===================== Product Identification =====================
MSDS NAME:100 CLEAR PART A
NIIN:00-959-1853
Kit Part:Y
MSDS Number: BJFQV
=== Responsible Party ===
Company:PETERSON CHEMICAL CORPORATION
Address:710 FOREST AVENUE
Box:102
City:SHEBOYGAN FALLS
State:WI
ZIP:53085
Country:US
Info Phone Num:800-558-7596
Emergency Phone Num:414-467-2471
CAGE:33961
=== Contractor Identification ===
Company:TORGINOL INC
Address:710 FOREST AVE
Box:102
City:SHEBOYGAN FALLS
State:WI
ZIP:53085-0102
Country:US
Phone:920-467-2471
CAGE:33961
Company:VALSPAR CORPORATION
Address:1101 THIRD ST SOUTH
Box:City:MINNEAPOLIS
State:MN
ZIP:55415
Country:US
Phone:612-332-7371/800-228-5635
CAGE:13418
============= Composition/Information on Ingredients =============
Name:METHYL ISOBUTYL KETONE (SARA III)
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 14%
Other REC Limits:ACIGIH/STEL 300MG/M3
OSHA PEL:100 PPM/75 STEL
ACGIH TLV:50 PPM/75 STEL; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 34%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:BISPHENOL A EPICHLOROHYDRIN RESIN
CAS:25036-25-3
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3
Name:METHYL ISOAMYL KETONE
CAS:110-12-3
RTECS #:MP3850000
OSHA PEL:100 PPM
ACGIH TLV:50 PPM; 9293
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRITATING MAY INJURE EYE TISSUE
IF NOT REMOVED PROMPTLY. SKIN: MAY IRRITATE AND CAUSE DERMATITIS.
INH: MAY CAUSE DIFFICULTY BREATHING, DIZZINESS AND HEADACHES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:AS A PRECAUTION, EXPOSURE TO LIQUIDS, VAPORS,
MISTS OR FUMES SHOULD BE MINIMIZED.
Medical Cond Aggravated by Exposure:RESPIRATORY DISORDERS AND SKIN
ALLERGIES. POTENTIAL FOR NERVOUS SYSTEM, KIDNEY OR LIVER DAMAGE.
======================= First Aid Measures =======================
Eyes: FLUSH EYES W/ LARGE AMOUNTS OF WATER FOR AT LEAST 15
MIN. IF IRRITATION PERSISTS GET MD. WASH SKIN W/ SOAP AND WATER AND
REMOVE CONTAM CLOTHING. IF IRRITATION PERSISTS GET MD. INHALE: MOVE
TO FR ESH AIR. IF BREATHING DIFFICULT/STOP ADMIN CPR/OXYGEN. GET MD
INGEST: OBTAIN IMMEDIATE MD.
===================== Fire Fighting Measures =====================
Flash Point:76.0F,24.4C
Lower Limits:1.0
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE (CO*2)
Fire Fighting Procedures:SCBA SHOULD BE AVAILABLE FOR FIRE FIGHTERS.
COOL FIRE-EXPOSED CONT W/WATER. FLASHBACK ALONG VAPOR TRAIL MAY
OCCUR. VAPOR MAY EXPLODE IF IGNITED IN ENCLOSED AREA
Unusual Fire/Explosion Hazard:KEEP PROD AWAY FROM IGNIT SOURCES, SUCH
AS HEAT, SPARKS, PILOT LIGHTS, STATIC ELECTRIC&OPEN FLAME. TOXIC
FUMES WILL BE EVOLVED WHEN THIS MAT INVOLVED IN FIRE.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE IGNITION SOURCES. KEEP PEOPLE AWAY.
STOP LEAK. DIKE AND CONTAIN SPILL, KEEP OUT OF WATERWAYS/SEWERS.
RECOVER FREE PRODUCT. MIN. BREATHING VAPORS/SKIN CONTACT. VENTILATE
CONFINED SPACES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED WHEN
NOT IN USE. DO NOT TRANSFER MATERIAL TO UNMARKED CONTAINERS.
CONTAINERS MAY BE HAZARDOUS WHEN EMPTY.
Other Precautions:SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES
(VAPOR, LIQUID, AND/OR SOLID), ALL HAZARD PRECAUTIONS GIVEN IN THE
DATA SHEET MUST BE OBSERVED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHERE CONCENTRATIONS IN AIR EXCEED EXPOSURE
GUIDELINES USE NIOSH/MSHA APPROVED RESPIRATOR W/ ORGANIC VAPOR
CARTRIDGE AND DUST FILTER. USE SCBA IN CONFINED SPACES.
Ventilation:USE ONLY WHEN > RECOMMENDED EXPOSURE LIMITS OR
CONCENTRATION BUILD UP OCCURS. USE EXPLOSION PROOF EQUIP&GROUND
CONTAINER
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES W/ SIDE SHIELDS
Other Protective Equipment:WEAR FULL BODY PROTECTIVE CLOTHING
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:237F,114C
Vapor Pres:25 MM HG
Vapor Density:> AIR
Spec Gravity:.97
Evaporation Rate & Reference:< ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:53.3
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/ STRONG OXIDANTS
Stability Condition to Avoid:REACTION W/ SOME EPOXY RESINS/CURING
AGENTS MAY PRODUCE CONSIDERABLE HEAT.
Hazardous Decomposition Products:TOXIC FUMES WILL BE EVOLVED WHEN THIS
MATERIAL IS INVOLVED IN A FIRE. INCLUDING CARBON MONOXIDE AND
CARBON DIOXIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:ALL CONTAINERS SHOULD BE DISPOSED OF IN AN
ENVIRONMENTALLY SAFE MANNER AND I/A/W ALL GOVT REGS. DRUMS SHOULD
BE RECONDITIONED BY CERTIFIED FIRMS OR PROPERLY DISPOSED OF BY
APPROVED FIRMS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|