Material Safety Data Sheet
Argon
Section 1. Chemical product and company identification
Product name : Argon
Supplier : AIRGAS INC., on behalf of its subsidiaries
259 North Radnor-Chester Road
Suite 100
Radnor, PA 19087-5283
1-610-687-5253
Product use : Synthetic/Analytical chemistry.
Synonym : argon, compressed
MSDS # : 001004
Date of : 3/27/2008.
Preparation/Revision
In case of emergency : 1-866-734-3438
Section 2. Hazards identification
Physical state : Gas. [COLORLESS, ODORLESS INERT GAS]
Emergency overview : WARNING!
CONTENTS UNDER PRESSURE.
Do not puncture or incinerate container.
Contact with rapidly expanding gases or liquids can cause frostbite.
Routes of entry : Inhalation
Potential acute health effects
Eyes : Contact with rapidly expanding gas may cause burns or frostbite.
Skin : Contact with rapidly expanding gas may cause burns or frostbite.
: Acts as a simple asphyxiant.
Inhalation
: Ingestion is not a normal route of exposure for gases
Ingestion
Potential chronic health : CARCINOGENIC EFFECTS: Not available.
effects MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
Medical conditions : Acute or chronic respiratory conditions may be aggravated by overexposure to this gas.
aggravated by over-
exposure
See toxicological information (section 11)
Section 3. Composition, Information on Ingredients
Name CAS number % Volume Exposure limits
Argon 7440-37-1 100 Simple asphyxiant.
Section 4. First aid measures
No action shall be taken involving any personal risk or without suitable training.If it is suspected that fumes are still present,
the rescuer should wear an appropriate mask or self-contained breathing apparatus.It may be dangerous to the person
providing aid to give mouth-to-mouth resuscitation.
Eye contact : Check for and remove any contact lenses. Immediately flush eyes with plenty of water
for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical
attention immediately.
Skin contact : In case of contact, immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Wash clothing before reuse. Clean
shoes thoroughly before reuse. Get medical attention immediately.
Frostbite : Try to warm up the frozen tissues and seek medical attention.
Build 1.1 Page: 1/6
Argon
Inhalation : Move exposed person to fresh air. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention
immediately.
Ingestion : As this product is a gas, refer to the inhalation section.
Section 5. Fire fighting measures
Flammability of the product : Non-flammable.
Products of combustion : No specific data.
Fire-fighting media and : Use an extinguishing agent suitable for the surrounding fire.
instructions
Apply water from a safe distance to cool container and protect surrounding area. If
involved in fire, shut off flow immediately if it can be done without risk.
Contains gas under pressure. In a fire or if heated, a pressure increase will occur and
the container may burst or explode.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
equipment for fire-fighters
Section 6. Accidental release measures
Personal precautions : Immediately contact emergency personnel. Keep unnecessary personnel away. Use
suitable protective equipment (section 8). Shut off gas supply if this can be done safely.
Isolate area until gas has dispersed.
Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers.
Methods for cleaning up : Immediately contact emergency personnel. Stop leak if without risk. Note: see section 1
for emergency contact information and section 13 for waste disposal.
Section 7. Handling and storage
Handling : High pressure gas. Do not puncture or incinerate container. Use equipment rated for
cylinder pressure. Close valve after each use and when empty. Protect cylinders from
physical damage; do not drag, roll, slide, or drop. Use a suitable hand truck for cylinder
movement.
Never allow any unprotected part of the body to touch uninsulated pipes or vessels that
contain cryogenic liquids. Prevent entrapment of liquid in closed systems or piping
without pressure relief devices. Some materials may become brittle at low temperatures
and will easily fracture.
Storage : Cylinders should be stored upright, with valve protection cap in place, and firmly secured
to prevent falling or being knocked over. Cylinder temperatures should not exceed 52 掳C
(125 掳F).
Section 8. Exposure controls/personal protection
Engineering controls : Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or
other engineering controls to keep worker exposure to airborne contaminants below any
recommended or statutory limits.
Personal protection
Eyes : Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts.
When working with cryogenic liquids, wear a full face shield.
Skin : Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before handling
this product.
Respiratory : Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Build 1.1 Page: 2/6
Argon
The applicable standards are (US) 29 CFR 1910.134 and (Canada) Z94.4-93
Hands : Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
Insulated gloves suitable for low temperatures
Personal protection in case : Self-contained breathing apparatus (SCBA) should be used to avoid inhalation of the
product.
of a large spill
Product name
argon Simple asphyxiant.
Consult local authorities for acceptable exposure limits.
Section 9. Physical and chemical properties
Molecular weight : 39.95 g/mole
Molecular formula : Ar
Boiling/condensation point : -185.7掳C (-302.3掳F)
Melting/freezing point : -189.2掳C (-308.6掳F)
Critical temperature : -122.4掳C (-188.3掳F)
Vapor density : 1.38 (Air = 1)
Specific Volume (ft 3/lb) : 9.70874
Gas Density (lb/ft 3) : 0.103
Section 10. Stability and reactivity
Stability and reactivity : The product is stable.
