Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

64742-47-8
8052-41-3

File Name: whitakeroil_com---274795.asp
                                                      Mineral Spirits 66/3
Material Safety Data Sheet
CITGO Petroleum Corporation
MSDS No. 19024
1701 Golf Road, Suite 1-1101
Hazard Rankings
Rolling Meadows, IL 60008-4295
Revision Date 1/11/2001
HMIS NFPA
IMPORTANT: Read this MSDS before handling or disposing of this product and pass this information on to Health Hazard 1 0
employees, customers and users of this product.
Fire Hazard 2 2
Emergency Overview Reactivity 0 0
Physical State Liquid.
* = Chronic Health Hazard
Color Odor
Transparent, colorless. Light paraffinic hydrocarbon.
WARNING! Combustible liquid; vapor may cause flash fire! Protective Equipment
Mist or vapor may irritate the eyes, mucous membranes, and
Minimum Requirements
respiratory tract!
See Section 8 for Details
Liquid contact may cause minimal to moderate eye and/or
moderate to severe skin irritation and inflammation!
May be harmful if inhaled or absorbed through the skin!
Overexposures may cause central nervous system (CNS)
depression and/or other target organ effects!
May be harmful or fatal if ingested!
Aspiration into the lungs can cause pulmonary edema and
chemical pneumonia!
Spills may create a slipping hazard!

SECTION 1: IDENTIFICATION
Trade Name Mineral Spirits 66/3 Technical Contact (800) 967-7601
(8am - 4pm CT M-F)
Product Number (918) 495-4700
2024 Medical Emergency
CAS Number CHEMTREC Emergency
64742-47-8 or 8052-41-3 (800) 424-9300
(United States Only)

Product Family Petroleum Hydrocarbon Solvent
Synonyms Stoddard Solvent; Type 1 Hydrocarbon Drycleaning Solvent (meets ASTM D-484 Type 1 specifications);
Type IC Mineral Spirits (meets ASTM D-235 Type 1C specifications); D40 Naphtha;
White Spirits (meets Dry Cleaning Fluid Specification PD680 - Type I; C9-C12 Petroleum Hydrocarbons.


SECTION 2: COMPOSITION
Concentration (%)
Component Name(s) CAS Registry No.
1) Stoddard Solvent 8052-41-3 100
2) Light Hydrotreated Distillate (Petroleum) 64742-47-8 100
3) Nonanes Mixture 20-35
4) C10 Alkanes, Isoparaffins, and Cycloalkanes Mixture 40-60
5) C11 Alkanes, Isoparaffins, and Cycloalkanes Mixture 15-25
6) C12 Alkanes, Isoparaffins, and Cycloalkanes Mixture 1-15




MSDS No. Revision Date
19024 Page Number: 1
1/11/2001 Continued on Next Page
Mineral Spirits 66/3



SECTION 3: HAZARDS IDENTIFICATION
Also see Emergency Overview and Hazard Ratings on the top of Page 1 of this MSDS.

Major Route(s) of Entry Skin Contact. Eye Contact. Absorption. Inhalation.
Signs and Symptoms of Acute Exposure

Inhalation Breathing high concentrations of vapor may cause respiratory irritation, euphoria, excitation or giddiness,
headache, nausea, vomiting, abdominal pain, loss of appetite, fatigue, muscular weakness, staggering
gait, and central nervous system (CNS) depression. CNS effects include dizziness, drowsiness,
disorientation, vertigo, memory loss, visual disturbances, difficulty with breathing, convulsions,
unconsciousness, paralysis, coma, and even death, depending upon the level of exposure concentration
and/or duration. Vapors can reduce the oxygen content in air. Approximately 20,000 ppm (or 2 vol.%) in
air is fatal to humans in 5 to 10 minutes. Sudden death from cardiac arrest (heart attack) may result from
exposure to 5,000 ppm for only 5 minutes. Oxygen deprivation is possible if working in confined spaces.
Eye Contact Animal test results on similar materials suggest that this product can cause minimal to moderate eye
irritation upon short-term exposure. Symptoms include stinging, watering, redness, and swelling.
Skin Contact Animal test results on similar materials suggest that this product can cause moderate skin irritation.
Short-term contact symptoms include redness, itching, and burning of the skin. This material may also be
absorbed through the skin and produce CNS depression effects (see "Inhalation" above). If the skin is
damaged, absorption increases. Prolonged and/or repeated contact may cause moderate to severe
dermatitis. Chronic symptoms may include drying, swelling, scaling, blistering, cracking, and severe tissue
damage.
Ingestion If swallowed, this material may irritate the mucous membranes of the mouth, throat, and esophagus. It can
be readily absorbed by the stomach and intestinal tract. Symptoms include a burning sensation of the
mouth and esophagus, nausea, vomiting, dizziness, staggering gait, drowsiness, loss of consciousness,
and delirium, as well as additional central nervous system (CNS) effects (see "Inhalation" above).

