=====================  Product Identification  =====================

MSDS NAME:GLOSS HARDENER PART B
NIIN:00-959-1853
Kit Part:Y
MSDS Number: BJFQW
=== Responsible Party ===
Company:PETERSON CHEMICAL CORPORATION
Address:710 FOREST AVENUE
Box:102
City:SHEBOYGAN FALLS
State:WI
ZIP:53085
Country:US
Info Phone Num:800-558-7596
Emergency Phone Num:414-467-2471
CAGE:33961
=== Contractor Identification ===
Company:TORGINOL INC
Address:710 FOREST AVE
Box:102
City:SHEBOYGAN FALLS
State:WI
ZIP:53085-0102
Country:US
Phone:920-467-2471
CAGE:33961
Company:VALSPAR CORPORATION
Address:1101 THIRD ST SOUTH
Box:City:MINNEAPOLIS
State:MN
ZIP:55415
Country:US
Phone:612-332-7371/800-228-5635
CAGE:13418

=============  Composition/Information on Ingredients  =============

Name:ETHYL BENZENE  (SARA III)
CAS:100-41-4
RTECS #:DA0700000
Fraction by Wt: 2%
OSHA PEL:100 PPM/125 STEL
ACGIH TLV:100 PPM/125STEL 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 64%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:2-BUTOXYETHANOL
CAS:111-76-2
RTECS #:KJ8575000
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293

Name:TRIETHYLENE TETRAMINE
CAS:112-24-3
RTECS #:YE6650000

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATING AND MAY INJURE EYE
    TISSUE IF NOT REMOVED PROMPTLY. SKIN: MAY IRRITATE AND CAUSE
    DERMATITIS. INHAL: MAY CAUSE DIFFICULTY BREATHING, DIZZINESS, AND
    HEADACHES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:AS A PRECAUTION, EXPOSURE TO LIQUIDS, VAPORS,
    MISTS OR FUMES SHOULD BE MINIMIZED.
Medical Cond Aggravated by Exposure:RESPIRATORY DISORDERS AND SKIN
    ALLERGIES. POTENTIAL FOR NERVOUS SYSTEM, KIDNEY OR LIVER DAMAGE.

=======================  First Aid Measures  =======================

Eyes: FLUSH W/ LARGE AMOUNTS OF WATER FOR AT LEAST 15 MIN.
    GET MD. SKIN: WASH W/ SOAP AND WATER, REMOVE CONTAM CLOTHING . GET
    MD. INHAL: IF BREATHING STOPPED OR IRREGULAR, START RESUSCITATION,
    ADMIN O XYGEN. CALL MD PROMPTLY.

=====================  Fire Fighting Measures  =====================

Flash Point:80.0F,26.7C
Lower Limits:1.0
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON	DIOXIDE (CO*2)
Fire Fighting Procedures:SCBA SHOULD BE AVAILABLE FOR FIRE FIGHTERS.
    COOL FIRE-EXPOSED CNTNERS W/ WATER. FLASHBACK ALONG VAPOR TRAIL MAY
    OCCUR. VAPOR EXPLODE IF IGNI IN AN ENCLOSED AREA
Unusual Fire/Explosion Hazard:KEEP PRODUCT AWAY FROM IGNITION SOURCES,
    HEAT, SPARKS, PILOT LIGHTS, STATIC ELECTRICITY, AND OPEN FLAMES.
    TOXIC FUMES WHEN MATERIAL INVOLVED IN FIRE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMI IGNI SOURCES. KEEP PEOPLE AWAY. STOP
    LEAK. DIKE/CNTN SPILL, KEEP OUT OF WATERWAYS/SEWERS. RECOVER FREE
    PRODUCT. ABSORB W/ SUITABLE MATERIAL. MIN BREATHING VAPORS/ SKIN
    CONTACT. VENT CONFINED SPA CES. ASSURE CONFORMITY TO GOVT. REGS. DO
    NOT SMOKE
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED WHEN
    NOT IN USE. DO NOT TRANSFER MATERIAL TO UNMARKED CONTAINER.
Other Precautions:CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN
    EMPTIED. SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES (VAPOR,
    LIQUID, AND/OR SOLID) ALL HAZARD PRECAUTIONS GIVEN IN THE DATA
    SHEET MUST BE OBSERVE D.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHERE CONCENTRATION EXCEED GUIDELINES USE
    NIOSH/MSHA APPROVED RESPIRATOR W/ ORGANIC VAPOR CARTRIDGE AND DUST
    FILTER. USE SCBA IN CONFINED AREAS.
Ventilation:USE ONLY WHEN EXPOSURE LIMITS AND EXPLOSION CONCENTRATIONS
    EXCEED GUIDELINES. USE EXPLOSION PROOF EQUIP&GROUND CONTNERS.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES W/ SIDE SHIELDS.
Other Protective Equipment:WEAR FULL PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:278F,137C
Vapor Pres:25 MM HG
Vapor Density:> AIR
Spec Gravity:.89
Evaporation Rate & Reference:< ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:62.9

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/ STRONG OXIDANTS.
Stability Condition to Avoid:REACTION W/ SOME EPOXY RESINS/CURING
    AGENTS MAY PRODUCE CONSIDERABLE HEAT
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.
    TOXIC FUMES WHEN MATERIAL IS INVOLVED IN FIRE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ALL CONTAINERS SHOULD BE DISPOSED OF IN AN
    ENVIRONMENTALLY SAFE MANNER AND I/A/W GOVT REGS. DRUMS SHOULD BE
    EITHER RECONDITIONED BY CERTIFIED FIRMS OR PROPERLY DISPOSED OF BY
    APPROVED FIRM.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***