Search   
MSDS 
:
 Titanium (III) Chloride Solution (0.2M)
CAS 
:
 7705-07-9
SYNONYMS 
:
 Titanium Trichloride; Titanium Trichloride Mixtures; Titanium     Trichloride Mixtures, Pyrohpric; Titanous Chloride;     Trichlorotitanium.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 7705-07-9 |Titanium trichloride | <4.0 | 231-728-9 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.Air sensitive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause circulatory system failure.
May cause perforation of the digestive tract. May cause systemic
effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed. Adverse reproductive effects have been
reported in animals.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Use extinguishing media
appropriate to the surrounding fire. Substance is noncombustible.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Place under an inert atmosphere.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Keep container tightly closed. Do not get on skin
or in eyes. Do not ingest or inhale. Use with adequate ventilation.
Handle under an inert atmosphere. Store protected from air. Discard
contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area. Do not expose to air. Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7705-07-9:

CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: purple
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Miscible with water
Specific Gravity/Density: Not available.
Molecular Formula: solution
Molecular Weight: 0

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, exposure to air, excess heat.
Incompatibilities with Other Materials:
Air, strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, irritating and toxic fumes and gases,
titanium/titanium oxides, hydrogen gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7705-07-9: XR1924000
CAS# 7732-18-5: ZC0110000
LD50/LC50:
Not available.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Titanium trichloride -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28 After contact with skin, wash immediately
with...
WGK (Water Danger/Protection)
CAS# 7705-07-9: No information available.
CAS# 7732-18-5: No information available.
Canada
CAS# 7705-07-9 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 7705-07-9 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7705-07-9 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 5/28/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Buffer Solution, pH 10.0, Colour Coded, Solutrate
Ethyl Alcohol (90%) 64-17-5
Titanium (III) Chloride Solution (0.2M) 7705-07-9
Ethyl Alcohol (96%) 64-17-5
(R)-Glycidol 57044-25-4
Acetonitrile/Water Solutions 75-05-8
Sodium thiocyanate dihydrate 17032-40-5
Optisorb Hisafe 0-00-0
Methyladipoyl Chloride 35444-44-1
Phenol/Methanol Solvent 67-56-1
Silver sulfadiazine 22199-08-2
BUF-fi-SOL RCM 7558-80-7
Northwind 80756-85-0
(R,R)-(-)-2,5-Bis(Methoxymethyl)Pyrrolidine, 96% 90290-05-4
Glycerine-1-Methacrylate Acetone Ketal 7098-80-8
Hydrofluoric Acid 5% 7664-39-3
1-(3-Chlorophenyl)-Piperazine, 95%(HPLC) 6640-24-0
Estrone, 99+% 53-16-7
Tetraethylammonium Fluoride, Dihydrate 98% 665-46-3
Telluroxanthene, 99+% 261-42-7
3-endo-Hydroxymethylbicyclo[2.2.1]heptyl-2-endo-amine hydrochloride, 0-01-1
2,6-Dichlorobenzaldehyde, 99% 83-38-5
2-(Phenylthio)quinoline, 98% (gc) 22190-12-1
Xylene 1330-20-7
Mercury(I) nitrate dihydrate, p.a. 10415-75-5
Hexanes, HPLC grade, 98.5% 110-54-3
4,4'-Azobis(4-Cyanovaleric Acid) 2638-94-0
1-Amino-1-cyclohexanecarboxylic acid, hydrochloride, 98% 39692-17-6
Tetrahydrofuran, HPLC Grade 99.9% 109-99-9
Ethyl Acetate, HPLC grade, 99.9% 141-78-6
Methyl Sulfoxide-D6, 99.5+ Atom% D 2206-27-1
Acetic acid, potassium salt, anhydrous, 99+% 127-08-2
Ethyl levulinate, 98% 539-88-8
3-Methyl-1-Cyclohexene 591-48-0
4-Hydroxyindole, 99% 2380-94-1
Pyronin B, High Purity Biological Stain Dye Content 65% 2150-48-3
Formaldehyde solution (20%) 50-00-0
Cis-(1S,2S)-1,2 Dihydro-3-Fluorocatechol, 20w/v% in Ethylacetate 141-78-6
Cis 1,2-Cyclohexanedicarboxylic Acid 610-09-3
Cis-2-(Tert-Butoxycarbonylamino)-1-Cylclopentanecarboxylic Acid 0-00-0
Potassium Hexacyanoferrate (III) 13746-66-2
1-(2-Chloro-4-Fluorophenyl) Cyclohexanecarbonitrile 0-00-1
1-(2-Chloro-6-Fluorophenyl)Cyclohexanecarbonitrile 0-01-1
1-(2-Chloro-6-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0
Isobutyl chloroformate, 98% (gc) 543-27-1
1-(2-Chloro-4-Fluorophenyl)Cyclohexanecarboxylic Acid 0-01-1
2-Dimethylaminoethyl Chloride Hydrochloride, 99% 4584-46-7
1(2-Fluorophenyl)cyclohexanecarboxylic Acid 0-00-0
1-(3-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0
1-(4-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net