Due to its light viscosity, there is a danger of aspiration into the lungs during vomiting. Aspiration can
result in severe lung damage or death. Progressive CNS depression, respiratory insufficiency, and
ventricular fibrillation may also result in death.
Chronic Health Effects Chronic effects of ingestion and subsequent aspiration into the lungs may cause pneumatocele (lung
Summary cavity) formation and chronic lung dysfunction.

Reports have associated repeated and proplonged occupational overexposure to solvents with irreversible
brain and nervous system damage (sometimes referred to as "Solvent or Painter's Syndrome"). Intentional
misuse by deliberately concentrating and inhaling this product may be harmful or fatal.
Conditions Aggravated Personnel with pre-existing central nervous system (CNS) disease, neurological conditions, skin disorders,
by Exposure chronic respiratory diseases, or impaired liver or kidney function should avoid exposure.

Target Organs This substance is toxic to lungs, central nervous system, brain, mucous membranes, skin, eyes, and
possibly, the blood, liver, or kidneys.
Carcinogenic Potential This product does not contain any components at concentrations above 0.1% which are considered
carcinogenic by OSHA, IARC, or NTP.
OSHA Hazard Classification is indicated by an "X" in the box adjacent to the hazard title. If no "X" is present, the product does not exhibit the
hazard as defined in the OSHA Hazard Communication Standard (29 CFR 1910.1200).

OSHA Health Hazard Classification OSHA Physical Hazard Classification

X Explosive Pyrophoric
Irritant Toxic Combustible
X

Oxidizer Water-reactive
Sensitizer Highly Toxic Flammable

Carcinogenic Organic Peroxide Unstable
Corrosive Compressed Gas




MSDS No. Revision Date
19024 Page Number: 2
1/11/2001 Continued on Next Page
Mineral Spirits 66/3



SECTION 4: FIRST AID MEASURES
Take proper precautions to ensure your own health and safety before attempting rescue or providing first aid. For more specific
information, refer to Exposure Controls and Personal Protection in Section 8 of this MSDS.
Inhalation Immediately move victim to fresh air. If victim is not breathing, immediately begin rescue breathing. If
heart has stopped, immediately begin cardiopulmonary resuscitation (CPR). If breathing is difficult, 100
percent humidified oxygen should be administered by a qualified individual. Seek medical attention
immediately.
Eye Contact Check for and remove contact lenses. If irritation or redness develops, flush eyes with cool, clean,
low-pressure water for at least 15 minutes. Hold eyelids apart to ensure complete irrigation of the eye
and eyelid tissue. Do not use eye ointment. Seek medical attention immediately.
Skin Contact Remove contaminated shoes and clothing. Flush affected area with large amounts of water. If skin
surface is damaged, apply a clean dressing and seek medical attention. Do not use ointments. If skin
surface is not damaged, clean affected area thoroughly with mild soap and water. Seek medical
attention if tissue appears damaged or if pain or irritation persists.
Ingestion Do not induce vomiting or give anything by mouth. If spontaneous vomiting is about to occur, place
victim鈥檚 head below knees. If victim is drowsy or unconscious, place on the left side with head down.
Never give anything by mouth to a person who is not fully conscious. Do not leave victim unattended.
Seek medical attention immediately.
Notes to Physician Inhalation overexposure can produce toxic effects. Monitor for respiratory distress. If cough or
difficulty in breathing develops, evaluate for upper respiratory tract inflammation, bronchitis, and
pneumonitis. Vigorous anti-inflammatory/steroid treatment may be required at first evidence of upper
airway or pulmonary edema. Administer 100 percent humidified supplemental oxygen with assisted
ventilation, as required.

If ingested, this material presents a significant aspiration/chemical pneumonitis hazard. As a result,
induction of emesis is not recommended. Administer an aqueous slurry of activated charcoal followed
by a cathartic such as magnesium citrate or sorbitol. Also, treatment may involve careful gastric lavage
if performed soon after ingestion or in patients who are comatose or at risk of convulsing. Protect the
airway by cuffed endotracheal intubation or by placement of the body in a Trendelenburg and left lateral
decubitus position. Obtain chest X-ray and liver function tests. Monitor for cardiac function, respiratory
distress and arterial blood gases in severe exposure cases.


