MATERIAL SAFETY DATA SHEET MSDS Number 428096CB
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name: DRAX PBS NUTRABAIT - EPA REGISTRATION # 9444-131
Waterbury Companies, Inc.
Manufactured by: 24-Hour Emergency Contact:
P.O. Box 640 800-424-9300 or 703-527-3887
(CHEMTREC)
Independence, LA 70443
2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components greater than 1.0% (0.1% if carcinogen or suspected carcinogen)
% by wt.
Component CAS# OSHA PEL ACGIH TLV Other Limits
Orthoboric Acid (Boric Acid) 10043-35-3 N.E. N.E. N.E. 5
3. HAZARDS IDENTIFICATION
Contents under pressure, do not expose to fire or extreme heat.
It is a violation of federal law to use this product in a manner inconsistent with its labeling. Read label.
Potential Health Effects:
Routes of Entry: Inhalation: Yes Ingestion: Yes Skin: Yes
Health Hazards: Large amounts absorbed into blood stream from ingestion or through damaged skin may result in erythema, macular
rash, nausea, diarrhea, dizziness, depression, CNS effects after 24 hours, through broken skin or 36-72 hours from
ingestion. May cause slight irritation to broken skin. Animal studies have shown that ingestion of large amounts of
Borates over prolonged periods of time causes a decrease in sperm production and testicle size in male laboratory
animals and developmental effects in fetuses of pregnant female laboratory animals. No evidence of such effects in
humans.
Signs/symptoms Boric Acid - INGESTION: Acute oral LD50 (rats) 3.16 g/Kg. May cause nausea, vomiting, diarrhea in doses >15gms.
of overexposure: EYES: May cause slight, reversible conjunctivitis. SKIN: May cause slight irritation on damaged skin. Acute dermal
LD50 >2g/Kg (rabbits).
Medical conditions aggravated None known.
by exposure:
0 Health: 1 0
NFPA Hazard Ratings Fire: Reactivity:
NFPA 704 Ratings are subject to interpretation and are only intended for general identification of the level of the specific hazard. All
information must be considered for proper safe handling of the material.
4. FIRST AID MEASURES
IF SWALLOWED: Call a doctor or Poison Control Center for treatment advice. Have person sip a glass of water if able to swallow. Do
not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious person.
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after 5
minutes then continue rinsing eye. Call a physician if irritation persists. IF ON SKIN OR CLOTHING: Take off contminated clothing.
Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice. NOTE TO
PHYSICIAN: After ingestion or absorption into the bloodstream of large amounts (> 15gms.), symptoms may appear in 24-72 hours.
Borates are readily dissipated through the urine (70% in the first 24 hours).
5. FIRE FIGHTING MEASURES
Extinguishing Media: N/A
Fire Fighting Procedures: None Required.
Unusual Fire and Explosion Hazards: None Known - Product is an inherent fire retardant.
6. ACCIDENTAL RELEASE MEASURES
Sweep or vacuum. Flush area with water.
7. HANDLING AND STORAGE
Do not use in edible product areas of food handling establishments, restaurants, or other areas while food is exposed. Do not
contaminate water, food or feed by storage or disposal. Apply only in areas inaccessible to children and pets. Store in a cool, dry area
away from heat or open flame; extended storage at elevated temperatures may affect product consistency.
NFPA 30B Aerosol Classification: Level 1 Aerosol
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Protective Gloves: Not required - avoid contact with skin.
Eye Protection: Not required - avoid contact with eyes.
Respiratory Protection: N/A
Ventilation: Local: Not required.
Mechanical: Not required.
Other protective equipment: None Required.
Protective Work/Hygiene Practices: Follow label instructions.
Revision Date 4/15/2003 Date Printed: 7/8/2003 Page 1 of 2
MATERIAL SAFETY DATA SHEET MSDS Number 428096CB
9. PHYSICAL AND CHEMICAL PROPERTIES
Specific Gravity (H2O=1): N.E. Flashpoint: Not applicable. LEL: N/A
Vapor Pressure (mm Hg): N.E. Boiling Point: N.E. Melting Point: N.E. UEL: N/A
Solubility: Soluble Appearance/Odor: Yellow paste
10. STABILITY AND REACTIVITY
Conditions to Avoid: Contact with acetic anhydride or elemental potassium.
Incompatible Materials: Acetic anhydride, elemental potassium.
Hazardous Decomposition By-products: None known.
Hazardous Polymerization Conditions: None known.
11. TOXICOLOGICAL INFORMATION
This product contains no chemicals that are listed on the NTP, IARC, or OSHA carcinogen lists. Any further information on the
toxicology of the material can be obtained by contacting the manufacturer.
12. ECOLOGICAL INFORMATION
Please call the manufacturer for questions concerning the ecological effects of this product and it's constituents.
13. DISPOSAL CONSIDERATIONS
Do not puncture or incinerate! IF EMPTY: Place in trash or offer for recycling if available. IF PARTLY FILLED: Call your local solid
waste agency or 1-800-CLEANUP for disposal instructions.
14. TRANSPORT INFORMATION
Status Shipping Name Class ID Numbe Pack Grp
DOT (USA): Regulated Consumer Commodity (per 49CFR173.306) ORM-D N/A N/A
IATA (Air): Regulated Consumer Commodity 9 ID8000 N/A
IMDG (Vessel): Regulated Aerosols 2 UN1950 N/A
National Motor Freight Classification and LTL Class: 57100 Sub 3 Class 60
15. REGULATORY INFORMATION
When completing Tier II reports, the following information should be used.
SARA Title III Section 312:
Note: See state and local regulations for specifics on reporting requirements for your facility.
This product should be described as: PURE: N MIXTURE: Y SOLID: Y LIQUID: N GAS: Y
Physical Hazards: FIRE: N PRESSURE: Y REACTIVITY: N Health Hazards: IMMEDIATE: Y DELAYED: N
16. OTHER INFORMATION
Product Sales Information: 800-845-3495
MSDS Information: 985-878-6751
Revision Notes: Updated storage and disposal and first aid to new EPA std.
MSDS Prepared by D.D.
N/A = Not Applicable N.E. = Not Established
This Information is provided in good faith, but no warranty, expressed or implied, is made. The manufacturer believes that it is
accurate and to the best of its knowledge, and relates only to the specific material designated herein.
Revision Date 4/15/2003 Date Printed: 7/8/2003 Page 2 of 2
|