MATERIAL SAFETY 3M
DATA SHEET 3M Center
St. Paul, Minnesota
55144-1000
1-800-364-3577 or (651) 737-6501 (24 hours)
Copyright, 2000, Minnesota Mining and Manufacturing Company.
All rights reserved. Copying and/or downloading of this
information for the purpose of properly utilizing 3M products
is allowed provided that:
1) the information is copied in full with no changes unless
prior agreement is obtained from 3M, and
2) neither the copy nor the original is resold or otherwise
distributed with the intention of earning a profit thereon.
DIVISION: COMMERCIAL CARE DIVISION
TRADE NAME:
3M Brand STAINLESS STEEL CLEANER & POLISH
ID NUMBER/U.P.C.:
61-5000-0318-3 00-48011-08113-7 61-5000-0869-5 00-48011-08173-1
61-5000-6132-2 00-48011-14002-0 61-5001-0835-4 00-48011-17906-3
70-0708-4135-1 31-34375-35244-9 70-0709-7689-2 00-48011-26564-8
96-0000-0064-4 - - - FN-5100-3744-6 - - -
FS-9100-2648-3 - - - FS-9100-2649-1 - - -
FS-9100-2649-3 - - - FZ-0100-0672-9 - - -
FZ-0100-0673-7 - - -
ISSUED: April 10, 2000
SUPERSEDES: May 25, 1999
DOCUMENT: 10-2819-0
-----------------------------------------------------------------------------
1. INGREDIENT C.A.S. NO. PERCENT
-----------------------------------------------------------------------------
WATER................................... 7732-18-5 40 - 70
WHITE MINERAL OIL (PETROLEUM)........... 8042-47-5 15 - 40
ISOBUTANE............................... 75-28-5 7 - 13
SORBITAN OLEATE......................... 1338-43-8 1 - 5
ETHANOLAMINE............................ 141-43-5 0.1 - 1
IN CASE OF EMERGENCY: THE NUMBERS AT THE TOP OF THIS PAGE PROVIDE 24
HOUR RESPONSE FROM ANY PHONE FOR ALL EMERGENCIES WITH THIS PRODUCT.
-----------------------------------------------------------------------------
2. PHYSICAL DATA
-----------------------------------------------------------------------------
BOILING POINT:................. ca. 212 F
VAPOR PRESSURE:................ N/D
VAPOR DENSITY:................. N/D
EVAPORATION RATE:.............. N/D
SOLUBILITY IN WATER:........... N/D
SPECIFIC GRAVITY:.............. ca. 0.95 Water=1
PERCENT VOLATILE:.............. 75 - 80 %
pH:............................ ca. 10.4
VISCOSITY:..................... N/D
MELTING POINT:................. N/D
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: 3M Brand STAINLESS STEEL CLEANER & POLISH
April 10, 2000 PAGE 2
-----------------------------------------------------------------------------
2. PHYSICAL DATA (continued)
-----------------------------------------------------------------------------
APPEARANCE AND ODOR:
Aerosol, liquid, white cream color
-----------------------------------------------------------------------------
3. FIRE AND EXPLOSION HAZARD DATA
-----------------------------------------------------------------------------
FLASH POINT:................... N/A
(for liquid; propellant FP < 0 F)
FLAMMABLE LIMITS - LEL:........ N/D
FLAMMABLE LIMITS - UEL:........ N/D
AUTOIGNITION TEMPERATURE:...... N/D
EXTINGUISHING MEDIA:
Water spray, Carbon dioxide, Dry chemical, Foam
SPECIAL FIRE FIGHTING PROCEDURES:
Water may not effectively extinguish fire; however, it should be used
to keep fire-exposed containers and surfaces cool and prevent
explosive rupture.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Closed containers exposed to heat from fire may build pressure and
explode. Aerosol container contains gas under pressure.
(AEROSOL STORAGE level indicated below is based on NFPA 30B
definition)
NFPA HAZARD CODES: HEALTH: 0 FIRE: 1 REACTIVITY: 0 AEROSOL STORAGE: 1
UNUSUAL REACTION HAZARD: none
-----------------------------------------------------------------------------
4. REACTIVITY DATA
-----------------------------------------------------------------------------
STABILITY: Stable
INCOMPATIBILITY - MATERIALS/CONDITIONS TO AVOID:
Heat.
HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon Monoxide and Carbon Dioxide.
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: 3M Brand STAINLESS STEEL CLEANER & POLISH
April 10, 2000 PAGE 3
-----------------------------------------------------------------------------
5. ENVIRONMENTAL INFORMATION
-----------------------------------------------------------------------------
SPILL RESPONSE:
Refer to other sections of this MSDS for information regarding
physical and health hazards, respiratory protection, ventilation, and
personal protective equipment. Ventilate area. Extinguish all
ignition sources. Contain spill. Collect spilled material. Clean
up residue with water. Place leaking containers in a well-ventilated
area, preferrably in an exhaust hood, if available, or outdoors.
RECOMMENDED DISPOSAL:
Small quantities (less than 5 gal.(19 L)) may be discharged to a
wastewater treatment system. Incinerate in a permitted hazardous
waste incinerator in the presence of a combustible material. Do not
puncture or burn cans in a household incinerator. Facility must be
capable of handling aerosol cans. Dispose of empty cans in a
sanitary landfill.
Empty aerosol cans may be recycled where facilities exist.
ENVIRONMENTAL DATA:
Not determined.
REGULATORY INFORMATION:
Volatile Organic Compounds: ca. 106 gms/liter South Coast Air Quality Mgmt
Dist Method Rule 443.1, calculated.
