=====================  Product Identification  =====================

MSDS NAME:LACQUER, ACRYLIC, BLACK 17038, ID 794702
NIIN:00-935-7077
MSDS Number: BJFQP
=== Responsible Party ===
Company:PRATT & LAMBERT INC
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Info Phone Num:316-733-1361
Emergency Phone Num:316-733-1361
CAGE:PRATT
=== Contractor Identification ===
Company:PRATT & LAMBERT
Address:250 PETTIT AVE
Box:2153
City:BELLMORE
State:NY
ZIP:11710
Country:US
Phone:800-647-2253
CAGE:PRATT
Company:PRATT AND LAMBERT INC
Address:Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Name:CYCLOHEXANONE  (SARA III)
CAS:108-94-1
RTECS #:GW1050000
Fraction by Wt: 25%
Other REC Limits:LFL 1.1
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 30%
Other REC Limits:LFL 2.0/UFL 10.0
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:BUTYL BENZYL PHTHALATE  (SARA III)
CAS:85-68-7
RTECS #:TH9990000
Fraction by Wt: < 5%
Other REC Limits:LFL .3
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 5%
Other REC Limits:LFL 3.0/UFL 13.0
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 10%
Other REC Limits:LFL 1.7/UFL 7.1
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: < 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192

Name:VOC 5.29 LB/GAL LESS WATER & NEGLIGIBLY PHOTOCHEMICALLY
    REACTIVE MATERIALS 635 G/L LESS WATER
RTECS #:9999999VO
Other REC Limits:NONE SPECIFIED

Name:VOC 20.29 LB/GAL SOLIDS 2435 G/L SOLIDS
RTECS #:9999999VO
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SWALLOWING MAY CAUSE GASTROINTESTINAL
    IRRIT & CHEMICAL PNEUMONITIS. INHALATION MAY CAUSE NOSE/THROAT
    IRRITATION & ACUTE CENTRAL NERVOUS SYS DEPRESSION. EYE & SKIN
    IRRITANT; HARMFUL AMTS CAN BE ABSORBE D THROUGH SKIN & CAUSE SKIN
    DEFATTING. OTHER EFFECTS: LIVER DAMAGE, PERMANENT BRAIN & NERVOUS
    SYSTEM DAMAGE & DEATH.
Effects of Overexposure:HEADACHES, DIZZINESS, NAUSEA, VOMITING,
    CONFUSION & SEVERE IRRITATION REACTION IF PRODUCT IS SWALLOWED,
    INHALED, ABSORBED THROUGH SKIN, OR GETS INTO EYES.
Medical Cond Aggravated by Exposure:REPORTS HAVE ASSOCIATED PROLONGED
    AND REPEATED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
    BRAIN AND NERVOUS SYSTEM DAMAGE.

=======================  First Aid Measures  =======================

First Aid:SWALLOWING: DO NOT INDUCE VOMITING. CALL POISON CONTROL
    CENTER IMMEDIATELY.  INHALATION: REMOVE TO FRESH AIR IMMEDIATELY.
    IF BREATHING STOPPED, GIVE CPR & KEEP WARM & QUIET. EYE: FLUSH WITH
    LARGE AMOU NTS OF WATER FOR 15 MIN LIFTING UPPER/LOWER LIDS
    CONTINUOUSLY. SKIN: REMOVE CONTAMINATED CLOTHING & WASH AFFECTED
    AREA WITH SOAP & WATER. GET MEDICAL ATTENTION IMMEDIATELY FOR ANY
    OF THESE CONDITIONS.

=====================  Fire Fighting Measures  =====================

Flash Point:24F/-4C
Lower Limits:SEE INGRED
Upper Limits:SEE INGRED
Extinguishing Media:USE CARBON DIOXIDE, FOAM, OR DRY CHEMICAL FOR
    FLAMMABLE LIQUID FIRES.  POLYMER FOAM IS PREFERRED FOR LARGE FIRES.
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE, BUT MAY BE USED TO
    COOL EXPOSED CONTAINERS TO PREVENT PRESSURE BUILDUP & POSSIBLE
    AUTO-IGNITE EXPLOSION. USE FOG NOZZLES WITH WATER.
Unusual Fire/Explosion Hazard:OVEREXPOSURE TO DECOMPOSITION PRODUCTS
    MAY CAUSE A HEALTH HAZARD.	SYMPTOMS MAY NOT BE IMMEDIATELY
    APPARENT.  OBTAIN MEDICAL ATTENTION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:KEEP SPECTATORS AWAY. ELIMINATE ALL IGNITE
    SOURCES, CONTAIN SPILL WITH INERT MATERIAL, TRANSFER LIQUID TO
    COVERED METAL CONTAINERS FOR DISPOSAL. USE ONLY NON-SPARK TOOLS.
    PREVENT CONTAMINATION OF SEWE RS, STREAMS & GROUNDWATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 95 DEGREES F. 
    STORE LARGE QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106.
Other Precautions:EMPTY CONTAINERS SHOULD NOT BE WASHED OR REUSED FOR
    ANY PURPOSE AND SHOULD BE GROUNDED & BONDED TO RECEIVING CONTAINER.
    DO NOT WELD, BRAZE OR CUT ON EMPTY CONTAINER. NEVER USE PRESSURE TO
    EMPTY. DISPO SE AS HAZARDOUS WASTE, IGNITABLE, D001.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN WELL VENTILATED AREAS, RESPIRATORY PROTECTION
    MAY NOT BE REQUIRED. IN RESTRICTED AREAS USE A NIOSH APPROVED
    CHEMICAL CARTRIDGE RESPIRATOR. FOR SPRAYING USE MECH PREFILTER. IN
    CONFINED AREAS USE NIO SH/MSHA APPR AIR SUPPLIED RESPIRATOR.
Ventilation:DILUTE & LOCAL EXHAUST RECOMMENDED TO CONTROL CONCENTRATE
    OF HAZARDOUS INGREDIENTS.
Protective Gloves:WEAR SOLVENT IMPERMEABLE GLOVES.
Eye Protection:WEAR SAFETY SPECTACLES.
Work Hygienic Practices:DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER
    EACH USE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:175 TO 312F
Vapor Density:> THAN AIR
Spec Gravity:.9
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:73

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
    IGNITION.
Hazardous Decomposition Products:BURNING, HEAT BY WELDING OR CUTTING,
    WILL PRODUCE SMOKE, CARBON MONOXIDE AND CARBON DIOXIDE.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT SPARKS AND
    FLAME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN I/A/W FEDERAL, STATE & LOCAL LAWS.
    INCINERATE ONLY IN EPA PERMITTED FACILITY. DO NOT INCINERATE CLOSED
    CONTAINERS. OBSERVE PRECAUTIONS FOR DISP OF FLAMMABLE MATERIALS.
    CONTAMINATED ABSOR BENT MAY BE DISPOSED IN A HAZARD WASTE LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***