SECTION 5: FIRE FIGHTING MEASURES
NFPA Flammability OSHA/NFPA Class-II Combustible Liquid. Highly combustible!
Classification
Flash Point Method CLOSED CUP: 42掳 to 45掳C (107掳 to 113掳F). (Tagliabue (ASTM D-56))
Lower Flammable Limit Upper Flammable Limit
AP 0.6 % AP 6.0 %
Autoignition Temperature AP 230掳C (446掳F)
Hazardous Burning or excessive heating may produce smoke, carbon monoxide, carbon dioxide, and possibly
Combustion Products other harmful gases/vapors.
Special Properties Combustible Liquid! This material releases vapors at or approaching its flash point temperature. When
mixed with air in certain proportions and exposed to an ignition source, its vapor can cause a flash fire.
Use only with adequate ventilation. Vapors are heavier than air and may travel long distances along the
ground to an ignition source and flash back. May create vapor/air explosion hazard in confined spaces
such as sewers. If container is not properly cooled, it can rupture in the heat of a fire.
SMALL FIRE: Use dry chemicals, carbon dioxide (CO2), foam, water fog, or inert gas (nitrogen).
Extinguishing Media
LARGE FIRE: Use foam, water fog, or waterspray. Water fog and spray are effective in cooling
containers and adjacent structures but might cause frothing and/or may not achieve extinquishment. A
water jet may be used to cool the vessel's external walls to prevent pressure build-up, autoignition, or
explosion. NEVER use a water jet directly on the fire because it may spread the fire to a larger area.




MSDS No. Revision Date
19024 Page Number: 3
1/11/2001 Continued on Next Page
Mineral Spirits 66/3

Fire Fighting Protective Firefighters must use full bunker gear including NIOSH-approved positive pressure self-contained
Clothing breathing apparatus to protect against potential hazardous combustion or decomposition products and
oxygen deficiencies. Evacuate area and fight the fire from a maximum distance or use unmanned hose
holders or monitor nozzles. Cover pooling liquid with foam. Containers can build pressure if exposed to
radiant heat; cool adjacent containers with flooding quantities of water until well after the fire is out.
W ithdraw immediately from the area if there is a rising sound from venting safety devices or
discoloration of vessels, tanks, or pipelines. Be aware that burning liquid will float on water. Notify
appropriate authorities if liquid(s) enter sewers or waterways.


SECTION 6: ACCIDENTAL RELEASE MEASURES
Take proper precautions to ensure your own health and safety before attempting spill control or clean-up. For more specific
information, refer to the Emergency Overview on Page 1, Exposure Controls and Personal Protection in Section 8 and Disposal
Considerations in Section 13 of this MSDS.
Combustible Liquid! Release causes an immediate fire or explosion hazard. Evacuate all non-essential
personnel from immediate area and establish a "regulated zone" with site control and security. A
vapor-suppressing foam may be used to reduce vapors. Eliminate all ignition sources. All equipment
used when handling this material must be grounded. Stop the leak if it can done without risk. Do not
touch or walk through spilled material. Remove spillage immediately from hard, smooth walking areas.
Prevent its entry into waterways, sewers, basements, or confined areas. Absorb or cover with dry earth,
sand, or other non-combustible material and transfer to appropriate waste containers. Use clean,
non-sparking tools to collect absorbed material.

For large spills, secure the area and control access. Dike far ahead of a liquid spill to ensure complete
collection. Water mist or spray may be used to reduce or disperse vapors; but, it may not prevent
ignition in closed spaces. This material will float on water and its run-off may create an explosion or fire
hazard. Verify that responders are properly HAZWOPER-trained and wearing appropriate respiratory
equipment and fire-resistant protective clothing during cleanup operations. In an urban area, cleanup
spill as soon as possible; in natural environments, cleanup on advice from specialists. Pick up free
liquid for recycle and/or disposal if it can be accomplished safely with explosion-proof equipment.
Collect any excess material with absorbant pads, sand, or other inert non-combustible absorbent
materials. Place into appropriate waste containers for later disposal. Comply with all laws and
regulations.


SECTION 7: HANDLING AND STORAGE
Handling A spill or leak can cause an immediate fire/explosion hazard. Keep containers closed and do not
handle or store near heat, sparks, or any other potential ignition sources. Bond and ground all
equipment before transferring this material from one container to another. Do not contact with
oxidizable materials. Do not breathe vapor. Use only with adequate ventilation/personal protection.
Never siphon by mouth. Avoid contact with eyes, skin, and clothing. Prevent contact with food,
chewing, or smoking materials. Do not take internally.

