUM OR EMPTY CONTAINER, BECAUSE EVEN RESIDUE MAY IGNITE
EXPLOSIVELY.
================== Accidental Release Measures ==================
Spill Release Procedures:CLEAN UP SPILLS BY SWEEPING OR SHOVELING UP
MATL THEN FLUSH SPILL AREA WITH WATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:CONTAINERS OF THIS MATERIAL MAY BE
HARMFUL WHEN EMPTIED CONTAIENRS RETAIN VAPOR, LIQUID, & SOLID.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:DUST MASKS IF DUST EXCESSIVE
Ventilation:LOCAL EXHAUST
Protective Gloves:SHOULD BE WORN W/EXCESSIVE SKIN CONTACT
Eye Protection:RECOMMENDED IN ALL INDUSTRIAL AREAS
Supplemental Safety and Health
NK
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NA
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:NA
Evaporation Rate & Reference:NA
Solubility in Water:ABOUT 15%
Appearance and Odor:WHITE CRYSTALINE SOLID, LOW ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OPEN FLAMES, TORCHES, CUTTING TORCHES
Hazardous Decomposition Products:CARBON DIOXIDE/MONOXIDE, VARIOUS
HYDROCARBONS
Conditions to Avoid Polymerization:WILL EMIT SULFUR OXIDE WHEN HEATED
OR COME IN CONTACT WITH ACID.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE, AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|