MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
PRODUCT IDENTIFICATION NUMBER (PIN):
PRODUCT IDENTIFIER
Ichthammol IC100X
PRODUCT USE
Topical anti-infective
MANUFACTURERS NAME: SUPPLIERS NAME:
Xenex Labs XENEX LABORATORIES INC.
STREET ADDRESS: STREET ADDRESS:
2402 CANOE AVENUE
CITY: PROVINCE: CITY: PROVINCE:
COQUITLAM B.C.
POSTAL CODE: EMERGENCY TELEPHONE NO: POSTAL CODE: EMERGENCY TELEPHONE NO:
SPE100 V3K 6C2 (CHEMTREC) 1-800-424-9300
SECTION 2 - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % CAS NUMBER LD50 OF INGREDIENT
(SPECIFY SPECIES) (SPECIFY ROUTE AND DOSE)
Ichthammol 100 8029-68-3 Not Available Not Available
SECTION 3 - PHYSICAL DATA
PHYSICAL STATE ODOR AND APPEARANCE ODOR THRESHOLD (ppm)
Liquid Dark color liquid with strong odor Not Available
FREEZING POINT (C) MELTING POINT (C) BOILING POINT (C) VOLATILITY SPECIFIC GRAVITY
Not Available 5掳C (41掳F) 103掳C (217.4掳F) Not Available 1.1 (Water = 1)
VAPOR PRESSURE VAPOR DENSITY EVAPORATION RATE COEFF. WATER/OIL DIST. pH
Not Available Not Available Not Available Not Available Not Available
SECTION 4 - FIRE AND EXPLOSION DATA
NO YES
FLAMMABILITY IF YES, UNDER WHAT CONDITIONS?
May be combustible at high temperature
MEANS OF EXTINCTION
SMALL: Use DRY chemical powder.
LARGE: Use water spray, fog or foam. Do NOT use water jet.
UPPER FLAMMABLE LIMIT (% BY VOLUME)
FLASHPOINT (C) AND METHOD LOWER FLAMMABLE LIMIT (% BY VOLUME)
Not Available Not Available Not Available
AUTOIGNITION TEMPERATURE (C) HAZARDOUS COMBUSTION PRODUCTS
Not Available Not Available
SECTION 5 - REACTIVITY DATA
YES NO IF NO, UNDER WHICH CONDITIONS?
CHEMICAL STABILITY
The product is stable
NO YES
INCOMPATIBILITY WITH OTHER SUBSTANCES IF SO, WHICH ONES?
Not Available
REACTIVITY, AND UNDER WHAT CONDITIONS
Not Available
HAZARDOUS DECOMPOSITION PRODUCTS
The products of degradation are more toxic
MATERIAL SAFETY DATA SHEET
IC100X
PRODUCT IDENTIFIER
Ichthammol
SECTION 6 - TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY
INGESTION
INHALATION
SKIN CONTACT SKIN ABSORPTION EYE CONTACT
EFFECTS OF ACUTE EXPOSURE TO PRODUCT
Very hazardous in case of ingestion, of inhalation. Hazardous in case of skin contact (irritant), of eye contact (irritant).
Slightly hazardous in case of skin contact (permeator)
EFFECTS OF CHRONIC EXPOSURE TO PRODUCT
The substance is toxic to lungs, mucous membranes. Repeated or prolonged exposure to the substance can produce
target organs damage
EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION OF PRODUCT CARCINOGENICITY
Not Available Yes Not Available Not Available
REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS
TERATOGENICITY
Not Available Not Available Not Available Not Available
SECTION 7 - PREVENTATIVE MEASURE
PERSONAL PROTECTIVE EQUIPMENT
GLOVES (SPECIFY) RESPIRATOR (SPECIFY) EYE (SPECIFY)
Yes ( impervious ) Organic vapor respirator Safety goggles, face shield
FOOTWEAR (SPECIFY) CLOTHING (SPECIFY) OTHER (SPECIFY)
No Coveralls / Lab coat Eyewash equipment nearby
ENGINEERING CONTROLS (SPECIFY eg. VENTILATION, ENCLOSED PROCESS)
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that
eyewash stations and safety showers are proximal to the work-station location
LEAK AND SPILL PROCEDURE
Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading
water on the contaminated surface and allow to evacuate through the sanitary system
WASTE DISPOSAL
According to local, provincial, and federal regulations.
HANDLING PROCEDURES AND EQUIPMENT
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all
equipment containing material. Do not breathe gas/fumes/ vapor/spray. Wear suitable protective clothing In case of insufficient ventilation, wear
suitable respiratory equipment If you feel unwell, seek medical attention and show the label when possible. Avoid contact with skin and eyes
STORAGE REQUIREMENTS
Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly closed. Keep in a cool, well-ventilated
place. Combustible materials should be stored away from extreme heat and away from strong oxidizing agents
SPECIAL SHIPPING INFORMATION
WHMIS (Canada): CLASS D-2A: Material causing other toxic effects (VERY TOXIC).
SECTION 8 - FIRST AID MEASURES
SPECIFIC MEASURES
After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the
SKIN
contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds,
crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If
irritation persists, seek medical attention. Wash contaminated clothing before reusing
Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15
EYES
minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical
attention.
Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
INHALATION
Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is
INGESTION
not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention
IF IRRITATION PERSISTS AND IN ALL OTHER CASES, GET IMMEDIATE MEDICAL ATTENTION.
SECTION 9 - PREPARATION DATE OF M.S.D.S.
PREPARED BY (GROUP, DEPARTMENT, ETC.) PHONE NUMBER DATE:
CONTROL DEPARTMENT (604) 552 3031 September 25 2006
|