Product # (s)_7544
MATERIAL SAFETY DATA SHEET
Section 1. Company Identification and Product Information
Product Name or Identity: m-Enterococcus Agar
Acumedia Manufacturers, Inc. 517/372-9200
Manufacturer鈥檚 Name: Emergency Phone No.:
740 East Shiawassee 517/372-0108
Fax No.:
Lansing, Michigan 48912 foodsafety@neogen.com
e-mail:
Date Prepared or Revised: April 2008 Chemtrec: (800) 424-9300
Outside US and Canada: (703) 527-3887
Section 2. Composition / Information on Hazardous Ingredients
This product is a mixture of the substances listed below with the addition of nonhazardous materials.
Hazardous Components CAS-No. % Hazard
Specific Chemical Identity: Symbol
Potassium Phosphate 7758-11-4 9.5% Xi (Irritant)
Sodium Azide 26628-22-8 0.95% Xn (Harmful)
Section 3. Health Hazard Identification
Health Hazards: Information pertaining to particular dangers for man and environment.
R 20 / 22, Harmful by inhalation and if swallowed.
(Acute and Chronic)
R 36 / 37 / 38, Irritating to eyes, respiratory system, and skin.
Section 4. First Aid Measures
General Information: Symptoms of poisoning may even occur after several hours; therefore provide
Emergency /
medical observations for at least 48 hours after the accident.
First Aid
Procedures: Ingestion: If swallowed, seek medical attention. Show physician product label or MSDS.
Inhalation: If inhaled, supply fresh air or oxygen. Seek medical attention if breathing becomes labored or
difficult.
Eye Contact: Rinse opened eye for at least 15 minutes under running water, lifting lower and upper
eyelids occasionally. Seek medical attention.
Skin Contact: Remove contaminated clothing. Immediately wash with plenty of soap and water for at
least 15 minutes. Wash clothing before reuse. Seek medical attention if irritation develops.
Section 5. Fire and Explosion Hazard Data
Flash Point (Method Used): N/A Flammable Limits: LEL 鈥? N/A
UEL 鈥? N/A
Extinguishing Media: Use CO2, ABC multipurpose dry chemical, or water spray. Fight larger fires with water spray or
alcohol resistant foam.
Protective Equipment: No special measures required.
Unusual Fire and Explosion Hazards: During heating or in case of fire, poisonous gases (Nitrogen oxides) may be
produced.
Page 1 of 4
Product # (s)_7544
Section 6. Accidental Release Measures
Personal Precautions: Wear suitable protective clothing. Remove contaminated clothing immediately. Avoid inhalation,
contact with eyes and skin. Prevent formation of dust. Prevent direct contact with skin, eyes, or clothing. Place
contaminated material in a chemical waste container.
Environmental Precautions: Prevent dispersion of material. Wipe up with damp sponge or mop.
Clean-up Methods: Avoid prolonged or repeated exposure. Absorb material, ventilate area, and wash spill site after
material has been cleaned up. Avoid inhalation, contact with eyes and skin. Prevent formation of dust.
Section 7. Handling and Storage
Handling: Protect against physical damage. Ensure good ventilation / exhaustion. Prevent formation of dust.
Storage: Requirements to be met by storerooms and receptacles: 2 - 30掳C
Do not store together with oxidizing agents and acidic materials as well as heavy-metal compounds. Store in cool, dry
conditions in well sealed containers.
Other Precautions: No special measures required.
Section 8. Exposure Controls / Personal Protection
Components with limit values that require monitoring:
Sodium Azide (26628-22-8)
REL: Short term value: C0.3 mg/m3 (HN3 vapor) TLV: Short-term value: C 0.29 mg/m3 (HN3 vapor)
OSHA鈥揚EL: N/A
Additional Information: Personal Protection listed below are general requirements for laboratory personnel. Follow the
usual precautionary measures for handling chemicals / powder. Avoid contact with eyes, skin, and clothing.
Personal Protective Equipment:
Keep away from food, beverages, and feed.
Wash hands before and after entering laboratory.
Immediately remove all soiled and contaminated clothing.
Avoid contact with eyes and skin.
Breathing Equipment: In case of brief exposure, use a chemical fume hood or a NIOSH/MSHA-approved respiratory.
Hand Protection: Use chemical resistant gloves.
Eye Protection: Wear safety glasses or goggles.
Body Protection: Wear lab coat or other protective work clothing.
Section 9. Physical and Chemical Properties
Appearance and Odor: Homogenous, free-flowing powder, and light beige.
Boiling Point: Not determined Density: Not determined
Flash Point: Not applicable Melting Point: Not determined
Auto Igniting: Product is not flammable. Solubility in Water: Insoluble
Danger of explosion: Forms very sensitive explosive pH: 7.2 卤 0.2 @ 25掳C
metallic compounds.
Solvent Content: Organic solvents 鈥? 0.0% Solids Content: 100.0%
Page 2 of 4
Product # (s)_7544
Section 10. Stability and Reactivity
Unstable
Stability:
Stable X Conditions to Avoid: Stable under normal storage conditions.
Incompatibility (Materials to Avoid): Incompatible with strong oxidizing agents, acidic material, or metals.
Hazardous Decomposition or Byproducts: Potassium oxides, Carbon dioxide, and Nitrogen oxides.
May Occur
Hazardous Polymerization:
Will Not Occur X Sodium azide is present in this product. Contact with acidic solutions
and metal compounds over time may form potentially explosive
metal azides. Should any of this material be introduced into a
sanitary sewer system, flush with copious amounts of water.
Section 11. Toxicological Information
LD/LC50 values that are relevant:
LD50: ORL-RAT, 27 mg/kg, Sodium Azide (26628-22-8)
Carcinogenicity Classification:
IARC (International Agency for Research on Cancer) - Not listed
NTP (National Toxicology Program) - Not listed
Carcinogenicity Classification:
IARC (International Agency for Research on Cancer) 鈥? Not Listed
NTP (National Toxicology Program) Not Listed
Eye: Produces irritation.
Inhalation: Irritant if inhaled, coughing possible.
Chronic: Target organs: Cardiovascular system, respiratory system, central nervous system, eyes, kidneys and skin.
Prolonged or repeated skin contact may cause dermatitis.
Additional toxicological information: This product has a TDLo of 118 mg/kg (Or-human) based upon Sodium Azide
content. Classified as Harmful, Irritant.
Section 12. Ecological Information
Ecotoxicity Tests:
Water Hazard Class 1. Slightly hazardous for water. The ecological effects have not been thoroughly investigated, but
currently none have been identified.
Section 13. Disposal Considerations
Waste Disposal Method: Dispose in accordance with all applicable federal (40 CFR 261.3), state, and local environmental
regulations. Smaller quantities can be disposed of with solid waste.
RCRA Hazardous Waste: No
Contact a licensed professional waste disposal service to dispose of this material if questions arise.
Container Information: Do not remove labels from containers until they have been cleaned.
Section 14. Transport Information
DOT Regulations:
Not Regulated
Land Transport ADR/RID (cross-border):
Not Regulated
Page 3 of 4
Product # (s)_7544
Maritime Transport IMDG:
Not Regulated
Marine Pollutant: No
Air Transport ICAO-TI and IATA-DGR:
Not Regulated
Section 15. Regulatory Information
EU Regulations, Hazard Symbol(s):
Potassium Phosphate: Xi (Irritant)
Sodium Azide: Xn (Harmful)
TLV (Threshold Limit Value established by ACGIH): Sodium Azide (26628-22-8): A4
Risk Phrases:
R 22, Harmful if swallowed.
R 36 / 37 / 38, Irritating to eyes, respiratory system, and skin.
Safety Phrases:
S 13, Keep away from food, drink, and animal feedstuff.
S 22, Do not breathe dust.
S 24 / 25 / 26, Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S 36, Wear suitable protective clothing.
S 46, If swallowed, seek medical advice immediately and show this container or label.
Section 16. Other Information
This document is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide.
Acumedia Manufacturers, Inc. shall not be held liable for any damage resulting from handling or from contact with the above
product. These suggestions should not be confused with state, municipal or insurance requirements, and constitute NO
WARRANTY.
Page 4 of 4
Rev 03, April 2008
|