Hazardous decomposition : Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
products
Hazardous polymerization : Under normal conditions of storage and use, hazardous polymerization will not occur.
Section 11. Toxicological information
Toxicity data
Other toxic effects on : No specific information is available in our database regarding the other toxic effects of
this material to humans.
humans
Specific effects
Carcinogenic effects : No known significant effects or critical hazards.
Mutagenic effects : No known significant effects or critical hazards.
Reproduction toxicity : No known significant effects or critical hazards.
Section 12. Ecological information
Aquatic ecotoxicity
Not available.
Environmental fate : Not available.
Environmental hazards : No known significant effects or critical hazards.
Toxicity to the environment : Not available.
Section 13. Disposal considerations
Product removed from the cylinder must be disposed of in accordance with appropriate Federal, State, local
regulation.Return cylinders with residual product to Airgas, Inc.Do not dispose of locally.
Build 1.1 Page: 3/6
Argon
Section 14. Transport information
Regulatory UN number Proper shipping Class Packing group Label Additional
information name information
DOT Classification UN1006 ARGON, 2.2 Not applicable (gas). Limited
COMPRESSED quantity
NON - FLAMMABLE GAS
Yes.
2
UN1951 Argon, refrigerated Packaging
liquid instruction
Passenger
aircraft
Quantity
limitation: 75
kg
Cargo aircraft
Quantity
limitation: 150
kg
TDG Classification UN1006 ARGON, 2.2 Not applicable (gas). Explosive
COMPRESSED Limit and
Limited
2
Quantity
UN1951 Argon, refrigerated Index
liquid 0.125
Passenger
Carrying
Road or Rail
Index
75
Special
provisions
42
Mexico UN1006 ARGON, 2.2 Not applicable (gas). -
COMPRESSED
Classification NON - FLAMMABLE GAS
2
UN1951 Argon, refrigerated
liquid
Section 15. Regulatory information
United States
U.S. Federal regulations : United States inventory (TSCA 8b): This material is listed or exempted.
SARA 302/304/311/312 extremely hazardous substances: No products were found.
SARA 302/304 emergency planning and notification: No products were found.
SARA 302/304/311/312 hazardous chemicals: argon
SARA 311/312 MSDS distribution - chemical inventory - hazard identification:
argon: Sudden release of pressure
Clean Water Act (CWA) 307: No products were found.
Clean Water Act (CWA) 311: No products were found.
Clean Air Act (CAA) 112 accidental release prevention: No products were found.
Clean Air Act (CAA) 112 regulated flammable substances: No products were found.
Clean Air Act (CAA) 112 regulated toxic substances: No products were found.
Build 1.1 Page: 4/6
Argon
State regulations : Connecticut Carcinogen Reporting: This material is not listed.
Connecticut Hazardous Material Survey: This material is not listed.
Florida substances: This material is not listed.
Illinois Chemical Safety Act: This material is not listed.
Illinois Toxic Substances Disclosure to Employee Act: This material is not listed.
Louisiana Reporting: This material is not listed.
Louisiana Spill: This material is not listed.
Massachusetts Spill: This material is not listed.
Massachusetts Substances: This material is listed.
Michigan Critical Material: This material is not listed.
Minnesota Hazardous Substances: This material is not listed.
New Jersey Hazardous Substances: This material is listed.
New Jersey Spill: This material is not listed.
New Jersey Toxic Catastrophe Prevention Act: This material is not listed.
New York Acutely Hazardous Substances: This material is not listed.
New York Toxic Chemical Release Reporting: This material is not listed.
Pennsylvania RTK Hazardous Substances: This material is listed.
Rhode Island Hazardous Substances: This material is not listed.
Canada
WHMIS (Canada) : Class A: Compressed gas.
CEPA Toxic substances: This material is not listed.
Canadian ARET: This material is not listed.
Canadian NPRI: This material is not listed.
Alberta Designated Substances: This material is not listed.
Ontario Designated Substances: This material is not listed.
Quebec Designated Substances: This material is not listed.
Section 16. Other information
United States
Label requirements : CONTENTS UNDER PRESSURE.
Canada
Label requirements : Class A: Compressed gas.
Hazardous Material : Health 1
Information System (U.S.A.)
0
Flammability
0
Physical hazards
liquid:
3
Health
0
Fire hazard
0
Reactivity
x
Personal protection
National Fire Protection :
Flammability
0
Association (U.S.A.)
1 0
Health Instability
Special
liquid:
Build 1.1 Page: 5/6
Argon
Flammability
0
3 0
Health Instability
Special
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.
Build 1.1 Page: 6/6
|