When performing repairs and maintenance on contaminated equipment, keep unnecessary persons
away from the area. Eliminate all potential ignition sources. Drain and purge equipment, as necessary,
to remove material residues. Use gloves constructed of impervious materials and protective clothing if
direct contact is anticipated. Provide ventilation to maintain exposure potential below applicable
exposure limits. Promptly remove contaminated clothing. Wash exposed skin thoroughly with soap and
water after handling.

Empty containers may contain material residues which can ignite with explosive force. Misuse of empty
containers can be dangerous if used to store toxic, flammable, or reactive materials. Cutting or welding
of empty containers can cause fire, explosion, or release of toxic fumes from residues. Do not
pressurize or expose empty containers to open flame, sparks, or heat. Keep container closed and drum
bungs in place. All label warnings and precautions must be observed. Return empty drums to a
qualified reconditioner. Consult appropriate federal, state and local authorities before reusing,
reconditioning, reclaiming, recycling, or disposing of empty containers and/or waste residues of this
material.




MSDS No. Revision Date
19024 Page Number: 4
1/11/2001 Continued on Next Page
Mineral Spirits 66/3

Storage Store and transport in accordance with all applicable laws. Keep containers tightly closed and store in a
cool, dry, well-ventilated place, plainly labeled, and out of closed vehicles. Keep away from all ignition
sources! Ground all equipment containing this material. Containers should be able to withstand
pressures expected from warming and cooling in storage. This combustible liquid should be stored in a
separate safety cabinet or room. All electrical equipment in areas where this material is stored or handled
should be installed in accordance with applicable requirements of the N.F.P.A.'s National Electical Code
(NEC).


SECTION 8: EXPOSURE CONTROLS AND PERSONAL PROTECTION
Engineering Controls Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapor
and/or mists below the pertinent exposure limits (see below). All electrical equipment should comply with
the NFPA NEC Standards. Ensure that an emergency eye wash station and safety shower are near the
work-station location.
Personal Protective Personal protective equipment should be selected based upon the conditions under which this material is
Equipment used. A hazard assessment of the work area for PPE requirements should be conducted by a qualified
professional pursuant to OSHA regulations. The following pictograms represent the minimum
requirements for personal protective equipment. For certain operations, additional PPE may be required.




Eye Protection Safety glasses with side shields are recommended as a minimum protection. During transfer
operations or when there is a likelihood of misting, splashing, or spraying, chemical goggles and face
shield should be worn. Suitable eye wash water should be readily available.
Hand Protection Avoid skin contact and use gloves (disposable PVC, neoprene, nitrile, vinyl, or PVC/NBR). Before
eating, drinking, smoking, use of toilet facilities, or leaving work, wash hands with plenty of mild soap
and water. DO NOT use gasoline, kerosene, other solvents, or harsh abrasive skin cleaners.
Body Protection Avoid skin contact. It is recommended that fire-retardant garments (e.g. Nomex鈩?) be worn while
working with flammable and combustible liquids. If splashing or spraying is expected,
chemical-resistant protective clothing (Tyvek庐, nitrile, or neoprene) should be worn. This might include
long-sleeves, apron, slicker suit, boots, and additional facial protection. If general contact occurs,
IMMEDIATELY remove soaked clothing and take a shower. Contaminated leather goods should be
removed promptly and discarded.
Respiratory Protection For unknown vapor concentrations use a positive-pressure, pressure-demand, self-contained breathing
apparatus (SCBA). For known vapor concentrations above the occupational exposure guidelines (see
below), use a NIOSH-approved organic vapor respirator if adequate protection is provided. Protection
factors vary depending upon the type of respirator used. Respirator use should follow OSHA
requirements (29 CFR 1910.134) or equivalent standard (e.g. ANSI Z88.2).
General Comments Warning! Odor is an inadequate warning for hazardous conditions.

