=====================  Product Identification  =====================

MSDS NAME:ADHESIVE 85 RESIN
NIIN:01-130-6004
Kit Part:Y
MSDS Number: BJFRV
=== Responsible Party ===
Company:FLUORO-PLASTICS INC
Address:G AND VENANGO STS
City:PHILADELPHIA
State:PA
ZIP:19134
Country:US
Info Phone Num:215-425-5500
Emergency Phone Num:215-425-5500
CAGE:07658
=== Contractor Identification ===
Company:FLUORO-PLASTICS INC
Address:G AND VENANGO STS
Box:City:PHILADELPHIA
State:PA
ZIP:19134
Country:US
CAGE:07658

=============  Composition/Information on Ingredients  =============

Name:EPICHLOROHYDRIN & BISPHENOL A
CAS:25036-25-3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN & EYES: MILD IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION, SENSITIZATION & DERMATITIS.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH WITH SOAP & WATER. EYES: FLUSH WITH WATER.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:465F,241C
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION & COMBUSTION PRODUCTS MAY
    BE TOXIC.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP IN ABSORBENT MATERIAL OR SCRAPE UP.
    RESIDUAL CAN BE REMOVED WITH NON FLAMMABLE SOLVENT SUCH AS
    METHYLENE CHLORIDE (MFR). RECOMMEND METHYLENE CHLORIDE NOT BE USED
    FOR THIS PURPOSE .
Neutralizing Agent:SEE ABOVE

======================	Handling and Storage  ======================

Handling and Storage Precautions:PRACTICE GOOD CAUTION AND PERSONAL
    CLEANLINESS TO AVOID SKIN & EYE CONTACT. STORE IN COOL DRY AREA IN
    CLOSED CONTAINERS.
Other Precautions:AVOID BREATHING VAPORS OF HEATED MATERIAL. PROMPTLY
    REMOVE WET CONTAMINATED NON-IMPERVIOUS CLOTHING, DESTROY
    CONTAMINATED LEATHER & ABSORBENT SHOES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:ORGANIC CHEMICAL CARTRIDGE RESPIRATOR, IF
    NEEDED.
Ventilation:LOCAL EXHAUST, MECHANICAL
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR APPROPRIATE EQUIPMENT TO PREVENT
    SKIN/EYE CONTACT. USE OF BARRIER CREAM RECOMMENDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.16
Solubility in Water:NONE
Appearance and Odor:WHITE TO YELLOW LIQUID TO SEMI-SOLID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEATING OVER LONG PERIODS OF
    TIME DEGRADES THE RESIN. FIRE CONDITIONS INCREASE VISCOSITY & EEW.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
    ALDEHYDES.
Conditions to Avoid Polymerization:WITH ALIPHATIC AMINES IN MASSES
    GREATER THAN 1 POUND.

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURN IN ADEQUATE INCINERATOR OR BURY IN AN
    APPROVED LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***