Search   
MSDS 
:
 Optisorb Hisafe
CAS 
:
 0-00-0
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| Not available |Di-isopropylnaphthalene | 60-80 | unlisted |
|----------------|--------------------------------------|----------|-----------|
| Not available |3-Butoxy-2-propanol | 20-40.0 | unlisted |
|----------------|--------------------------------------|----------|-----------|
| Not available |1,4-Di-(methylstyryl)benzene | 0-0.1 | unlisted |
|----------------|--------------------------------------|----------|-----------|
| 92-71-7 |2,5-Diphenyloxazole | 0-1 | 202-181-3 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool. Combustible liquid. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray,
dry chemical, carbon dioxide, or chemical foam. Cool containers with
flooding quantities of water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Remove all sources of ignition. Absorb spill using an absorbent,
non-combustible material such as earth, sand, or vermiculite. Do not
use combustible materials such as sawdust.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Wash clothing before reuse. Keep
away from flames and other sources of high temperatures that may
cause material to form vapors. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 0-00-0:

CAS# 0-00-1:

CAS# 0-00-2:

CAS# 92-71-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 68 deg C ( 154.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: 0.94
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Nitrogen oxides.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-00-0 unlisted.
CAS# 0-00-1 unlisted.
CAS# 0-00-2 unlisted.
CAS# 92-71-7: RP6825000
LD50/LC50:
Not available.
Not available.
Not available.
Not available.
Carcinogenicity:
Di-isopropylnaphthalene -
Not listed by ACGIH, IARC, or NTP.
3-Butoxy-2-propanol -
Not listed by ACGIH, IARC, or NTP.
1,4-Di-(methylstyryl)benzene -
Not listed by ACGIH, IARC, or NTP.
2,5-Diphenyloxazole -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 0-00-0: No information available.
CAS# 0-00-1: No information available.
CAS# 0-00-2: No information available.
CAS# 92-71-7: No information available.
Canada
CAS# 92-71-7 is listed on Canada's DSL List.
CAS# 0-00-0 is not listed on Canada's Ingredient Disclosure List.
CAS# 0-00-1 is not listed on Canada's Ingredient Disclosure List.
CAS# 0-00-2 is not listed on Canada's Ingredient Disclosure List.
CAS# 92-71-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-00-0 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 0-00-1 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 0-00-2 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 92-71-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 3/09/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Buffer Solution, pH 10.0, Colour Coded, Solutrate
Ethyl Alcohol (90%) 64-17-5
Titanium (III) Chloride Solution (0.2M) 7705-07-9
Ethyl Alcohol (96%) 64-17-5
(R)-Glycidol 57044-25-4
Acetonitrile/Water Solutions 75-05-8
Sodium thiocyanate dihydrate 17032-40-5
Optisorb Hisafe 0-00-0
Methyladipoyl Chloride 35444-44-1
Phenol/Methanol Solvent 67-56-1
Silver sulfadiazine 22199-08-2
BUF-fi-SOL RCM 7558-80-7
Northwind 80756-85-0
(R,R)-(-)-2,5-Bis(Methoxymethyl)Pyrrolidine, 96% 90290-05-4
Glycerine-1-Methacrylate Acetone Ketal 7098-80-8
Hydrofluoric Acid 5% 7664-39-3
1-(3-Chlorophenyl)-Piperazine, 95%(HPLC) 6640-24-0
Estrone, 99+% 53-16-7
Tetraethylammonium Fluoride, Dihydrate 98% 665-46-3
Telluroxanthene, 99+% 261-42-7
3-endo-Hydroxymethylbicyclo[2.2.1]heptyl-2-endo-amine hydrochloride, 0-01-1
2,6-Dichlorobenzaldehyde, 99% 83-38-5
2-(Phenylthio)quinoline, 98% (gc) 22190-12-1
Xylene 1330-20-7
Mercury(I) nitrate dihydrate, p.a. 10415-75-5
Hexanes, HPLC grade, 98.5% 110-54-3
4,4'-Azobis(4-Cyanovaleric Acid) 2638-94-0
1-Amino-1-cyclohexanecarboxylic acid, hydrochloride, 98% 39692-17-6
Tetrahydrofuran, HPLC Grade 99.9% 109-99-9
Ethyl Acetate, HPLC grade, 99.9% 141-78-6
Methyl Sulfoxide-D6, 99.5+ Atom% D 2206-27-1
Acetic acid, potassium salt, anhydrous, 99+% 127-08-2
Ethyl levulinate, 98% 539-88-8
3-Methyl-1-Cyclohexene 591-48-0
4-Hydroxyindole, 99% 2380-94-1
Pyronin B, High Purity Biological Stain Dye Content 65% 2150-48-3
Formaldehyde solution (20%) 50-00-0
Cis-(1S,2S)-1,2 Dihydro-3-Fluorocatechol, 20w/v% in Ethylacetate 141-78-6
Cis 1,2-Cyclohexanedicarboxylic Acid 610-09-3
Cis-2-(Tert-Butoxycarbonylamino)-1-Cylclopentanecarboxylic Acid 0-00-0
Potassium Hexacyanoferrate (III) 13746-66-2
1-(2-Chloro-4-Fluorophenyl) Cyclohexanecarbonitrile 0-00-1
1-(2-Chloro-6-Fluorophenyl)Cyclohexanecarbonitrile 0-01-1
1-(2-Chloro-6-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0
Isobutyl chloroformate, 98% (gc) 543-27-1
1-(2-Chloro-4-Fluorophenyl)Cyclohexanecarboxylic Acid 0-01-1
2-Dimethylaminoethyl Chloride Hydrochloride, 99% 4584-46-7
1(2-Fluorophenyl)cyclohexanecarboxylic Acid 0-00-0
1-(3-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0
1-(4-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net