24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
MATERIAL SAFETY DATA SHEET
SECTION I - MATERIAL AND MANUFACTURER IDENTIFICATION
Manufacturer's Name: JEEN INTERNATIONAL CORPORATION
24 MADISON ROAD
FAIRFIELD, NJ 07004
Telephone # (973) 439-1401
Chemtrec Emergency Telephone Number: 800-424-9300
Chemtrec International Telephone Number: 703-527-3887 (Collect Calls Accepted)
PRODUCT: JEEMATE 2000 DPS FLAKE
SYNONYMS: PEG 2000 MONOSTEARATE FLAKE
CHEMICAL: POLYGLYCOL ESTER
CAS NUMBER: 9004-99-3
SARA HAZARD: NONE NOTED (SECTION 311/312)
TITLE III SECTION 313: NOT LISTED
SECTION II - HAZARDOUS INGREDIENTS
COMPOSITION: % PEL/TLV HAZARD
PEG 2000 MONOSTEARATE FLAKE 99+ NONE/NONE NONE NOTED
THIS PRODUCT MAY CONTAIN TRACE AMOUNTS OF ETHYLENE OXIDE (75-21-8), ACETALDEHYDE (75-07-0), AND 1,4-
DIOXANE (123-91-1), AND IS LISTED IN ACCORDANCE WITH THE REGULATIONS AS SPECIFIED IN CALIFORNIA
PROPOSITION 65. ETHYLENE OXIDE IS A POTENTIAL CANCER AND REPRODUCTIVE HAZARD. 1,4-DIOXANE IS A
POTENTIAL CANCER HAZARD.
SECTION III - HEALTH INFORMATION
INHALATION: UNKNOWN
INGESTION: LD50:>32 CC/KG (ALBINO RAT)
EYE CONTACT: THE PRODUCT WAS NOT CLASSIFIED AS A PRIMARY EYE IRRITANT.
SKIN CONTACT: THE PRODUCT WAS NOT A PRIMARY SKIN IRRITANT OR A CORROSIVE MATERIAL
(RABBITS). THE PRIMARY SKIN IRRITATION INDEX FOR THE PRODUCT WAS 0.08.
SECTION IV - OCCUPATIONAL EXPOSURE LIMITS
PEL: TWA: 1 PPM; EL (15 MIN): 5 PPM (ETHYLENE OXIDE)
TWA: 100 PPM; STEL: 150 PPM (ACETALDEHYDE)
TWA: 25 PPM (SKIN) (1,4-DIOXANE)
TLV: TWA: 1 PPM (ETHYLENE OXIDE)
TWA: 100 PPM (ACETALDEHYDE)
TWA: 25 PPM (1,4-DIOXANE)
SECTION V - EMERGENCY FIRST AID PROCEDURE
FOR OVEREXPOSURE BY SWALLOWING: CALL A PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY.
FOR OVEREXPOSURE BY SKIN CONTACT: WASH AFFECTED AREA.
FOR OVEREXPOSURE BY EYE CONTACT: IMMEDIATELY FLUSH EYES WITH PLENTY OF COOL WATER FOR
AT
LEAST 15 MINUTES. DO NOT LET VICTIM RUB EYES. GET MEDICAL
ATTENTION IMMEDIATELY.
FOR OVEREXPOSURE BY INHALATION: IMMEDIATELY REMOVE VICTIM TO FRESH AIR. IF VICTIM HAS STOPPED
BREATHING GIVE ARTIFICIAL RESPIRATION, PREFERABLY BY MOUTH-TO
MOUTH. GET MEDICAL ATTENTION IMMEDIATELY.
SECTION VI - PHYSICAL DATA
BOILING POINT: NOT DETERMINED
50oC
MELTING POINT:
VAPOR PRESSURE: NOT ESTABLISHED
1.07 @ 50oC
SPECIFIC GRAVITY:
VAPOR DENSITY (AIR=1): GREATER THAN 1
SOLUBILITY IN WATER: SOLUBLE
APPEARANCE AND COLOR: WHITE WAXY SOLID
Page No. 1 of 3- MSDS - JEEMATE 2000-DPS Flake
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
SECTION VII - FIRE AND EXPLOSION HAZARDS
515oF (268oC) C.O.C.
FLASH POINT & METHOD USED:
FLAMMABLE LIMITS IN AIR, % BY VOL. LOWER: NOT ESTABLISHED
FLAMMABLE LIMITS IN AIR, % BY VOL. UPPER: NOT ESTABLISHED
NFPA RATING: NO NFPA RATING
HMIS RATING: HEALTH (0) FIRE (1) REACTIVITY (0)
SPECIAL FIRE FIGHTING PROCEDURES AND PRECAUTIONS:
(INDIVIDUALS SHOULD PERFORM ONLY THOSE FIRE FIGHTING PROCEDURES WHICH THEY HAVE BEEN TRAINED) USE
WATER SPRAY, DRY CHEMICAL, FOAM OR CARBON DIOXIDE. USE WATER TO KEEP FIRE-EXPOSED CONTAINERS COOL.
