BASF Corporation
_____________________________________________________________________________
Material Safety Data Sheet
_____________________________________________________________________________
Page :1
Original Date: 11/22/1991
Revision Date: 04/22/2002
BASF CORPORATION
1609 BIDDLE AVENUE
WYANDOTTE, MI 48192
(734) 324-5244
EMERGENCY TELEPHONE: (800) 424-9300 CHEMTREC
(800) 832-HELP (BASF Hotline)
BOTH NUMBERS ARE AVAILABLE DAYS, NIGHTS, WEEKENDS, & HOLIDAYS.
SECTION 1 - PRODUCT INFORMATION
_____________________________________________________________________________
PLURACOL庐1044 POLYOL
Product ID: NPU 584342
Common Chemical Name:
POLYETHER POLYOL
Synonyms:
CONVENTIONAL POLYOL
Molecular Formula:
N/A
Chemical Family: Polyether polyol
Molecular Wt.: NOT ESTABLISHED
SECTION 2 - INGREDIENTS
____________________________________________________________________________
Chemical Name: CAS Amount
POLYOL 25322-69-4 100.0 %
PEL/TLV NOT ESTABLISHED
SECTION 3 - HAZARDS IDENTIFICATION
______________________________________________________________________
Emergency Overview
Color: Water White
Form/Appearance: Liquid
Odor: Polyol
WARNING STATEMENT:
CAUTION:
CONTACT WITH THE EYES AND SKIN MAY CAUSE IRRITATION. INHALATION MAY
RESULT IN IRRITATION.
Potential Health Effects
Primary Routes of Exposure:
Routes of entry for solids and liquids include eye and skin
contact, ingestion and inhalation. Routes of entry for gases
include inhalation and eye contact. Skin contact may be a route
of entry for liquified gases.
Acute Overexposure Effects:
Contact with the eyes and skin may result in irritation.
Inhalation may result in respiratory irritation. Ingestion may
PLURACOL庐1044 POLYOL
NPU 584342 Page :2
SECTION 3 - HAZARDS IDENTIFICATION (cont)
_______________________________________________________________________
result in gastric disturbances.
Chronic Overexposure Effects:
There are no known chronic effects associated with this material.
First Aid Procedures - Aggravated Medical Conditions:
No data is available which addresses medical conditions that are
generally recognized as being aggravated by exposure to this product.
Please refer to the effects of overexposure section for effects
(if any) observed in animals.
SECTION 4 - FIRST AID MEASURES
_______________________________________________________________________
First Aid Procedures - Skin:
Wash affected areas with soap and water. Remove and launder
contaminated clothing before reuse. Get immediate medical attention.
First Aid Procedures - Eyes:
Immediately rinse eyes with running water for 15 minutes. Get
immediate medical attention.
First Aid Procedures - Ingestion:
If swallowed, dilute with water and immediately induce vomiting.
Never give fluids or induce vomiting if the victim is unconscious or
having convulsions. Get immediate medical attention.
First Aid Procedures - Inhalation:
Move to fresh air. Aid in breathing, if necessary, and get
immediate medical attention.
First Aid Procedures - Notes to Physicians:
None known.
First Aid Procedures - Aggravated Medical Conditions:
No data is available which addresses medical conditions that are
generally recognized as being aggravated by exposure to this product.
Please refer to the effects of overexposure section for effects
(if any) observed in animals.
First Aid Procedures - Special Precautions:
None
SECTION 5 - FIRE FIGHTING MEASURES
_______________________________________________________________________
Typical Low/High Deg. Method
Flash Point: > 200 F PENSKY-MARTINS CLOSED-C
Autoignition: NOT AVAILABLE
Extinguishing Media:
Use water, dry extinguishing media, carbon dioxide (CO2) or foam.
Fire Fighting Procedures:
Firefighters should be equipped with self-contained breathing
apparatus and turn out gear.
Unusual Hazards:
There are no known unusual fire or explosion hazards.
Autoignition: Not determined.
Product will decompose before autoignition.
PLURACOL庐1044 POLYOL
NPU 584342 Page :3
SECTION 6 - ACCIDENTAL RELEASE MEASURES
_______________________________________________________________________
General:
Spills should be contained, solidified and placed in suitable
containers for disposal at a licensed facility.
SECTION 7 - STORAGE AND HANDLING
_______________________________________________________________________
General:
Store in a ventilated storage area between 70-80F. Avoid excessive
temperatures, low or high. Avoid moisture.
Other Storage and Handling Data:
No other specific storage requirements.
SECTION 8 - PERSONAL PROTECTION
_______________________________________________________________________
Clothing:
Gloves, coveralls, apron, boots as necessary to prevent skin contact.
Eyes:
Chemical goggles; also wear a face shield if splashing hazard exists.
Respiration:
Approved organic vapor mist respirator as necessary.
Ventilation:
Use local exhaust to control vapors/mists.
Explosion Proofing:
None required.
Other Personal Protection Data:
Avoid contact with skin as required by good normal hygiene practices.
SECTION 9 - PHYSICAL PROPERTIES
______________________________________________________________________
Color: Water White
Form/Appearance: Liquid
Odor: Polyol
Odor Intensity: Low
Typical Low/High U.O.M.
