Fire
HAZARD RATING
MATERIAL SAFETY DATA SHEET
0 Reactivity
4-EXTREME
2 1 (Prepared according to 29 CFR 1910. 1200)
3-HIGH
2-MODERATE Health COR
Date Prepared: 2-6-03
Special
1-SLIGHT
SECTION 1 - PRODUCT IDENTIFICATION
Emergency Telephone No.
Daley International
Company Name 1-800-535-5053
2515 W. 35th Street, Chicago, IL 60632-1001
Address Information Telephone No. 773-523-8320
Product Name / ID# Product Type Liquid Sanitizer X Proprietory Product
LTS (7480)
SECTION 2 - HAZARDOUS INGREDIENTS
Chemical Name/Common Name Cas No. Percent (optional) TLV (Source)
Sodium Hypochlorite 7681-52-9 < 10% NA
X Contains no substances
* Substances - subject to the reporting requirements of SARA 313 and 40 CFR Part 372.
SECTION 3 - PHYSICAL DATA
Boiling Point (掳F) 卤 0.005 pH
Specific Gravity (H2O=1.0)
approx. 219掳F 1.104 12.0 卤 0.5 0%
% VOC (ww)
Solubility In Water X Complete Insoluble Emulsifiable or (Dispersible) Slight (or Partial)
NE NE
Evaporation Rate (vs H2O) X
Faster Slower About the Same Vapor Pressure Vapor Density
Appearance and Odor Light yellow / green, thin liquid, chlorine odor.
SECTION 4 - FIRE AND EXPLOSION HAZARD DATA
Flammable Limits
Flash Point (T.C.C.) X None to boiling Upper NA Lower NA
Extinguishing Media As appropriate for surrounding fire.
Special Fire Fighting Procedures Firefighters should wear self-contained breathing apparatus and full protective clohting. Use water spray to cool nearby containers.
Unusual Fire Explosion Hazards Decomposition when heated may cause containers to rupture or explode. Vigorous reaction with organic materials or oxidizing agents may result in fire.
SECTION 5 - REACTIVE DATA
Decomposes wehen
Heavy metals, reducing agents, organics, ammonia, acids.
Stability heated. Incompatibility
Hazardous Decomposition Products Hypochlorus acid (HOCI), chlorine, hydrochloric acid. Sodium chloride, Sodium chlorate and oxygen, depending on pH temperature, and time.
SECTION 6 - HEALTH HAZARDS
Primary routes of
Threshold Limit Value Product
X None Established Not Applicable X Eyes X Skin X Oral X Inhalation
See Section 2 for Ingredients TLV Exposure
Signs Symptoms of Over-exposure (Acute) Contact with eyes may cause severe irritation or damage. Skin contact may irritate the skin causing redness and possibly
inflammation. Inhalation of fumes or mists cause respiratory tract irritation and irritation of mucous membranes. Ingestion is extremely corrosive to the mouth, throat, mucous
membranes stomach, and cause severe abdominal pain, nausea, vomiting, circulatory colapse confusion, coma, and even death if large quantity is swallowed.
Signs Symptoms of Over-exposure (Chronic) Prolonged or repeated exposure can lead to constant irritation of eyes and throat and may also cause dermatitis and sensitization.
Asthma or other pre-existing lung/respiratory illnesses
Medical Conditions Aggravated by Over-exposure
NTP IARC OSHA X None
Carcinogen/Suspected Carcinogen Ingredients:
SECTION 7 - FIRST AID PROCEDURES - (If any Condition persists - Consult a physician.)
Eyes Flush with water for 15 minutes, while holding eyelids open. Get immediate medical attention.
Skin Wash with water for 15 minutes. Remove any contaminated clothing and wash before reuse.
Drink water or milk. Do NOT induce vomiting or administer baking soda or acidic antidotes. Call a physician.
Ingestion
Inhalation Remove to fresh air if qualified. Give artificial respiration or oxygen as necessary and/or seek medical help.
SECTION 8 - SPECIAL PROTECTION INFORMATION
Respiratory Protection When fumes are present, use NIOSH approved respirator with chlorine canister.
Ventilation requirements X Local Exhaust X Mechanical As needed to minimize exposure to vapors or mists.
Safety goggles.
Protective Gloves Eye Protection
Rubber
Other Protective Clothing Rubber apron, sleeves, and boots, if splashing may occur or when handling large volume of material.
SECTION 9 - SPILL OR LEAK PROCEDURES
Do not allow to enter sewers or streams. Flush with water to dilute as much as possible.
Steps to be Taken if Released or Spilled
Avoid heat and contamination with acid materials. Do not use combustible materials such as sawdust to absorb small spills.
Reduce by adding reducing agents, such as bisulfites or ferrous salt solutions. Some heat will be produced. Keep on alkaline side and dilute with copious quantities of
Waste Disposal Methods water. Principal end product is salt water (NaC1). Check all government regulations.
SECTION 10 - STORAGE AND HANDLING INFORMATION
Precautions to be Taken in handling and Storage Store so as to inaccessible to children.. Store in vented, closed, clean, non -
corrosive containers in cool, dry location away from sunlight. Store at temperatures below 85掳F. Wash thoroughly after handling.
|