VOC Less H2O & Exempt Solvents: N/D.
Since regulations vary, consult applicable regulations or authorities
before disposal. In the event of an uncontrolled release of this
material, the user should determine if the release qualifies as a
reportable quantity. U.S. EPA Hazardous Waste Number = D001
(Ignitable)
TSCA: all components used in the manufacture of this material are in
compliance with the US TSCA inventory.
EPCRA HAZARD CLASS:
FIRE HAZARD: No PRESSURE: Yes REACTIVITY: No ACUTE: Yes CHRONIC: No
-----------------------------------------------------------------------------
6. SUGGESTED FIRST AID
-----------------------------------------------------------------------------
EYE CONTACT:
Immediately flush eyes with large amounts of water. Get immediate
medical attention.
SKIN CONTACT:
Flush skin with large amounts of water. If irritation persists, get
medical attention.
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: 3M Brand STAINLESS STEEL CLEANER & POLISH
April 10, 2000 PAGE 4
-----------------------------------------------------------------------------
6. SUGGESTED FIRST AID (continued)
-----------------------------------------------------------------------------
INHALATION:
If signs/symptoms occur, remove person to fresh air. If
signs/symptoms continue, call a physician.
IF SWALLOWED:
No need for first aid is anticipated.
-----------------------------------------------------------------------------
7. PRECAUTIONARY INFORMATION
-----------------------------------------------------------------------------
EYE PROTECTION:
Avoid eye contact.
SKIN PROTECTION:
Avoid prolonged or repeated skin contact.
RECOMMENDED VENTILATION:
Not applicable.
RESPIRATORY PROTECTION:
Avoid prolonged breathing of spray or mists.
PREVENTION OF ACCIDENTAL INGESTION:
Do not ingest.
RECOMMENDED STORAGE:
Store at temperatures below 120 degrees F (49 degrees C). Keep out
of the reach of children.
FIRE AND EXPLOSION AVOIDANCE:
Aerosol container contains flammable gas under pressure. Do not
pierce or burn container, even after use.
HMIS HAZARD RATINGS: HEALTH: 0 FLAMMABILITY: 1 REACTIVITY: 0
PERSONAL PROTECTION: X (See precautions, section 7.)
EXPOSURE LIMITS
INGREDIENT VALUE UNIT TYPE AUTH SKIN*
-----------------------------------------------------------------------------
WATER................................ NONE NONE NONE NONE
WHITE MINERAL OIL (PETROLEUM)........ 5 MG/M3 TWA CMRG
WHITE MINERAL OIL (PETROLEUM)........ 10 MG/M3 STEL CMRG
ISOBUTANE............................ NONE NONE NONE NONE
SORBITAN OLEATE...................... NONE NONE NONE NONE
ETHANOLAMINE......................... 3 PPM TWA ACGIH
ETHANOLAMINE......................... 6 PPM STEL ACGIH
ETHANOLAMINE......................... 3 PPM TWA OSHA
ETHANOLAMINE......................... 6 PPM STEL OSHA
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: 3M Brand STAINLESS STEEL CLEANER & POLISH
April 10, 2000 PAGE 5
EXPOSURE LIMITS (continued)
INGREDIENT VALUE UNIT TYPE AUTH SKIN*
-----------------------------------------------------------------------------
ETHANOLAMINE......................... 6 MG/M3 TWA OSHA
* SKIN NOTATION: Listed substances indicated with 'Y' under SKIN refer to
the potential contribution to the overall exposure by the cutaneous route
including mucous membrane and eye, either by airborne or, more particularly,
by direct contact with the substance. Vehicles can alter skin absorption.
SOURCE OF EXPOSURE LIMIT DATA:
- ACGIH: American Conference of Governmental Industrial Hygienists
- CMRG: Chemical Manufacturer Recommended Exposure Guidelines
- OSHA: Occupational Safety and Health Administration
- NONE: None Established
-----------------------------------------------------------------------------
8. HEALTH HAZARD DATA
-----------------------------------------------------------------------------
EYE CONTACT:
Mild Eye Irritation: signs/symptoms can include redness, swelling,
pain, and tearing.
SKIN CONTACT:
Product is not expected to be irritating to the skin.
INHALATION:
No adverse health effects are expected from inhalation exposure.
IF SWALLOWED:
Ingestion is not a likely route of exposure to this product.
No adverse health effects are expected from swallowing.
OTHER HEALTH HAZARD INFORMATION:
3M Brand Stainless Steel Cleaner & Polish contains no components
listed as carcinogens by IARC, NTP or OSHA.
-----------------------------------------------------------------------------
SECTION CHANGE DATES
-----------------------------------------------------------------------------
HEADING SECTION CHANGED SINCE May 25, 1999 ISSUE
-----------------------------------------------------------------------------
Abbreviations: N/D - Not Determined N/A - Not Applicable CA - Approximately
MSDS: 3M Brand STAINLESS STEEL CLEANER & POLISH
April 10, 2000 PAGE 6
-----------------------------------------------------------------------------
The information in this Material Safety Data Sheet (MSDS) is believed to
be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. User is responsible for determining
whether the 3M product is fit for a particular purpose and suitable for
user's method of use or application. Given the variety of factors that
can affect the use and application of a 3M product, some of which are
uniquely within the user's knowledge and control, it is essential that
the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers.
Due to the remote possibility that electronic transfer may have resulted
in errors, omissions or alterations in this information, 3M makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
information in the MSDS available directly from 3M.
|