MATERIAL SAFETY DATA
POLYMEDCO, Inc.
SHEET
1. Information of the substance/preparation and of the company
1.1 Commercial product name IgA (Immunoturbidimetric Assay)
Cat. No.: IA 400
POLYMEDCO, Inc.
1.2 Company:
510 Furnace Dock Road
Cortland Manor, NY 10567
1.3 In Emergencies: Tel: (914) 739-5400 Fax: (914) 739-5890
2. Chemical characterization/information on ingredients
Kit Contents: Contents Initial Concentrations of Solutions
1. Assay Buffer
Polyethylene Glycol maximum 6%
Tris/HCI buffer 20 mmol/l, pH 7.4
Sodium chloride 150 mmol/l
2. Antibody Reagent
Anti (human) IgA
3. Specific Protein Calibrator
Classification Xn (Harmful)
3. Hazards identification
Warnings: For in vitro diagnostic use only. Do not pipette by mouth. Exercise the normal
precautions required for handling laboratory reagents.
Buffer and antibody reagent both contain 0.1%(w/v) Sodium Azide. Avoid ingestion or
contact with skin or mucous membranes. In case of skin contact, flush affected area
with copious amounts of water. In case of contact with eyes or if ingested, seek
immediate medical attention.
Sodium Azide reacts with lead and copper plumbing, to form potentially explosive
azides. When disposing of such reagents flush with large volumes of water to prevent
azide build up. Exposed metal surfaces should be cleaned with 10% sodium
hydroxide.
The specific protein calibrator in this kit is of human origin. This serum has been
tested for the HIV (Human Immunodeficiency Virus) Antibody, HBs Ag and HCV and
found to be non-reactive. However as no method can offer complete assurance as to
the absence of infectious agents. This material and all patient samples should be
handled as though capable of transmitting infectious disease and disposed of
accordingly.
Date: 11/24/99 1 of 4 POLYMEDCO, Inc.
Commercial product name: IgA (Immunoturbidimetric Assay)
4. First aid measures
EYES Irrigate thoroughly with water for at least 10 minutes Obtain Medical
Attention
LUNGS Remove from exposure, rest and keep warm. In severe cases Obtain
Medical Attention
SKIN Wash off skin thoroughly with water. Remove contaminated clothing
and wash before re-use. In severe cases, Obtain Medical Attention
MOUTH Wash out mouth thoroughly with water and give plenty of water to
drink. Obtain Medical Attention
Direction for physician: Symptomatic treatment by a physician
5. Fire-fighting measures
Extinguishing media: No restrictions.
Thermal decomposition: Gases which are damaging to health do not form in dangerous quantities.
6. Accidental release measures
After spillage: PRECAUTIONS
If local regulations permit, mop up with plenty of water and run to
waste diluting greatly with running water. Otherwise, transfer to
container and arrange removal by disposal company. Wash site
spillage thoroughly with detergent and water.
For large spillages liquids should be contained with sand or earth and
both liquids and solids transferred to salvage containers. Any
residues should be treated as for small spillages.
If material has entered surface drains it may be necessary to inform
local authorities, including fire services if flammable.
Absorbent material: No restrictions.
7. Handling and storage
7.1 Handling: The normal precautions for handling chemicals must be observed.
7.2 Storage Store between +2 and +80C.
Do not store together: No restrictions.
8. Exposure controls/personal protection
Respiratory protection: None required
Eye protection: Safety glasses.
Hand protection: One way gloves (rubber or plastic)
Date: 11/24/99 2 of 4 POLYMEDCO, Inc.
Commercial product name: IgA (Immunoturbidimetric Assay)
9. Physical and chemical properties
Physical state: Liquid reagents.
Colour: Colourless
Odour: None
pH value:
Boiling point
Melting point:
Flash point:
Substance does not have any oxidising properties:
Ignition temperature
Explosion limits:
Vapour pressure:
Density:
Solubility in water:
in:
Viscosity
10. Stability and reactivity
Hazardous Reactions: None when used appropriately.
Hazardous decomposition products: Only small concentrations.
11. Toxicological information:
LD50 oral Not Known
LD50 intraperitoneal Not Known
LD50 skin Not Known
LC50 inhalation Not Known
toxicologic information: Not Known
12. Ecological information
Water hazard class: Data not yet available.
13. Disposal considerations: PRECAUTIONS
If local regulations permit, mop up with plenty of water and run to waste
diluting greatly with running water. Otherwise, transfer to container and
arrange removal by disposal company. Wash site spillage thoroughly with
detergent and water.
For large spillages liquids should be contained with sand or earth and both
liquids and solids transferred to salvage containers. Any residues should be
treated as for small spillages.
If material has entered surface drains it may be necessary to inform local
authorities, including fire services if flammable.
Date: 11/24/99 3 of 4 POLYMEDCO, Inc.
Commercial product name: IgA (Immunoturbidimetric Assay)
14. Transport Information
GGVE/GGVS: Data not yet available. RID/ADR Data not yet available.
ICAO/IATA-DGR: Data not yet available. UN-Nr.: Data not yet available.
IMDG-CODE: Data not yet available. MFAG Data not yet available.
EMS: Data not yet available.
15. Regulatory information
This product must be labelled in accordance with German 'Gefahrstoffverordnung'
(Federal Regulation on Hazardous Substance) and the appropriate EC directives.
Hazard symbol: Xn
Warnings Risk phrases R20, 21, 22
Precautions:
16. Other information
The information herein is believed to be correct as of the date hereof but is provided
without warranty of any kind. The recipient of our products is responsible for
observing any laws and guidelines applicable.
Date: 11/24/99 4 of 4 POLYMEDCO, Inc.
|