=====================  Product Identification  =====================

MSDS NAME:MIL-L81352A/AMD 1/EXC5, K8-032
NIIN:00-935-7060
MSDS Number: BHFTG
=== Responsible Party ===
Company:CRAWFORD LABS, INC
Address:4165 S EMERALD AVE
City:CHICAGO
State:IL
ZIP:60609
Country:US
Info Phone Num:312-376-7132
Emergency Phone Num:312-433-1307
CAGE:5V430
=== Contractor Identification ===
Company:CRAWFORD LABORATORIES, INC
Address:4165 SOUTH EMERALD AVENUE
Box:City:CHICAGO
State:IL
ZIP:60609
Country:US
Phone:312-376-7132
CAGE:5V430

=============  Composition/Information on Ingredients  =============

Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 20-30%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)
CAS:123-42-2
RTECS #:SA9100000
Fraction by Wt: 5-20%
OSHA PEL:50 PPM
ACGIH TLV:50 PPM; 9192

Name:ACRYLIC RESIN
Fraction by Wt: <1%

Name:BUTYL BENZYL PHTHALATE  (SARA III)
CAS:85-68-7
RTECS #:TH9990000
Fraction by Wt: 1-5%
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 5-20%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:ACETATES						       
    (VAPOR PRESSURE 3.8 MMHG)
CAS:108-65-6
RTECS #:AI8925000
Fraction by Wt: <1%
OSHA PEL:NONE ESTABLISHED
ACGIH TLV:NONE ESTABLISHED

Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: <1%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:ACUTE TOXICITY
Effects of Overexposure:EYE: IRRITATION;  SKIN: DEFATTING,DRYING,
    IRRITATION AND DERMATITIS.		  INHAL: HEADACHE, DIZZINESS,
    NAUSEA, & LOSS OF CONSCIOUSNESS, & MUCOUS MEMBRANES INGST: VOMITING

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH W/PLENTY OF CLEAN LKEWARM WTR FOR 15 MINS. LIFTING
    EYELIDS,MED. ATTN.SKIN: FLUSH W/WTR, REMOVE CONTAMINATED
    CLOTHING/SHOES. WASH W/SOAP & WTR.	     INHAL: REMOVE TO FRESH
    AIR, GIVE ARTIFIC IAL RESP. IF NECESSARY,KEEP VICTIM QUIETGET
    MEDICAL ATTENTION.; INGST: DONOT INDUCE VOMITING, IF IT OCCURS KEEP
    HEAD BELOW HIPS. ADMINISTER LKEWRM WTR IF PERSON IS CONSCIOUS, GET
    MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:43F/6.11C
Lower Limits:0.8
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WATER MAY BE USED TO KEEP EXPOSED CONTNRS
    COOL, & TO KEEP FLAMBLE STRUCT. WET.  DONOT ENTER FIRE AREA W/O
    PROPER PROTEC. BECAUSE HAZ. DECOMP. PROD. MAY BE PRSNT
Unusual Fire/Explosion Hazard:WATER PRESSURE MAY SPREAD A FLAMMABLE
    LIQUID FIRE. SEALED CONTAINERS MAY EXPLODEIF OVERHEATED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. EQUIPMENT MUST
    BE GROUNDED TO PREVENT SPARKING. SOAK UP W/ABSORBENT AND PLACE IN
    NON LEAKING CONTAINERS. SEAL TIGHTLY FOR PROPER DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KNOW APPLICABLE D.O.T. REGULATION
    BEFORE ATTEMPTINTO TRANSPORT THIS MATERIAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:PROVIDE ADEQUATE VENTILATION; IN MORE CONFINED
    AREAS A NIOSH/MSHA APPROVED RESPIRATOR EQUIPPED W/ORGANIC VAPOR
    CARTRIDGE SHOULD BE WORN.
Ventilation:ADEQUATE VENTILATION
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLE & FACE SHIELD
Other Protective Equipment:EYE BATH
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:175-698F
Vapor Density:> AIR
Evaporation Rate & Reference:3.28 X N-BUTYL ACETATE
Appearance and Odor:GRAY LIQUID
Percent Volatiles by Volume:66.7

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS AND STRONG ALKALIES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES, &
    INCOMPATIBILITIES
Hazardous Decomposition Products:INCOMPLETE COMBUSTION FOR PRODUCTS
    LIKE THIS MAY GENERATE   HIGHLY POISONOUS CARBON MONOXIDE & OTHER
    TOXIC GASES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE W/CURRENT LOCAL, 
     STATE, AND FEDERAL REGULATIONS. CONTACT APPROVED  DISPOSAL
    FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***