This product is sometimes used as a dry-cleaning solvent. Retained solvent present in absorbent
clothing (e.g., shoulder pads, leather belts or straps, etc.) which remains in contact with the skin for
prolonged periods has caused severe skin irritation including redness, swelling, burns, and severe
tissue damage. Care must be taken to ensure that garments are completely dry before being worn.
Occupational Exposure Guidelines

Substance Applicable Workplace Exposure Levels
1) Stoddard Solvent TWA: 100 (ppm) from ACGIH (TLV) [2000]
TWA: 500 (ppm) from OSHA (PEL) [1989]
2) Nonane, all isomers TWA: 200 (ppm) from ACGIH (TLV) [2000]
TWA: 200 (ppm) from OSHA (PEL) [1989]




MSDS No. Revision Date
19024 Page Number: 5
1/11/2001 Continued on Next Page
Mineral Spirits 66/3



SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Odor
Transparent, Light paraffinic hydrocarbon.
Color
Physical State Liquid.
colorless.
Vapor Density 4.8 (Air = 1)
Not applicable.
0.78 (Water = 1) pH
Specific Gravity
160掳 to 200掳C Melting/Freezing Point
Boiling Point/Range -65掳 to -25掳C
(320掳 to 392掳F) (ASTM D-2887) (-85掳 to -13掳F)
Vapor Pressure Viscosity (cSt @ 40掳C)
2.6 mm of Hg at 20掳C (68掳F ) LT 15
(ASTM D-5191) or
0.35 torr at 20掳C (68掳F) by
Isoteniscope (ASTM D-2879).
Solubility in Water Slightly soluble in cold water (LT Volatile Characteristics Volatile Organic Compounds (VOCs)
0.05%). Content = 100%; 777 gm/L.

Additional Properties Alkane, Isoparaffin, and Cycloalkane Hydrocarbons Content = GT 99 Wt.% (ASTM D-1319);
C9-C11 Aromatic Hydrocarbon Content = LT 1 Wt.% (ASTM D-1319);
Average Density at 60掳F = 6.476 lbs./gal. (ASTM D-2161);
Aniline Cloud Point Temperature = 155掳F (68掳C) (ASTM D-611);
Kauri-Butanol (KB) Value = 33 (ASTM D-1133);
Dry Point Temperature = 383掳F (195掳C) (ASTM D-86);
Evaporation Rate = 0.20 when n-Butyl acetate = 1.0;
Heat Value = 19,784 Btu.


SECTION 10: STABILITY AND REACTIVITY
Hazardous Polymerization Not expected to occur.
Chemical Stability Stable.

Conditions to Avoid Keep away from extreme heat, strong acids, and strong oxidizing conditions.

Materials Incompatibility Strong acids, alkalies, and oxidizers such as liquid chlorine, other halogens, hydrogen peroxide, and
oxygen.
Hazardous No substances are readily identified from composition; but, no degradation data is available.
Decomposition Products


SECTION 11: TOXICOLOGICAL INFORMATION
For other health-related information, refer to the Emergency Overview on Page 1 and the Hazards Identification in Section 3 of this
MSDS.
Toxicity Data Stoddard Solvent or Mineral Spirits:
ORAL (LD50): Acute: GT 34,600 mg/kg [Rat].
GAS (LC50): Acute: GT 21,400 mg/m3 for 4 hours [Rat].
DERMAL (LD50): Acute: 15,400 mg/kg [Rabbit].
n-Nonane:
GAS (LC50): Acute: 3,200 ppm for 4 hours [Rat].
INTRAVENOUS (LD50): Acute: 218 mg/kg [Mouse].

Stoddard Solvent or Mineral Spirits is a mild to moderate eye irritant and a skin and respiratory tract
irritant. Human volunteers exposed to an airborne concentration of 400 ppm experienced no ill effects.
Saturated vapors in air (or AP 8,200 mg/m3) are below the LC50 level in rats.

Based upon laboratory animal studies, repeated direct application of Stoddard Solvent to the skin can
produce defatting dermatitis, kidney damage, and changes in blood-forming capacity. Rats developed
kidney damage and elevated blood urea nitrogen levels when exposed to a concentration of 1.9 mg/L
for 65 days. The kidney damage in rats appeared to involve both the tubules and glomeruli, but only
occurred in males; so these effects may not be pertinent to humans. Male rats exposed to airborne
concentrations of 100, 150, and 1,500 ppm for 6 hours per day, 5 days per week for 90 days did not
develop any functional or histological signs of nuerotoxicity. Stoddard Solvent and Mineral Spirits were
not mutagenic in the Salmonella/microsome (Ames) assay, the in-vivo mouse bone marrow cell
chromosome abberations assay, and the in-vitro rat sister chromatid exchanges assay.

MSDS No. Revision Date
19024 Page Number: 6
1/11/2001 Continued on Next Page
Mineral Spirits 66/3

Rats inhaling n-nonane at an airborne concentration of 1,500 ppm for 7 days displayed mild tremors
and loss of coordination. Inhalation of 1,600 ppm for 6 hours per day for 90 days showed animal weight
loss or decreased weight gain and changes in the structure of their salivary glands. And, liver damage
and an altered response to drugs were seen in rats given n-nonane for 2 to 7 days.


