=====================  Product Identification  =====================

MSDS NAME:1-STROKE VESPHENE (6397-08)
NIIN:01-140-0860
MSDS Number: BJFSD
=== Responsible Party ===
Company:CALGON VESTAL LABORATORIES
Address:7501 PAGE AVENUE
Box:147
City:ST LOUIS
State:MO
ZIP:63166-1096
Country:US
Info Phone Num:314-862-2000
Preparer's Name:R C JENTE
CAGE:21667
=== Contractor Identification ===
Company:CONVATEC, BRISTOL-MEYERS SQUIBB CO
Address:7501 PAGE
Box:147
City:ST. LOUIS
State:MO
ZIP:63166-1096
Country:US
Phone:314-535-1810 (DAY)
CAGE:21667
Company:PARK SURGICAL COMPANY, INC.
CAGE:2G583

=============  Composition/Information on Ingredients  =============

Name:2-PHENYLPHENOL  (SARA III)
CAS:90-43-7
RTECS #:DV5775000
Fraction by Wt: 11.1%

Name:SODIUM O-BENZYL-P-CHLOROPHENATE
CAS:120-32-1
Fraction by Wt: 8.9%

Name:SODIUM P-TERTIARY AMYLPHENATE
CAS:80-46-6
Fraction by Wt: 2.3%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50(ORAL)3.73 GM/KG(RAT)
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:CORROSIVE TO TISSUES.
    EYES&SKIN:SLIGHTLY IRRITATING TO EYES. INHAL:INHALATION TOXICITY
    >29ML/FT@1:256 FOR 6 HOURS. MIST OF USE-DILUTION MAY IRRITATE NASAL
    PASSAGES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARD
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes:IN CASE OF CONTACT,IMMED FLUSH EYES W/PLENTY OF WATER
    FOR AT LEAST 15 MINUTES.CALL A PHYS.SKIN:IN CASE OF CONTACT,IMMED
    FLUSH SKIN W/PLENTY OF WATER FOR AT LEAST 15 MINUTES.REMOVE AND
    WASH CONTAM D CLOTHING BEFORE REUSE.INHAL:REMOVE TOFRESH AIR AND
    CONTACT A PHYS IF IRRIT PERSISTS.INGEST:IF SWALLOWED,DO NOT INDUCE
    VOMITING.DRINK LARGE QUANTITIES OF FLUID AND CALL A PHYSICIAN
    IMMED.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:>200F,>93C
Extinguishing Media:SUITABLE FOR SURROUNDING FIRE - WATER, CO2, FOAM,
    DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .

==================  Accidental Release Measures  ==================

Spill Release Procedures:SPILLS MAY BE CLEANED UP WITH FLOWING WATER.
    THIS IS A CLEANING AND DISINFECTING PRODUCT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:THIS PROD WILL WITHSTAND AN OCCASIONAL
    ACCIDENTAL FREEZING W/O LOSS IN ITS NORMAL PERFORMANCE
    CHARACTERISTICS.THOROUGHLY THAW&AGITATE BEFORE USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:RUBBER
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:MISTS OF USE SOLUTIONS MAY BE IRRITATING TO
    NASAL PASSAGES AND LUNGS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
READ AND OBSERVE LABELED USE INSTRUCTIONS.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:200F,93C
Melt/Freeze Pt:M.P/F.P Text:15.0F,-9.4C
Spec Gravity:1.0769
pH:12.6
Solubility in Water:COMPLETE
Appearance and Odor:BROWN LIQUID, MILD AND PLEASANT
Percent Volatiles by Volume:64%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FORCED IGNITION OF DRIED RESIDUES MAY
    PRODUCE CO, CO2, SULFUR OXIDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE SOLUTIONS MAY BE SEWERED.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***