MATERIAL SAFETY DATA SHEET
AB Aqua-Prep
1. Product And Company Identification
Supplier Manufacturer
Applied Biochemists (WI) Advantis Technologies, Inc.
A division of Advantis Technologies, Inc. 1400 Bluegrass Lakes Parkway
W175 N11163 Stonewood Drive, Suite 234 Alpharetta, GA 30004 United States
Germantown, WI 53022
Telephone Number: (262) 255-4449 Telephone Number: (770) 521-5999
FAX Number: (262) 255-4268 FAX Number: (770) 521-5959
Web Site: www.appliedbiochemists.com Web Site: www.poolspacare.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC - DAY OR NIGHT: (800) 424-9300 CHEMTREC - DAY OR NIGHT: (800) 424-9300
Issue Date: 11/02/2006
Product Name: AB Aqua-Prep
CAS Number: Not Established
Chemical Family: A concentrated non-bacterial, readily biodegradable, enzymatic solution
Chemical Formula: Proprietary
MSDS Number: 364
2. Composition/Information On Ingredients
Ingredients listed in this section have been determined to be hazardous as defined in 29CFR 1910.1200. Materials
determined to be health hazards are listed if they comprise 1% or more of the composition. Materials identified as
carcinogens are listed if they comprise 0.1% or more of the composition. Information on proprietary materials is available in
29CFR 1910.1200(i)(1).
3. Hazards Identification
Primary Routes(s) Of Entry
Product may enter the body via eye contact, skin contact and ingestion.
Eye Hazards
Eye contact with product may cause irritation. Avoid eye contact with the product.
Skin Hazards
Skin contact with the product may cause irritation. Avoid skin contact with product.
Ingestion Hazards
Swallowing may cause irritation of throat and mouth. It may also cause nausea. Do not taste or swallow product.
4. First Aid Measures
Eye
Immediately flush eyes with a directed stream of water for at least 15 minutes while forcibly holding eyelids apart to
ensure complete irrigation of all eye and lid tissue. Get immediate medical attention if irritation occurs.
Skin
Flush skin with water and wash with soap and water. If clothing is penetrated immediately remove clothing and flush
skin with water. Wash clothes before reuse. Get prompt medical attention if irritation occurs.
Ingestion
Give 2 glasses of water. Do not induce vomiting. If spontaneous vomiting is inevitable, prevent aspiration by keeping
victim's head below the knees. Get immediate medical attention. Never give anything by mouth to an unconscious
victim.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
AB Aqua-Prep
4. First Aid Measures - Continued
Inhalation
Remove to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and get medical
attention immediately.
5. Fire Fighting Measures
Flash Point: >212 掳F >100 掳C
Flash Point Method: Open Cup
Flammability Class: non-flammable
Extinguishing Media
Water fog or fine spray, carbon dioxide, dry chemical or foam.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear. Water can be used to cool and
protect exposed material. Turn off electrical service to eliminate source of ignition.
6. Accidental Release Measures
Contain spill. Prevent runoff from entering drains, sewers, or streams. Dispose in accordance with all applicable federal,
state, and local health and environmental regulations
7. Handling And Storage
Handling And Storage Precautions
Keep container closed when handling or storing.
Storage Precautions
Store this product below 120F (49C), preferably below 75F (24C), in a cool, dry, well ventilated area away from heat,
sparks, flame, oxidizers and out of direct sunlight. For best results use within 12 months. Never comingle with
bactericides or quaternary disinfectants, as they will degrade/inactivate enzymes.
8. Exposure Controls/Personal Protection
Engineering Controls
Local exhaust acceptable. Special exhaust not required.
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Skin Protection
Chemical-resistant gloves.
9. Physical And Chemical Properties
Appearance
Translucent, dark reddish-brown liquid
Odor
Mild
Chemical Type: Mixture
Physical State: Liquid
Boiling Point: >212 掳F >100 掳C
Specific Gravity: 1.010-1.020 @ 77F (25C)
Percent VOCs: Negligible
Vapor Pressure: <0.01 mm Hg @ 68F (20C)
Vapor Density: >1 (air = 1)
pH Factor: 3.25-4.20
Solubility: Soluble
Page 2 of 4
MATERIAL SAFETY DATA SHEET
AB Aqua-Prep
9. Physical And Chemical Properties - Continued
Odor - Continued
Viscosity: ~47.1 - 38.7 cps @ 77F (25C)
Evaporation Rate: <0.01 (N-butyl acetate = 1)
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not cccur
Conditions To Avoid (Stability)
See section on Handling and Storage
Incompatible Materials
Avoid contact with strong oxidizing and reducing agents.
Hazardous Decomposition Products
Not known
11. Toxicological Information
Acute Studies
Not determined
12. Ecological Information
Ecotoxicological Information
Not determined
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.
14. Transport Information
Proper Shipping Name
Not regulated
Hazard Class
None assigned
DOT Identification Number
NONE
15. Regulatory Information
No Data Available...
NFPA HMIS
HEALTH 1
0
FLAMMABILITY 0
1 0
REACTIVITY 0
B
PERSONAL PROTECTION
16. Other Information
Revision/Preparer Information
MSDS Preparer: JHW
Page 3 of 4
MATERIAL SAFETY DATA SHEET
AB Aqua-Prep
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no warranties
and make no representations as to the accuracy or completeness of the information contained therein,
and assume no responsibility regarding the suitablility of this information for the user's intended purposes
or for the consequences of its use. Each individual should make a determination as to the suitability of
the information for their particular purposes(s).
Applied Biochemists (WI)
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|