SECTION 12: ECOLOGICAL INFORMATION
Ecotoxicity Ecological effects testing has not been conducted on this material. If spilled, this naphtha, its storage
tank water bottoms and sludge, and any contaminated soil or water may be hazardous to human,
animal, and aquatic life.

Using Rainbow Trout (Oncorhynchus mykiss), similar naphthas showed a 96-hour TLm (Median Toxic
Limit) from 10 ppm to 20 ppm in ambient saltwater. 24-hour TLms resulted in 2,990 ppm and 200 ppm
when using Bluegill Sunfish (Lepomis macrochirus) and juvenile American Shad (Squalius cephalus),
respectively. Based upon actual spill incident investigations, similar naphthas have been shown to
bioaccumulate in tissues of various fish from a 1 ppm to 10 ppm levels.

Environmental Fate This naphtha is potentially toxic to freshwater and saltwater ecosystems. It will normally float on water
with its lighter components evaporating rapidly. In stagnant or slow-flowing waterways, a naphtha
hydrocarbon layer can cover a large surface area. As a result, this covering layer might limit or
eliminate natural atmospheric oxygen transport into the water. With time, if not removed, oxygen
depletion in the waterway might be enough to cause a fish kill or create an anaerobic environment. This
coating action can also be harmful or fatal to plankton, algae, aquatic life, and water birds. Additionally,
potable water and boiler feed water systems should NEVER be allowed more than 5 ppm contamination
from this material.
For additional ecological information concerning components of this product, users should refer to the
Hazardous Substances Data Bank庐 and the Oil and Hazardous Materials/Technical Assistance Data
System (OHM/TADS) maintained by the U.S. National Library of Medicine. (See Section 2 for
components.)


SECTION 13: DISPOSAL CONSIDERATIONS
Hazard characteristic and regulatory waste stream classification can change with product use. Accordingly, it is the responsibility
of the user to determine the proper storage, transportation, treatment and/or disposal methodologies for spent materials and
residues at the time of disposition.
Maximize material recovery for reuse or recycling. If spilled material is introduced into a wastewater
treatment system, chemical and biological oxygen demand (COD and BOD) will likely increase. This
material is biodegradable if gradually exposed to microorganisms, preferably in an aerobic
environment. In sewage-seeded wastewater, at or below concentrations of 0.2 vol.% of this naphtha,
there is little or no effect on bio-oxidation and/or digestion. However, at 1 vol.%, it doubles the
required digestion period. Higher concentrations interfere with floc formation and sludge settling and
also plug filters or exchange beds. Vapor emissions from a bio-oxidation process contaminated by this
material might prove to be a potential health hazard.

Recovered non-usable material may be regulated by US EPA as a hazardous waste due to its
ignitibility (D001) characteristics. In addition, conditions of use may cause this material to become a
hazardous waste, as defined by Federal or State regulations. It is the responsibility of the user to
determine if the material is a RCRA "hazardous waste" at the time of disposal. Transportation,
treatment, storage, and disposal of waste material must be conducted in accordance with RCRA
regulations (see 40 CFR Parts 260 through 271). State and/or local regulations might be even more
restrictive. Contact the RCRA/Superfund Hotline at (800) 424-9346 or your regional US EPA office for
guidance concerning case specific disposal issues.


SECTION 14: TRANSPORT INFORMATION
DOT Status This material is regulated by the U.S. Department of Transportation (DOT).




MSDS No. Revision Date
19024 Page Number: 7
1/11/2001 Continued on Next Page
Mineral Spirits 66/3

Proper Shipping Name Petroleum distillates, n.o.s. (Nonanes)

This product has a flash point temperature of between 100掳 and 141掳F (38掳 to 60掳C). For bulk
shipments, it is classified as a DOT "Flammable Liquid". However, according to 49 CFR 173.120(b)(2)
and 173.150(f)(1), this product may be reclassified as a "Combustible Liquid" and exempted from
certain transportation-related requirements, such as labeling, when shipped in non-bulk
"limited-quantity" containers of less than 119 gallons capacity. According to 49 CFR 173.150(f)(2) and
(3), this provision does not apply to "limited-quantities" offered for or transported via vessel or aircraft or
products which are defined as DOT "Marine Pollutants". It is recommended that "Flammable Liquid"
products which are reclassified be so identified on the bill-of-lading as "Combustible liquid, n.o.s.
(Petroleum distillates) or (Nonanes) with identification number "NA1993".

