Search   
MSDS 
:
 Cis 1,2-Cyclohexanedicarboxylic Acid
CAS 
:
 610-09-3
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 610-09-3 |Cis 1,2-Cyclohexanedicarboxylic Acid | 99 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Use with adequate ventilation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Store in a cool, dry, well-ventilated area away from incompatible
substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 610-09-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: white
Odor: pungent
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 188-192 C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight: 172.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization:
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 610-09-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Cis 1,2-Cyclohexanedicarboxylic Acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 610-09-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 610-09-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 610-09-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/13/1998 Revision #6 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Buffer Solution, pH 10.0, Colour Coded, Solutrate
Ethyl Alcohol (90%) 64-17-5
Titanium (III) Chloride Solution (0.2M) 7705-07-9
Ethyl Alcohol (96%) 64-17-5
(R)-Glycidol 57044-25-4
Acetonitrile/Water Solutions 75-05-8
Sodium thiocyanate dihydrate 17032-40-5
Optisorb Hisafe 0-00-0
Methyladipoyl Chloride 35444-44-1
Phenol/Methanol Solvent 67-56-1
Silver sulfadiazine 22199-08-2
BUF-fi-SOL RCM 7558-80-7
Northwind 80756-85-0
(R,R)-(-)-2,5-Bis(Methoxymethyl)Pyrrolidine, 96% 90290-05-4
Glycerine-1-Methacrylate Acetone Ketal 7098-80-8
Hydrofluoric Acid 5% 7664-39-3
1-(3-Chlorophenyl)-Piperazine, 95%(HPLC) 6640-24-0
Estrone, 99+% 53-16-7
Tetraethylammonium Fluoride, Dihydrate 98% 665-46-3
Telluroxanthene, 99+% 261-42-7
3-endo-Hydroxymethylbicyclo[2.2.1]heptyl-2-endo-amine hydrochloride, 0-01-1
2,6-Dichlorobenzaldehyde, 99% 83-38-5
2-(Phenylthio)quinoline, 98% (gc) 22190-12-1
Xylene 1330-20-7
Mercury(I) nitrate dihydrate, p.a. 10415-75-5
Hexanes, HPLC grade, 98.5% 110-54-3
4,4'-Azobis(4-Cyanovaleric Acid) 2638-94-0
1-Amino-1-cyclohexanecarboxylic acid, hydrochloride, 98% 39692-17-6
Tetrahydrofuran, HPLC Grade 99.9% 109-99-9
Ethyl Acetate, HPLC grade, 99.9% 141-78-6
Methyl Sulfoxide-D6, 99.5+ Atom% D 2206-27-1
Acetic acid, potassium salt, anhydrous, 99+% 127-08-2
Ethyl levulinate, 98% 539-88-8
3-Methyl-1-Cyclohexene 591-48-0
4-Hydroxyindole, 99% 2380-94-1
Pyronin B, High Purity Biological Stain Dye Content 65% 2150-48-3
Formaldehyde solution (20%) 50-00-0
Cis-(1S,2S)-1,2 Dihydro-3-Fluorocatechol, 20w/v% in Ethylacetate 141-78-6
Cis 1,2-Cyclohexanedicarboxylic Acid 610-09-3
Cis-2-(Tert-Butoxycarbonylamino)-1-Cylclopentanecarboxylic Acid 0-00-0
Potassium Hexacyanoferrate (III) 13746-66-2
1-(2-Chloro-4-Fluorophenyl) Cyclohexanecarbonitrile 0-00-1
1-(2-Chloro-6-Fluorophenyl)Cyclohexanecarbonitrile 0-01-1
1-(2-Chloro-6-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0
Isobutyl chloroformate, 98% (gc) 543-27-1
1-(2-Chloro-4-Fluorophenyl)Cyclohexanecarboxylic Acid 0-01-1
2-Dimethylaminoethyl Chloride Hydrochloride, 99% 4584-46-7
1(2-Fluorophenyl)cyclohexanecarboxylic Acid 0-00-0
1-(3-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0
1-(4-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net