Search   
MSDS 
:
 Acetic acid, potassium salt, anhydrous, 99+%
CAS 
:
 127-08-2
SYNONYMS 
:
 Potassium acetate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 127-08-2 |Potassium acetate | >99 | 204-822-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Remove contaminated clothing and wash before reuse. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation. Use with adequate ventilation. Wash clothing before
reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 127-08-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: colorless to white
Odor: acetic odor
pH: 9.7 (0.1M solution)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 292 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: 1.80
Molecular Formula: C2H3KO2
Molecular Weight: 98.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. Decomposes when heated.
Conditions to Avoid:
Dust generation, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 127-08-2: AJ3325000
LD50/LC50:
CAS# 127-08-2: Oral, rat: LD50 = 3250 mg/kg.
Carcinogenicity:
Potassium acetate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 127-08-2: 1
Canada
CAS# 127-08-2 is listed on Canada's DSL List.
CAS# 127-08-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 127-08-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/07/1998 Revision #6 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Buffer Solution, pH 10.0, Colour Coded, Solutrate
Ethyl Alcohol (90%) 64-17-5
Titanium (III) Chloride Solution (0.2M) 7705-07-9
Ethyl Alcohol (96%) 64-17-5
(R)-Glycidol 57044-25-4
Acetonitrile/Water Solutions 75-05-8
Sodium thiocyanate dihydrate 17032-40-5
Optisorb Hisafe 0-00-0
Methyladipoyl Chloride 35444-44-1
Phenol/Methanol Solvent 67-56-1
Silver sulfadiazine 22199-08-2
BUF-fi-SOL RCM 7558-80-7
Northwind 80756-85-0
(R,R)-(-)-2,5-Bis(Methoxymethyl)Pyrrolidine, 96% 90290-05-4
Glycerine-1-Methacrylate Acetone Ketal 7098-80-8
Hydrofluoric Acid 5% 7664-39-3
1-(3-Chlorophenyl)-Piperazine, 95%(HPLC) 6640-24-0
Estrone, 99+% 53-16-7
Tetraethylammonium Fluoride, Dihydrate 98% 665-46-3
Telluroxanthene, 99+% 261-42-7
3-endo-Hydroxymethylbicyclo[2.2.1]heptyl-2-endo-amine hydrochloride, 0-01-1
2,6-Dichlorobenzaldehyde, 99% 83-38-5
2-(Phenylthio)quinoline, 98% (gc) 22190-12-1
Xylene 1330-20-7
Mercury(I) nitrate dihydrate, p.a. 10415-75-5
Hexanes, HPLC grade, 98.5% 110-54-3
4,4'-Azobis(4-Cyanovaleric Acid) 2638-94-0
1-Amino-1-cyclohexanecarboxylic acid, hydrochloride, 98% 39692-17-6
Tetrahydrofuran, HPLC Grade 99.9% 109-99-9
Ethyl Acetate, HPLC grade, 99.9% 141-78-6
Methyl Sulfoxide-D6, 99.5+ Atom% D 2206-27-1
Acetic acid, potassium salt, anhydrous, 99+% 127-08-2
Ethyl levulinate, 98% 539-88-8
3-Methyl-1-Cyclohexene 591-48-0
4-Hydroxyindole, 99% 2380-94-1
Pyronin B, High Purity Biological Stain Dye Content 65% 2150-48-3
Formaldehyde solution (20%) 50-00-0
Cis-(1S,2S)-1,2 Dihydro-3-Fluorocatechol, 20w/v% in Ethylacetate 141-78-6
Cis 1,2-Cyclohexanedicarboxylic Acid 610-09-3
Cis-2-(Tert-Butoxycarbonylamino)-1-Cylclopentanecarboxylic Acid 0-00-0
Potassium Hexacyanoferrate (III) 13746-66-2
1-(2-Chloro-4-Fluorophenyl) Cyclohexanecarbonitrile 0-00-1
1-(2-Chloro-6-Fluorophenyl)Cyclohexanecarbonitrile 0-01-1
1-(2-Chloro-6-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0
Isobutyl chloroformate, 98% (gc) 543-27-1
1-(2-Chloro-4-Fluorophenyl)Cyclohexanecarboxylic Acid 0-01-1
2-Dimethylaminoethyl Chloride Hydrochloride, 99% 4584-46-7
1(2-Fluorophenyl)cyclohexanecarboxylic Acid 0-00-0
1-(3-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0
1-(4-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net