Monday, January 28, 2008
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: LIQUID BOILER SEAL
MSDS No.: B232
I. Basic Information:
Manufacturer: RADIATOR SPECIALTY COMPANY
0
Address: 600 RADIATOR ROAD
City, ST Zip: INDIAN TRAIL, NC 28079
2 0
Emergency Contact: Rocky Mountain Poision Control Center
Emergency Telephone Number: 303-623-5716
Contact: Robert Geer
Information Telephone Number: 704-684-1811
2
0
Last Update: 06/09/2005 Expiration Date:
0
X Liquid Gas Solid
Chemical State:
B
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
1344-09-8 Sodium Silicate 40-60 N/D N/D
III. Hazardous Identification:
Hazard Category:
X Acute Chronic Fire Pressure Reactive
Hazardous Identification Information:
Caution: Harmful if swallowed. Eye and Skin irritant. .
IV. First Aid Measures:
Route(s) of Entry:
Absorption, Eye, Inhalation, and Ingestion.
Health Hazards (Acute and Chronic):
May be irritating to the respiratory tract, skin, eyes, and gastrointestinal tract. May cause permanent eye damage.
Signs and Symptoms:
Eye Contact: Eye irritant. Direct spray of vapors may be irritating or harmful to eyes.
Skin Contact: Skin irritant. Product may cause irritation due to defatting of skin.
Inhalation: High concentration of vapors may irritate nose and throat and cause headaches and nausea.
Ingestion: Can cause irritation, gastric disturbances, and nausea..
Medical Conditions Generally Aggravated by Exposure:
None known
Emergency and First Aid Procedures:
Monday, January 28, 2008
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: LIQUID BOILER SEAL
MSDS No.: B232
Eye Contact: Flush eyes with water for 15 minutes while lifting upper and lower eyelid and get prompt medical attention.
.
Skin Contact: Wash with soap and water. If irritation persists, get prompt medical attention.
Inhalation: Move to fresh air. If breathing becomes difficult, get prompt medical attention.
Ingestion: Do not induce vomiting. Call Poison Control Center, physician, or hospital emergency room immediately.
Other Health Warnings:
None known
V. Fire Fighting Measures:
Flash Point: N/A Lower Explosive Limit: N/A Upper Explosive Limit: N/A
F.P. Method:
Fire Extinguishing Media: Water Fog, Foam, Carbon Dioxide, Dry Chemical
Special Fire Fighting Procedures:
Wear self-contained positive pressure breathing apparatus and protective clothes.
Unusual Fire and Explosion:
None Known
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Use appropiate protective equipment. Contain spill and then absorb spill with inert material or rags and scoop into a chemical
waste container. Neutralize remaining traces of material and flush with water followed by liberal covering with sodium bicarbonate.
All clean-up material should be removed and placed in approved containers for disposal. Rinse water may be disposed of down a
sanitary sewer system if authorized by the local municipality.
VII. Handling and Storage:
Precautions to be Taken:
Use with adequate ventilation and proper protective equipment.
Other Precautions:
Keep container closed tightly when not in use. Store in a cool place away from acids and oxidizing agents.
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
See Section 2 for applicable exposure limits. If TLV is exceeded, wear NIOSH approved respirator.
Personal Protective Equipment:
For prolonged exposure to the material, wear safety glasses, gloves, and apron.
Monday, January 28, 2008
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: LIQUID BOILER SEAL
MSDS No.: B232
IX. Physical and Chemical Properties:
Boiling Point: 220 F Melting Point: N/A
Evaporation Rate (Butyl Acetate = 1): N/D Vapor Pressure (mm Hg.): N/D
Specific Gravity (H20 = 1): 1.24000 Vapor Density (AIR = 1): N/D
Solubility In Water: Soluble Appearance and Odor:
Red viscous liquid with mild odor
Other Information: pH: 11-12
X. Stability and Reactivity:
Stability:
Stable
Incompatibility (Materials to Avoid):
Acids and metals. Acids will cause gelling and evolution of heat. Prolonged contact with aluminum may produce flammable
hydrogen gas.
Decomposition/By Products:
Normal production of combustion: carbon dioxide, carbon monoxide, and smoke
Hazardous Polymerization:
Will not occur
XI. Toxicological Information:
No data available.
XII. Ecological Information:
No data available
XIII. Disposal Considerations:
DISPOSAL: This container may be recycled in a recycling centers when empty. Before offering for recycling, empty the can or
bottle by using the product according to the label. If recycling is not available, wrap the container and discard in the trash. Dispose
of unused product in accordance with all local, state government and federal laws and regulations
XIV. Transport Information:
DOT Shipping Name: Not DOT regulated.
DOT Hazard Class: None
XV. Regulatory Information:
See Section 2 for SARA Reportable Chemicals.
USA TSCA: All components of this material are listed on the US TSCA Inventory.
XVI. Other Information:
Monday, January 28, 2008
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: LIQUID BOILER SEAL
MSDS No.: B232
Contact lenses may cause further damage in case of splash into eye. KEEP AWAY FROM CHILDREN AND ANIMALS!
N/E: Not Established
N/D: Not Determined
N/A: Not Applicable
N/AV: Not Available
While Radiator Specialty Company believes this data is accurate as of the revision date, we make no warranty with respect to the
data and we expressly disclaim all liability for reliance thereon. The data is offered solely for information, investigation, and
verification. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or
disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.
|