MATERIAL SAFETY DATA SHEET
AB Bacti-Klear Liquid
1. Product And Company Identification
Supplier Manufacturer
Applied Biochemists (WI) Advantis Technologies, Inc.
A division of Advantis Technologies, Inc. 1400 Bluegrass Lakes Parkway
W175 N11163 Stonewood Drive, Suite 234 Alpharetta, GA 30004 United States
Germantown, WI 53022
Telephone Number: (262) 255-4449 Telephone Number: (770) 521-5999
FAX Number: (262) 255-4268 FAX Number: (770) 521-5959
Web Site: www.appliedbiochemists.com Web Site: www.poolspacare.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC - DAY OR NIGHT: (800) 424-9300 CHEMTREC - DAY OR NIGHT: (800) 424-9300
Issue Date: 03/05/2008
Product Name: AB Bacti-Klear Liquid
CAS Number: Not Established
MSDS Number: 389
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
TETRASODIUM ETHYLENEDIAMINETETRAACETATE 64-02-8
VIABLE BACTERIAL CULTURES Not Establish
Ingredients listed in this section have been determined to be hazardous as defined in 29CFR 1910.1200. Materials
determined to be health hazards are listed if they comprise 1% or more of the composition. Materials identified as
carcinogens are listed if they comprise 0.1% or more of the composition. Information on proprietary materials is available in
29CFR 1910.1200(i)(1).
3. Hazards Identification
Eye Hazards
May cause eye irritation.
Skin Hazards
Prolonged contact may cause mild skin irritation.
Ingestion Hazards
Ingestion may result in abdominal pain, nausea and vomiting.
Inhalation Hazards
Inhaling mist from this product may cause irritation to the lungs and mucous membranes.
Conditions Aggravated By Exposure
None known, however persons with respiratory problems should avoid breathing any mist from the product.
Conditions Aggravated By Overexposure
None known.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
AB Bacti-Klear Liquid
3. Hazards Identification - Continued
First Aid (Pictograms)
4. First Aid Measures
Eye
Rinse eyes with water for fifteen minutes. If irritation persists see a physician.
Skin
Wash the product off the skin with soap and water. If irritation develops seek the care of a physician.
Ingestion
Watch victim for any signs of illness, induce vomiting only if advised by a physician.
Inhalation
Move person to fresh air and avoid breathing dust from product. If breathing problems develop, seek the care of a
physician.
Fire Fighting (Pictograms)
5. Fire Fighting Measures
Flash Point: NA 掳F
Flash Point Method: NA
Lower Explosive Limit: NA
Upper Explosive Limit: NA
Fire And Explosion Hazards
None known.
Extinguishing Media
Water spray, carbon dioxide, and dry chemical powder.
6. Accidental Release Measures
Contain and collect material, place in proper container for reuse or disposal. Dispose of materials in accordance with all
federal, state and local laws.
Handling & Storage (Pictograms)
7. Handling And Storage
Handling And Storage Precautions
Strong acids or alkali compounds may inactivate biological cultures.
Handling Precautions
Always wash hands with soap and water before handling food or smoking. Use good chemical hygeine practices
when working with any chemical.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
AB Bacti-Klear Liquid
7. Handling And Storage - Continued
Storage Precautions
Store in a location away from children, food items and potable water. Store in an area out of direct sunlight, keep
container closed when not in use, avoid storing in a damp environment.
Protective Clothing (Pictograms)
8. Exposure Controls/Personal Protection
Engineering Controls
Local exhaust should be sufficient. If used in a manner that creates a mist, mechanical ventilation may be
necessary.
Eye/Face Protection
Safety glasses with side shields or splach goggles are recommended.
Skin Protection
Disposable nitrile exam gloves are suitable for preventing prolonged contact with the skin are recommended.
Respiratory Protection
None required for normal use.
Other/General Protection
None required, however, avoid prolonged contact with the skin from soiled clothing.
9. Physical And Chemical Properties
Appearance
Milky, opaque liquid
Odor
Slight
Chemical Type: Mixture
Physical State: Liquid
Specific Gravity: 0.998-1.002
pH Factor: 7.58-9.2
Solubility: Complete
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Incompatible Materials
Not known.
Hazardous Decomposition Products
Not known.
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
Page 3 of 4
MATERIAL SAFETY DATA SHEET
AB Bacti-Klear Liquid
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.
14. Transport Information
Proper Shipping Name
Not Regulated
Hazard Class
None assigned
DOT Identification Number
NONE
15. Regulatory Information
No Data Available...
NFPA HMIS
HEALTH 1
0
FLAMMABILITY 0
1 0
REACTIVITY 0
B
PERSONAL PROTECTION
16. Other Information
Revision/Preparer Information
MSDS Preparer: JHW
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no warranties
and make no representations as to the accuracy or completeness of the information contained therein,
and assume no responsibility regarding the suitablility of this information for the user's intended purposes
or for the consequences of its use. Each individual should make a determination as to the suitability of
the information for their particular purposes(s).
Applied Biochemists (WI)
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|