=====================  Product Identification  =====================

MSDS NAME:LACQUER ACRYLIC BLACK 17038, ID 794702
NIIN:00-935-7078
MSDS Number: BJFQQ
=== Responsible Party ===
Company:PRATT AND LAMBERT INC., INDUSTRIAL COATING DIV.
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Info Phone Num:316-733-1361
Emergency Phone Num:316-733-1361
Preparer's Name:W.A. ELLISON, OPRTNS MGR
CAGE:61196
=== Contractor Identification ===
Company:PRATT AND LAMBERT INC
Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Name:CYCLOHEXANONE  (SARA III)
CAS:108-94-1
RTECS #:GW1050000
Fraction by Wt: 25%
Other REC Limits:LFL 1.1
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 30%
Other REC Limits:LFL 2.0 UFL 10.0
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:BUTYL BENZYL PHTHALATE  (SARA III)
CAS:85-68-7
RTECS #:TH9990000
Fraction by Wt: <5%
Other REC Limits:LFL .3
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 5%
Other REC Limits:LFL 3.0 UFL 13.0
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 10%
Other REC Limits:LFL 1.7 UFL 7.1
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: <5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192

Name:VOC 5.29 LB/GAL LESS WATER & NEGLIGIBLY PHOTOCHEMICALLY
    REACTIVE MATERIALS 635 G/L LESS WATER CALCULATED
RTECS #:9999999VO
Other REC Limits:NONE SPECIFIED

Name:VOC 20.29 LB/GAL SOLIDS 2435 G/L SOLIDS CALCULATED
RTECS #:9999999VO
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:OVEREXPOSURE TO TOLUENE MAY CAUSE
    LIVER DAMAGE. REPORTS ASSOCIATE PROLONGED/REPEATED OVEREXPOSURE
    WITH PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY
    DELIBERATELY CONCENTRATING & INHAL ING THE CONTENTS MAY BE HARMFUL
    OR FATAL. TOLUENE HAS BEEN FOUND TO CAUSE KIDNEY, LUNG & SPLEEN
    DAMAGE IN LAB ANIMALS.
Effects of Overexposure:SWALLOW:GASTROINTESTINAL IRRIT, NAUSEA, VOMIT.
    ASPIRATION INTO LUNGS MAY CAUSE CHEM PNEUMONITIS WHICH CAN BE
    FATAL. INHALED: NOSE OR THROAT IRRIT. HIGH CONCENTRATE-ACUTE
    CENTRAL NERV SYST DEPRESS;HEAD ACHES, DIZZ, NAUSEA & CONFUSION.
    EYES: IRRIT. SKIN: LIQ MAY BE ABSORBED IN HARMFUL AMT, MAY CAUSE
    DEFATT & IRRIT OF SKIN

=======================  First Aid Measures  =======================

First Aid:SWALLOW:DONOT INDUCE VOMIT, CALL POISON CONTROL/HOSPITAL/DR.
    INHALE:REMOVE TO FRESH AIR IMMED. IF BREATH STOPPED, GIVE CPR. KEEP
    WARM/QUIET. GET MED ATTN IMMED. EYES:FLUSH W/LG AMTS OF WATER,
    LIFTING  LIDS AT LEAST 15 MINS. GET MED ATTN. SKIN:REMOVE CONTAM
    CLOTHES, WASH AREA W/SOAP & WATER. OBTAIN MED ATTN IF IRRIT
    PERSISTS. NOTE TO DR.: TREATMENT DIRECT AT CONTROL OF
    SYMPTOMS/CLINICAL CONDITIONS

=====================  Fire Fighting Measures  =====================

Flash Point:24 F/-4 C
Extinguishing Media:USE NFPA CLASS B FIRE EXTINGUISHERS DESIGNED FOR
    FLAMMABLE LIQUID FIRES. POLYMER FOAM IS PREFERRED FOR LARGE FIRES.
Fire Fighting Procedures:USE WATER TO COOL EXPOSED CONTAINERS TO
    PREVENT PRESSURE BUILD-UP/AUTO-IGNITE/EXPLOSION FROM EXTREME HEAT.
    IF WATER USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:OVEREXPOSURE TO DECOMPOSITION PRODUCTS
    MAY CAUSE A HEALTH HAZARD. SYMPTOMS MAY NOT BE IMMEDIATELY
    APPARENT. OBTAIN MEDICAL ATTENTION. WARNING! FLAMMABLE!

==================  Accidental Release Measures  ==================

Spill Release Procedures:KEEP SPECTATORS AWAY. ELIM IGNITE SOURCES.
    DIKE & CONTAIN W/MATERIAL(E.G. SAND,ETC)TRANSFER LIQ TO COVERED
    METAL CONTAINER FOR RECOVERY/DISPOSAL. REMOVE W/INERT ABSORB. USE
    ONLY NON-SPARK TOOLS. PREVE NT CONTAM OF SEWERS,GROUNDWATERS
    W/MATERIAL/ABSORB

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 95F. STORE LARGE
    QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106. CLOSE CONTAINER
    AFTER EACH USE.
Other Precautions:DON'T TAKE INTERNALLY. EMPTY CONTAINER MUST NOT BE
    WASHED &/OR RE-USED. CONTAINERS SHOULD BE GROUNDED & BONDED TO
    RECEIVING CONTAINER. DO NOT WELD, BRAZE OR CUT ON EMPTY CONTAINER.
    NEVER USE PRESSURE	TO EMPTY. DRUM IS NOT A PRESSURE VESSEL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WELL VENTED AREA ORGANIC CHEM MAY NOT REQUIRE
    USE OF RSPRTR. RESTRICTED VENT:CHEM CARTRIDGE RSPRTR MAYBE
    REQUIRED. SPRAY:USE MECH PREFILTER. CONFINED AREA:USE AIR SUPPLIED
    RSPRTR. IF TLV EXCEED USE PR OPERLY FITTED RSPRTR W/PROTECTION
    FACTOR
Ventilation:GEN DILUTION/LOCAL EXHAUST VENT IN SUFFICIENT VOL/PATTERN
    TO KEEP CONCENTRATE OF HAZARD INGREDIENTS BELOW LOWEST LIMITS.
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:WEAR SAFETY SPECTACLES.
Other Protective Equipment:NOT LIKELY TO BE NEEDED.
Supplemental Safety and Health
THIS PRODUCT, IF DISCARDED DIRECTLY, WOULD BE CLASSIFIED A HAZARDOUS
    WASTE BASED ON ITS IGNITABILITY CHARACTERISTIC, I.E. HAS A FLASH
    POINT OF 140 DEG. F., OR LESS. THE PROPER RCRA CLASSIFICATION WOUL
    D BE D001.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:175 TO 312F
Vapor Density:> THAN AIR
Spec Gravity:.9
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:73

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
    IGNITION.
Hazardous Decomposition Products:BURNING, INCLUDING WHEN HEATED BY
    WELDING OR CUTTING, WILL PRODUCE SMOKE, CARBON MONOXIDE AND CARBON
    DIOXIDE.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT, SPARKS AND
    FLAMES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE &
    LOCAL LAWS. INCINERATE ONLY EPA PERMITTED FACILITY. DO NOT
    INCINERATE CLOSED CONTAINERS. OBSERVE PRECAUTIONS FOR DISPOSAL OF
    FLAMMABLE MATERIALS. CONTAMINAT ED ABSORB MAY BE DISPOSED IN HAZARD
    WASTE LANDFILL

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***