Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: arcorepoxy_com---arcthspec.asp
 
                                                                                         ARCOR铮? ARC.Spec.07.99.1







ARCOR铮?

ARCOR铮? International

a Division of AEC Corp.



                PROCEDURE FOR INSTALLATION

               OF THE ARCTHANE JOINT SYSTEM

            ON TUBESHEET/CHANNEL HEAD INTERFACE



1. De-water channel head and tubes. Blow down all tubes to remove residual water.



2. Grit-blast interface region i.e. 2 inches of the sheet; the crevice; and two inches onto the channel

   head. An SSPC-SP-5 white metal, 3-5 mil profile is recommended.



3. If there is an existing coating on the channel head, brush blast 1-1/2 to 3鈥? of the existing coating

   directly next to the 2鈥? strip that is prepared to bare metal.



4. Thoroughly clean the area by vacuum, brush and vacuum.



5. Install a 20 mil of ARCOR铮? S-30 Prime. Refer to the product Data/Application sheet. The S-30 Prime

   should completely cover the prepared region feathering into the brush blasted region of the existing

   coating. There should be no visible skips or 鈥渉olidays.鈥?



6. Allow the ARCOR铮? S-30 Prime to set up tack-free. Consult the Data/Application sheet for overcoat

   window and/or the S-30 Cure Schedule chart.



7. Install a 20 mil coat of ARCOR铮? S-30. Refer to the product Data/Application sheet. The S-30 should

   completely cover the S-30Prime and should feather into the existing coating insuring no ridge exists

   between coated areas and that unprepared surfaces are not coated. There should be no visible skips

   or 鈥渉olidays.鈥?



8. Allow the ARCOR铮? S-30 to set up tack-free. Consult the Data/Application sheet for overcoat window

   and/or the S-30 Cure Schedule chart.



9. Install a bead of ARCOR铮? ARCTHANE into the crevice filling the joint. Use a caulking gun or similar

   device to force material into the crevice. Insure that the bead bridges from the tubesheet to the

   channel completely with no skips or voids. Cutting a plastic applicator corner off in a half-moon shape

   creates a useful tool to smooth the ARCTHANE in the joint.



                                                                                            Squeegees are

                                               Cut out with

                                                                                            provided in product

                                               razor

                                                                                            packaging







10. Allow to fully cure before subjecting to a spark test or immersion service. Consult the ARCTHANE

    Data/Application sheet or the ARCTHANE Cure Schedule chart.



11. Force cure with addition of heat as needed. Allow the surface (and the ARCOR铮?) to cool down to 95

    degrees F or less before spark testing or immersion after a force cure.

                                                  -END-







            AEC Corp., PO Box 273, So. Dennis, MA 02660       Tel: 800-878-9593; Fax: 888-878-9593

                             Arcor@ArcorEpoxy.com               www.ArcorEpoxy.com
Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
allturf_ca---knockdown_msds_april_18_2006.asp N/A
allturf_ca---knockdown_spec_label.asp N/A
allturf_ca---leafshield_label_march_1_2005.asp N/A
allturf_ca---merit0.5g_label_e.asp N/A
allturf_ca---meritsolupak_eulabel_e.asp N/A
allturf_ca---milorganitegreensgrade_msds.asp N/A
allturf_ca---pariii_msds.asp 2008-39-1 13791-92-9 2300-66-5
allturf_ca---primer_604_l__label_03-05.asp N/A
allturf_ca---primo_maxx_26989_en_msds_june_1_2004.asp 2004-06-0 95266-40-3 97-99-4
allturf_ca---regreen_msds_may_22_2006.asp N/A
allturf_ca---regreen_speclbl.asp N/A
allturf_ca---reward_label.asp 06-02-2
allturf_ca---roots_turf_food_12-2-12_april_1_2002.asp 7783-28-0 57-13-6
allturf_ca---roots_turf_food_20-2-8_july_21_2003.asp 7782-63-0 7439-96-5 1314-13-2 1317-38-8
allturf_ca---roundupultra_msds.asp 70901-12-1
allturf_ca---runway_msds_may_22_2006.asp N/A
allturf_ca---runway_spec-label.asp N/A
allturf_ca---senator70wpwsp_label.asp N/A
allturf_ca---senator70wpwsp_msds.asp 23564-05-8
allturf_ca---seymour_paint_blue_20-653_jan_6_2006.asp 64742-89-8 74-98-6 1317-65-3 106-97-8 64742-47-8 13463-67-7
allturf_ca---seymour_paint_green_20-655_jan_6_2006.asp 64742-89-8 74-98-6 1317-65-3 106-97-8 64742-47-8 13463-67-7
allturf_ca---seymour_paint_red_20-671_jan_6_2006.asp 64742-89-8 74-98-6 1317-65-3 106-97-8 64742-47-8
allturf_ca---seymour_paint_traffic_white_20-642_jan_6_2006.asp 64742-89-8 74-98-6 13463-67-7 106-97-8 7727-43-7 1317-65-3 64742-47-8
allturf_ca---signal_green_ez_speclabel.asp N/A
allturf_ca---signal_green_solupak_may_22_2006.asp N/A
allturf_ca---signal_liquid_msds_may_22_2006.asp N/A
allturf_ca---signature_label.asp N/A
allturf_ca---soluplex_nov_29_2004.asp 7782-63-0 7783-20-2 6132-04-3 77-92-9
allturf_ca---spectrum_msds_may_22_2006.asp N/A
allturf_ca---straightline12-0-0_fe__mn_2_april_6_2007_1.asp 5949-29-1 7782-63-0 7785-87-7
allturf_ca---straightline_turf_lable.asp N/A
allturf_ca---subduemaxx_label.asp 06-04-0
allturf_ca---terminatorawb_aug_28_2003.asp 63333-35-7
allturf_ca---think_purity_label.asp N/A
allturf_ca---true_blue_ez_solupak_speclabel.asp N/A
allturf_ca---true_blue_solupak_msds_may_22_2006.asp 68391-01-5 68956-79-6
arcorepoxy_com---010.asp N/A
arcorepoxy_com---11_annual.asp N/A
arcorepoxy_com---2212_msds.asp 90-72-2
arcorepoxy_com---3060garnet__msds.asp 1302-62-1
arcorepoxy_com---acidimmersion.asp N/A
arcorepoxy_com---alkaline_immersion.asp N/A
arcorepoxy_com---arcor_qualitycontrol.asp N/A
arcorepoxy_com---arcretespec.asp N/A
arcorepoxy_com---arcrete_data.asp N/A
arcorepoxy_com---arcrete_msds.asp 100-51-6
arcorepoxy_com---arcthane.asp N/A
arcorepoxy_com---arcthane_msds.asp 4226-51-9 461-58-5
arcorepoxy_com---arcthspec.asp N/A
arcorepoxy_com---armywastecasing.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC