Product # (s)_7708
MATERIAL SAFETY DATA SHEET
Section 1. Company Identification and Product Information
Product Name or Identity: Terrific Broth, Modified
Acumedia Manufacturers, Inc. 517/372-9200
Manufacturer鈥檚 Name: Emergency Phone No.:
740 East Shiawassee 517/372-0108
Fax No.:
Lansing, Michigan 48912 foodsafety@neogen.com
e-mail:
Date Prepared or Revised: November 2007
Section 2. Composition / Information on Hazardous Ingredients
Hazardous Components CAS-No. % EG-Number Hazard
Specific Chemical Identity: Symbol
Potassium Phosphate 7758-11-4 24.4% 231-834-5 Xi (Irritant)
Section 3. Health Hazard Identification
Inhalation? Yes Skin? Yes Ingestion? Yes
Route(s) of Entry:
IRRITANT. Irritating to eyes, skin, and respiratory system. May be harmful if absorbed through the
Health Hazards:
skin or ingested.
(Acute and Chronic)
IARC Monographs? No OSHA Regulated? No
Carcinogenicity:
Signs and Symptoms of Exposure: May cause irritation to the eyes, mucous membranes, and upper respiratory tract.
May be harmful if inhaled. Ingestion can cause dehydration and congestion in internal organs.
Medical Conditions Generally Aggravated by Exposure: Ingestion can cause a fall in blood pressure, abdominal pain,
nausea, and vomiting. The toxicity of phosphates is their ability to sequester calcium. Chronic exposure of phosphates may
sequester calcium and cause calcium phosphate deposits in the kidneys.
Section 4. First Aid Measures
General Information: Immediately remove contaminated clothing. Show physician product label.
Emergency /
First Aid
Ingestion: If swallowed, wash mouth out with water provided person is conscious. Seek medical attention
Procedures:
immediately.
Inhalation: If inhaled, supply fresh air or oxygen. Seek medical attention. If breathing is difficult, give
oxygen. In case of unconsciousness, place patient on side position for transportation.
Eye Contact: Rinse opened eye for at least 15 minutes under running water, lifting lower and upper
eyelids occasionally. Seek medical attention.
Skin Contact: Remove contaminated clothing immediately. Wash with plenty of soap and water for at
least 15 minutes. Seek medical attention. Wash clothing before reuse.
Section 5. Fire and Explosion Hazard Data
Flash Point (Method Used): Flammable Limits:
Closed Cup: N/A LEL: (Lower Explosive Limit): N/A UEL: (Upper Explosive Limit): N/A
Extinguishing Media: Use water spray, Carbon dioxide, dry chemical powder, or appropriate foam.
Special Fire Fighting Procedures: Wear self-contained breathing apparatus and protective clothing to prevent contact
with skin and eyes. Emits toxic fumes under fire conditions. Firefighters should wear protective equipment and self-
contained breathing apparatus.
Unusual Fire and Explosion Hazards: During heating or in case of fire, poisonous gases are produced. Fine dust
dispersed in air in sufficient concentrations, and in the presence of an ignition source, is a potential dust explosion hazard.
Page 1 of 3
Product # (s)_7708
Section 6. Accidental Release Measures
Personal Precautions: Shut off all sources of ignition, ventilate spill area. Consider need for evacuation. Wear suitable
protective clothing, gloves, and eye protection. Avoid inhalation and contact with skin and eyes. Wear self-containing
breathing apparatus, rubber boots, and heavy rubber gloves. Place contaminated material in a chemical waste container.
Environmental Precautions: Prevent dispersion of material. Do not allow to enter drains or water courses.
Clean-up Methods: Contact safety officer and ventilate area. Absorb spill with inert material, including dry-lime, sand, or
soda ash, then place into a chemical waste container using non-sparking tools. Wash spill site after material pickup is
complete.
Section 7. Handling and Storage
Handling: Ensure good ventilation / exhaustion and do not breathe vapor. Avoid contact with eyes, skin, and clothing.
Avoid prolonged or repeated exposure. Do not use if skin is cut or scratched.
Storage: Keep container tightly closed, protect from light, moist air, and steam. Store away from oxidizing agents. Keep
away from heat, sparks, and open flame. Storage area should be cool, dry, and away from incompatible materials.
Containers of this material may be hazardous when empty since they retain product residues.
Section 8. Exposure Controls / Personal Protection
ACGIH TLV: N/A
OES: N/A
Engineering Measures: Do not use compressed air by filling, discharging or handling the product. Proper ventilation,
safety shower, and eye bath required. Use adequate general or local exhaust ventilation to keep airborne concentrations
below the permissible exposure limits.
Respiratory Protection (Specify Type): With sufficient ventilation, breathing apparatus is not necessary. In the event of
possible spill / exposure use dusk mask to (US) N95 or type P1 (EN 143) dust masks.
Local Exhaust: 50 鈥? 100 CFM Special: Safety shower and eye bath.
Ventilation:
Protective Gloves: Compatible chemical-resistant Eye Protection: Safety glasses or chemical goggles to EN 166,
gloves. 167, and 168.
Other Protective Clothing or Equipment: Uniform, lab coat, or disposable lab wear.
Work / Hygienic Practices: Follow the usual precautionary measure for handling chemicals / powder. Keep away from
food and beverages. Immediately remove all soiled and contaminated clothing. Avoid contact with eyes, skin, and clothing.
Section 9. Physical and Chemical Properties
Specific Gravity: 2.3 g/cm3 (Potassium Phosphate)
Boiling Point: N/A
Vapor Pressure (mm Hg.): N/A Melting Point: > 465潞C (Potassium Phosphate)
Vapor Density (AIR = 1): N/A Solubility in Water: 150 g / 100 g cold water (Potassium Phosphate)
Appearance and Odor: Solid white, granules, odorless (Potassium Phosphate)
Section 10. Stability and Reactivity
Unstable
Stability:
Stable X Conditions to Avoid: Moisture, stable under normal storage conditions.
Incompatibility (Materials to Avoid): Strong oxidizing agents and strong bases.
Hazardous Decomposition or Byproducts: Potassium oxides, Carbon monoxide, Carbon dioxide, Nitrogen oxides, and
strong oxidizing agents. Thermal decomposition may produce toxic fumes of phosphorus oxides and/or phosphine.
May Occur
Hazardous
Polymerization:
Will Not Occur X Conditions to Avoid: Moisture and incompatible materials.
Page 2 of 3
Product # (s)_7708
Section 11. Toxicological Information
LD50: SKN-RBT, > 4640 mg/kg (Potassium Phosphate)
Section 12. Ecological Information
Ecotoxicity Tests: N/A
Section 13. Disposal Considerations
Waste Disposal Method: Dispose in accordance with all applicable federal, state, and local environmental regulations. If
any questions arise, contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the
material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Container Information: Do not remove labels from containers.
Section 14. Transport Information
Potassium Phosphate:*
UN # --
Class: --
Packing Group: --
Hazard Class: --
IATA: Non-Hazardous for Air Transport
*Potassium Phosphate is considered to be non-hazardous for transport.
Section 15. Regulatory Information
EU Regulations
Hazard Symbol(s):
Potassium Phosphate: Xi (Irritant)
Risk Phrases:
Potassium Phosphate: R 36 / 37 / 38, Irritating to eyes, respiratory system, and skin.
Safety Phrases:
Potassium Phosphate: S 22 / 24 / 25, Do not breathe dust. Avoid contact with skin and eyes.
Section 16. Other Information
This document is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide.
Acumedia Manufacturer, Inc. shall not be held liable for any damage resulting from handling or from contact with the above
product. These suggestions should not be confused with state, municipal or insurance requirements, and constitute NO
WARRANTY.
Page 3 of 3
Rev 01, November 2007
|