MATERIAL SAFETY DATA SHEET (MSDS)
SECTION I: IDENTIFICATION:
PRODUCT NAME: Polymedco Direct庐 LDL; Homogeneous LDL-C, LDL 500
(Two Component Reagent System)
FORMULA: DILUTE MIXTURE. (All preservatives and/or any potentially hazardous constituents are reported.)
The full chemical, physical, toxicological and carcinogenic properties of this
dilute mixture have not been thoroughly investigated.
Reagent 1 Name: Homogeneous LDL-C Reagent 1 (R1) Reagent 2 Name: Homogeneous LDL-C Reagent 2 (R2)
SECTION II:
No hazardous substance in reportable quantities. Contains 0.05% Sodium Azide
HAZARDOUS INGREDIENTS
Symbol: Not Required Not Required
Phases: Not Required Not Required
Toxicological Information: No evidence of any adverse toxicological No evidence of any adverse toxicological
problems. problems.
SECTION III: PHYSICAL DATA
Physical Description: Liquid Liquid
No spontaneous reaction will occur. No spontaneous reaction will occur.
SECTION IV:
Use water spray, foam, dry powder or CO2 as the Use water spray, foam, dry powder or CO2 as the
FIRE/EXPLOSION DATA
extinguishing medium. extinguishing medium.
Thermal decomposition of material is unlikely to Thermal decomposition of material is unlikely to
result in gases which are damaging to health. result in gases which are damaging to health.
The usual safety measures taken when handling The usual safety measures taken when handling
SECTION V: HEALTH HAZ. &
biological material should be observed. biological material should be observed.
EMERGENCY
First Aid: Rinse eyes immediately with water. Wash skin Rinse eyes immediately with water. Wash skin
thoroughly with soap and water. If accidentally thoroughly with soap and water. If accidentally
ingested or any topical symptoms are observed ingested or any topical symptoms are observed
seek medical advice immediately. seek medical advice immediately.
Essentially stable and nonreactive. Sodium azide has been reported to form explosive
SECTION VI: REACTIVITY
compounds when exposed to metallic materials
such as lead or copper plumbing.
SECTION VII: SPILL AND DISPOSAL
After spillage mop up with absorbent material, e.g. cotton wool or paper towel. Flush away with plenty of water to prevent accumulation
of azide build-up. The purchaser of this product is responsible for the disposal of product in a manner consistent with State and Federal
regulations.
SECTION VIII: PERSONAL PROTECTIVE EQUIPMENT
Prevent contact with skin and mucous membranes by wearing appropriate chemical resistant gloves, lab coat and safety glasses.
SECTION IX: HANDLING AND STORAGE
Store at temperature specified on bottle labels (2 - 8潞C). Keep container tightly closed and free from contamination.
SECTION X: MISCELLANEOUS DATA
The information provided herein is believed to be correct, however no warranties expressed or implied, are made regarding this
information. You should consider this as a supplement to other data gathered by you, and make independent determinations of the
suitability and completeness of the above information. The full chemical, physical, toxicological and carcinogenic properties of this
dilute mixture have not been thoroughly investigated. This material is intended for use by properly trained individuals, knowledgeable in
the use and interpretation of data gathered with the product; in disposal procedures required for biomedical waste; in personal safety and
health related techniques required in clinical labs.
Polymedco Inc., 510 Furnace Dock Road, Cortlandt Manor, NY, 10567, (914) 739-5400
|