Hazard Class Class 3: Flammable liquid. Packing Group(s) PG III
UN/NA ID UN1268
Reportable Quantity There are no Reportable Quantity (RQ) substance components in this product which require DOT
HAZMAT bill-of-lading display.
Emergency Response Guide 128
Placards No.
HAZMAT STCC No. 49 102 56

MARPOL III Status Not a DOT "Marine Pollutant"
per 49 CFR 171.8.




SECTION 15: REGULATORY INFORMATION
TSCA Inventory This product and/or its components are listed on the Toxic Substance Control Act (TSCA) inventory.
SARA 302/304 The Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III requires facilities subject
to Subparts 302 and 304 to submit emergency planning and notification information based on Threshold
Planning Quantities (TPQs) and Reportable Quantities (RQs) for "Extremely Hazardous Substances"
listed in 40 CFR 302.4 and 40 CFR 355. No components were identified.
SARA 311/312 The Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III requires facilities subject
to this subpart to submit aggregate information on chemicals by "Hazard Category" as defined in 40
CFR 370.2. This material would be classified under the following hazard categories:
Fire Hazard, Acute (Immediate) Health Hazard, and Chronic (Delayed) Health Hazard.
SARA 313 This product does not contain any components in concentrations at or above de minimis levels that are
listed as toxic chemicals in 40 CFR Part 372 pursuant to the requirements of Section 313 of SARA.
CERCLA The Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA)
requires notification of the National Response Center concerning release of quantities of "hazardous
substances" equal to or greater than the reportable quantities (RQ's) listed in 40 CFR 302.4. As defined
by CERCLA, the term "hazardous substance" does not include petroleum, including crude oil or any
fraction thereof which is not otherwise specifically designated in 40 CFR 302.4. There are no chemical
substances in this product subject to this statute.
CWA This material is classified as an oil under Section 311 of the Clean Water Act (CWA) and the Oil
Pollution Act of 1990 (OPA). Discharges or spills which produce a visible sheen on waters of the United
States, their adjoining shorelines, or into conduits leading to surface waters must be reported to the
EPA's National Response Center at (800) 424-8802.
California This product is not known to contain any chemical substances which are known to the State of
Proposition 65 California to cause cancer, birth defects, or other reproductive harm, and therefore, it is not subject to
requirements of California Health & Safety Code Section 25249.5.
New Jersey For New Jersey labeling refer to components listed in Section 2.
Right-to-Know Label




MSDS No. Revision Date
19024 Page Number: 8
1/11/2001 Continued on Next Page
Mineral Spirits 66/3

Additional Regulatory Under the Federal Hazardous Substances Act, related statutes, and Consumer Product Safety
Remarks Commission regulations, as defined by 16 CFR 1500.14(b)(3) and 1500.83(a)(13): This product
contains "Petroleum Distillates" which may require special labeling if distributed in a manner intended or
packaged in a from suitable for use in the household or by children. Precautionary label dialogue
should display the following: Contains Petroleum Distillates! May be harmful or fatal if swallowed!
Keep Out of Reach of Children!
Under Section 12(b) of TSCA: Because it might contain detectable amounts of 1,3,5-Trimethylbenzene
(Mesitylene) [CAS No. 108-67-8], this product might be subject to US EPA's one-time only per country
export notification requirements.




SECTION 16: OTHER INFORMATION
Refer to the top of Page 1 for the HMIS and NFPA Hazard Ratings for this product.
REVISION INFORMATION
Version Number 3.0
Revision Date 1/11/2001
Print Date Printed on 1/16/2001.
ABBREVIATIONS

AP = Approximately EQ = Equal > = Greater Than < = Less Than NA = Not Applicable ND = No Data NE = Not
Established
ACGIH = American Conference of Governmental Industrial Hygienists AIHA = American Industrial Hygiene Association
IARC = International Agency for Research on Cancer NTP = National Toxicology Program
NIOSH = National Institute of Occupational Safety and Health OSHA = Occupational Safety and Health Administration
NPCA = National Paint and Coating Manufacturers Association HMIS = Hazardous Materials Information System
NFPA = National Fire Protection Association EPA = Environmental Protection Agency
DISCLAIMER OF LIABILITY

THE INFORMATION IN THIS MSDS WAS OBTAINED FROM SOURCES WHICH WE BELIEVE ARE RELIABLE. HOWEVER, THE
INFORMATION IS PROVIDED WITHOUT ANY WARRANTY, EXPRESSED OR IMPLIED REGARDING ITS CORRECTNESS. SOME
INFORMATION PRESENTED AND CONCLUSIONS DRAWN HEREIN ARE FROM SOURCES OTHER THAN DIRECT TEST DATA ON THE
SUBSTANCE ITSELF. THIS MSDS WAS PREPARED AND IS TO BE USED ONLY FOR THIS PRODUCT. IF THE PRODUCT IS USED AS
A COMPONENT IN ANOTHER PRODUCT, THIS MSDS INFORMATION MAY NOT BE APPLICABLE. USERS SHOULD MAKE THEIR
OWN INVESTIGATIONS TO DETERMINE THE SUITABILITY OF THE INFORMATION OR PRODUCTS FOR THEIR PARTICULAR
PURPOSE.