IF A SPILL OR LEAK HAS NOT IGNITED, USE WATER SPRAY TO DISPERSE THE VAPORS. WATER SPRAY MAY BE USED TO
FLUSH SPILLS AWAY FROM THE FIRE AND DILUTE SPILLS TO NONFLAMMABLE MIXTURES.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
FIREFIGHTERS SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS IN THE POSITIVE-PRESSURE MODE WITH A
FULL FACEPIECE WHEN THERE IS A POSSIBILITY OF EXPOSURE TO SMOKE, FUMES OR HAZARDOUS DECOMPOSITION
PRODUCTS.
SECTION VIII- REACTIVITY
STABILITY: GENERALLY STABLE
HAZARDOUS POLYMERIZATION: NONE LIKELY
CONDITIONS & MATERIALS TO AVOID: KEEP AWAY FROM HEAT AND FLAMES. AVOID CONTACT WITH
OXIDIZING
MATERIALS.
HAZARDOUS DECOMPOSITION PRODUCTS: DECOMPOSITION MAY PRODUCE OXIDES OF CARBON.
SECTION IX - EMPLOYEE PROTECTION
CONTROL MEASURES: HANDLE IN THE PRESENCE OF ADEQUATE VENTILATION.
RESPIRATORY PROTECTION:
WHERE EXPOSURE IS LIKELY TO EXCEED ACCEPTABLE CRITERIA (SEE SECTIONS II AND IV), USE NIOSH/OSHA
APPROVED RESPIRATORY EQUIPMENT. RESPIRATORS SHOULD BE SELECTED BASED ON THE FORM AND
CONCENTRATION OF CONTAMINANT IN AIR AND IN ACCORDANCE WITH OSHA (29 CFR 1910.134).
PROTECTIVE CLOTHING:
WEAR GLOVES AND PROTECTIVE CLOTHING WHICH ARE IMPERVIOUS TO THE PRODUCT FOR THE DURATION OF
ANTICIPATED EXPOSURE IF THERE IS POTENTIAL FOR PROLONGED OR REPEATED SKIN CONTACT.
EYE PROTECTION:
WEAR SAFETY GLASSES MEETING THE SPECIFICATIONS OF ANSI STANDARD Z87.1 WHERE NO CONTACT WITH THE EYE
IS ANTICIPATED. CHEMICAL SAFETY GOGGLES MEETING THE SPECIFICATIONS OF ANSI STANDARD Z87.1 SHOULD BE
WORN WHENEVER THERE IS THE POSSIBILITY OF SPLASHING OR OTHER CONTACT WITH EYES.
SECTION X - ENVIRONMENTAL PROTECTION
ENVIRONMENTAL PRECAUTIONS:
AVOID UNCONTROLLED RELEASES OF THIS MATERIAL. WHERE SPILLS ARE POSSIBLE, A COMPREHENSIVE SPILL
RESPONSE PLAN SHOULD BE DEVELOPED AND IMPLEMENTED.
SPILL OR LEAK PRECAUTIONS:
WEAR APPROPRIATE RESPIRATORY PROTECTION AND PROTECTIVE CLOTHING AS DESCRIBED IN SECTION IX. CONTAIN
SPILL MATERIAL. TRANSFER TO SECURE CONTAINERS. WHERE NECESSARY, COLLECT USING ABSORBENT MEDIA. IN
THE EVENT OF AN UNCONTROLLED RELEASE OF THIS MATERIAL, THE USER SHOULD DETERMINE IF THE RELEASE IS
REPORTABLE UNDER APPLICABLE LAWS AND REGULATIONS.
WASTE DISPOSAL:
ALL RECOVERED MATERIAL SHOULD BE PACKAGED, LABELED, TRANSPORTED, AND DISPOSED OR RECLAIMED IN
CONFORMANCE WITH APPLICABLE LAWS AND REGULATIONS AND IN CONFORMANCE WITH GOOD ENGINEERING
PRACTICES. AVOID LANDFILLING OF LIQUIDS. RECLAIM WHERE POSSIBLE.
Page No. 2 of 3- MSDS - JEEMATE 2000-DPS Flake
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
SECTION XI - REGULATORY CONTROLS
DEPARTMENT OF TRANSPORTATION: DOT CLASSIFICATION: NOT REGULATED
DOT PROPER SHIPPING NAME: -
OTHER DOT INFORMATION: -
OTHER REGULATORY REQUIREMENTS: LISTED IN TSCA INVENTORY
SECTION XII - PRECAUTIONS: HANDLING, STORAGE AND USAGE
NO SPECIAL PRECAUTIONS NECESSARY. AVOID CONTAINER DAMAGE WHILE HANDLING AND STORING.
Page No.3 of 3- MSDS - JEEMATE 2000-DPS Flake
This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of JEEN International Corporation. The data on this sheet relates only to the specific
material designated herein. JEEN International assumes no legal responsibility for use or reliance upon these data.
|