Specific Gravity: 1 @ 25 DEG C
Bulk Density: 8.42 LB/GAL
Viscosity: 1400 CENTIPOISE @ 60 DEG.
pH: NOT AVAILABLE
Typical Low/High Deg. @ Pressure
Boiling Pt: NOT AVAILABLE
Freezing Pt: NOT AVAILABLE
Decomp. Tmp: NOT AVAILABLE
Solubility in Water Description: Insoluble
Vapor Density (Air = 1): HIGH, NO DATA
pH: Neutral
Water, wt. % = 0.02
Not distillable.
Material does not freeze. Product decomposes before boiling.
PLURACOL庐1044 POLYOL
NPU 584342 Page : 4
SECTION 10 - STABILITY AND REACTIVITY
_______________________________________________________________________
Stability Data:
Stable
Incompatability:
Avoid moisture to protect product quality.
Conditions/Hazards to Avoid:
Exposure to moisture and temperature greater than 130 F.
Hazardous Decomposition/Polymerization:
Hazardous decomposition products: CO and CO2.
Corrosive Properties:
Not Corrosive.
Oxidizer Properties:
Not an oxidizer
Other Reactivity Data:
None known.
SECTION 11 - TOXICOLOGICAL INFORMATION
_______________________________________________________________________
No applicable data for this section.
SECTION 12 - ECOLOGICAL INFORMATION
_______________________________________________________________________
No applicable data for this section.
SECTION 13 - DISPOSAL CONSIDERATION
_______________________________________________________________________
Waste Disposal:
Incinerate in a licensed facility. Do not discharge into waterways
or sewer systems.
Container Disposal:
Steel drums must be emptied (as defined by RCRA, Section 261.7 or
state regulations that may be more stringent) and can be sent to a
licensed drum reconditioner for reuse, a scrap metal dealer or an
approved landfill. Drums destined for a scrap dealer or landfill
must be punctured or crushed to prevent reuse.
SECTION 14 - TRANSPORTATION INFORMATION
_______________________________________________________________________
DOT Proper Shipping Name:
N/A
DOT Technical Name:
N/A
DOT Primary Hazard Class:
N/A
DOT Secondary Hazard Class:
N/A
DOT Label Required:
N/A
DOT Placard Required:
N/A
DOT Poison Constituent:
N/A
BASF Commodity Codes: UN/NA Code: NONE E/R Guide:
Bill of Lading Description:
NOT REGULATED BY THE DEPARTMENT OF TRANSPORTATION
PLURACOL庐1044 POLYOL
NPU 584342 Page : 5
SECTION 15 - REGULATORY INFORMATION
_______________________________________________________________________
TSCA Inventory Status
Listed on Inventory: YES
RCRA Haz. Waste No .: N/A
CERCLA: NO Reportable Qty.: (If YES)
SARA TITLE III; SECTION 313: NOT LISTED
State Regulatory Information: (By Component) NJ/PA/MA RTK
CAS: 25322-69-4 YES
NAME: POLYOL
SECTION 16 - OTHER INFORMATION
_______________________________________________________________________
Hazard Ratings:
BASF currently uses the National Paint & Coating Association (NPCA)
rating system. The use of an asterisk (*) in the HMIS rating
indicates the potential for chronic health effects.
Health: Fire: Reactivity: Special:
HMIS 1 0 0 NA
This product is not hazardous according to the OSHA Hazard
Communication Standard.
"IMPORTANT: WHILE THE DESCRIPTIONS, DESIGNS, DATA AND INFORMATION
CONTAINED HEREIN ARE PRESENTED IN GOOD FAITH AND BELIEVED TO BE
ACCURATE, IT IS PROVIDED FOR YOUR GUIDANCE ONLY. BECAUSE MANY FACTORS
MAY AFFECT PROCESSING OR APPLICATION/USE, WE RECOMMEND THAT YOU MAKE
TESTS TO DETERMINE THE SUITABILITY OF A PRODUCT FOR YOUR PARTICULAR
PURPOSE PRIOR TO USE. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS,
DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA
OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL
PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,
INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF OUR
TERMS AND CONDITIONS OF SALE. FURTHER, YOU EXPRESSLY UNDERSTAND AND
AGREE THAT THE DESCRIPTIONS, DESIGNS, DATA, AND INFORMATION FURNISHED
BY BASF HEREUNDER ARE GIVEN GRATIS AND BASF ASSUMES NO OBLIGATION OR
LIABILITY FOR THE DESCRIPTION, DESIGNS, DATA AND INFORMATION GIVEN
OR RESULTS OBTAINED, ALL SUCH BEING GIVEN AND ACCEPTED AT YOUR RISK".
BASF CORPORATION WILL NOT MAKE ITS PRODUCTS AVAILABLE TO CUSTOMERS
FOR USE IN THE MANUFACTURE OF MEDICAL DEVICES WHICH ARE INTENDED FOR
PERMANENT IMPLANTATION IN THE HUMAN BODY OR IN PERMANENT CONTACT WITH
INTERNAL BODILY TISSUES OR FLUIDS. WE AT BASF TAKE PRIDE IN OUR
PRODUCTS, AND OUR TRADITION OF DEVELOPING INNOVATIVE APPLICATIONS IN
PARTNERSHIP WITH OUR CUSTOMERS. HOWEVER, THE POSSIBILITY OF BEING
REQUIRED TO RESPOND TO UNFOUNDED LITIGATION AND/OR CLAIMS ARISING
OUT OF CONCERNS RELATING TO SUCH USE PRESENTS AN UNACCEPTABLE RISK
TO THE COMPANY.
END OF DATA SHEET
|