THE CONDITIONS OR METHODS OF HANDLING, STORAGE, USE, AND DISPOSAL OF THE PRODUCT ARE BEYOND OUR CONTROL
AND MAY BE BEYOND OUR KNOWLEDGE. FOR THIS AND OTHER REASONS, WE DO NOT ASSUME RESPONSIBILITY AND
EXPRESSLY DISCLAIM LIABILITY FOR LOSS, DAMAGE OR EXPENSE ARISING OUT OF OR IN ANY WAY CONNECTED WITH
HANDLING, STORAGE, USE OR DISPOSAL OF THE PRODUCT.

***** END OF MSDS *****

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
wesclean_com---425165.asp 7732-18-5 111-77-3 78-51-3 360564-26-7
wesclean_com---425184.asp 64742-47-8 68476-85-7
wesclean_com---425209.asp N/A
wesclean_com---425219.asp 64-02-8 68919-41-5
wesclean_com---425223.asp 11084-85-8
wesclean_com---425230.asp 67-64-1 106-97-8 74-98-6
wesclean_com---425242.asp N/A
wesclean_com---425243.asp N/A
wesclean_com---425245.asp N/A
wesclean_com---425248.asp 9004-82-4
wesclean_com---425257.asp 111-90-0
wesclean_com---425285.asp 67-56-1 68551-16-6 123-86-4
wesclean_com---425323.asp N/A
wesclean_com---425357.asp 2007-06-0 34590-94-8
wesclean_com---425358.asp 2007-06-0 141-43-5 1310-73-2
wesclean_com---425375.asp N/A
wesclean_com---425379.asp 67-56-1
wesclean_com---425380.asp N/A
wesclean_com---425399.asp 7732-18-5 1119-40-0 627-93-0 25498-49-1 67-64-1 107-98-2 111-76-2 628-63-7 106-65-0
wesclean_com---425539.asp 64-02-8 84133-50-6 102-71-6 70750-17-3
whitakeroil_com---00021774000220003.asp 64-19-7
whitakeroil_com---0900a85b800e0442.asp N/A
whitakeroil_com---10W30_MSDS.asp N/A
whitakeroil_com---15W40_MSDS.asp N/A
whitakeroil_com---2-Ethylhexanol_e.asp 104-76-7
whitakeroil_com---2161.asp N/A
whitakeroil_com---273926.asp 64742-81-0
whitakeroil_com---274795.asp 64742-47-8 8052-41-3
whitakeroil_com---274808.asp 110-54-3 96-37-7
whitakeroil_com---48_Lacquer_Thinner.asp 108-88-3 67-64-1 78-93-3 111-76-2 67-63-0
whitakeroil_com---589212.asp 64741-89-5 64741-88-4
whitakeroil_com---601769.asp 64742-52-5 64742-53-6
whitakeroil_com---737182.asp N/A
whitakeroil_com---737185.asp N/A
whitakeroil_com---9027.asp N/A
whitakeroil_com---A-150.asp 64742-94-5
whitakeroil_com---A100.asp 64742-95-6
whitakeroil_com---ACETONE.asp N/A
whitakeroil_com---Acetone2.asp 67-64-1
whitakeroil_com---AEP.asp 140-31-8
whitakeroil_com---allyl_alcohol_msds.asp 107-18-6
whitakeroil_com---AluminiumSulfate_TECH.asp 10043-01-3
whitakeroil_com---AMINOETHYLETHANOLAMINE_IND_LIQ.asp 111-41-1
whitakeroil_com---AmmoniumChloride_TECH.asp N/A
whitakeroil_com---AW_32_MSDS.asp N/A
whitakeroil_com---AW_46_MSDS.asp N/A
whitakeroil_com---aw_68_MSDS.asp N/A
whitakeroil_com---Bleach_MSDS.asp 01-01-9 01-10-0 7681-52-9
whitakeroil_com---Bleach_TECH.asp N/A
whitakeroil_com---BoricAcid_TECH.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:todaystock.net