Search   
MSDS 
:
 1-(3-Chlorophenyl)-Piperazine, 95%(HPLC)
CAS 
:
 6640-24-0
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6640-24-0 |1-(3-Chlorophenyl)piperazine | 95 | 229-654-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
Causes skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
May cause reproductive and fetal effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Vapors may be heavier than air. They can spread along the ground
and collect in low or confined areas.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 6640-24-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear light yellow to yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1930g/cm3
Molecular Formula: C10H13ClN2
Molecular Weight: 196.68

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Combustible with a wide range of hydrophilic and hydrophobic resins.,
strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6640-24-0: TB9659962
LD50/LC50:
Not available.
Carcinogenicity:
1-(3-Chlorophenyl)piperazine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 6640-24-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6640-24-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6640-24-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/06/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Buffer Solution, pH 10.0, Colour Coded, Solutrate
Ethyl Alcohol (90%) 64-17-5
Titanium (III) Chloride Solution (0.2M) 7705-07-9
Ethyl Alcohol (96%) 64-17-5
(R)-Glycidol 57044-25-4
Acetonitrile/Water Solutions 75-05-8
Sodium thiocyanate dihydrate 17032-40-5
Optisorb Hisafe 0-00-0
Methyladipoyl Chloride 35444-44-1
Phenol/Methanol Solvent 67-56-1
Silver sulfadiazine 22199-08-2
BUF-fi-SOL RCM 7558-80-7
Northwind 80756-85-0
(R,R)-(-)-2,5-Bis(Methoxymethyl)Pyrrolidine, 96% 90290-05-4
Glycerine-1-Methacrylate Acetone Ketal 7098-80-8
Hydrofluoric Acid 5% 7664-39-3
1-(3-Chlorophenyl)-Piperazine, 95%(HPLC) 6640-24-0
Estrone, 99+% 53-16-7
Tetraethylammonium Fluoride, Dihydrate 98% 665-46-3
Telluroxanthene, 99+% 261-42-7
3-endo-Hydroxymethylbicyclo[2.2.1]heptyl-2-endo-amine hydrochloride, 0-01-1
2,6-Dichlorobenzaldehyde, 99% 83-38-5
2-(Phenylthio)quinoline, 98% (gc) 22190-12-1
Xylene 1330-20-7
Mercury(I) nitrate dihydrate, p.a. 10415-75-5
Hexanes, HPLC grade, 98.5% 110-54-3
4,4'-Azobis(4-Cyanovaleric Acid) 2638-94-0
1-Amino-1-cyclohexanecarboxylic acid, hydrochloride, 98% 39692-17-6
Tetrahydrofuran, HPLC Grade 99.9% 109-99-9
Ethyl Acetate, HPLC grade, 99.9% 141-78-6
Methyl Sulfoxide-D6, 99.5+ Atom% D 2206-27-1
Acetic acid, potassium salt, anhydrous, 99+% 127-08-2
Ethyl levulinate, 98% 539-88-8
3-Methyl-1-Cyclohexene 591-48-0
4-Hydroxyindole, 99% 2380-94-1
Pyronin B, High Purity Biological Stain Dye Content 65% 2150-48-3
Formaldehyde solution (20%) 50-00-0
Cis-(1S,2S)-1,2 Dihydro-3-Fluorocatechol, 20w/v% in Ethylacetate 141-78-6
Cis 1,2-Cyclohexanedicarboxylic Acid 610-09-3
Cis-2-(Tert-Butoxycarbonylamino)-1-Cylclopentanecarboxylic Acid 0-00-0
Potassium Hexacyanoferrate (III) 13746-66-2
1-(2-Chloro-4-Fluorophenyl) Cyclohexanecarbonitrile 0-00-1
1-(2-Chloro-6-Fluorophenyl)Cyclohexanecarbonitrile 0-01-1
1-(2-Chloro-6-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0
Isobutyl chloroformate, 98% (gc) 543-27-1
1-(2-Chloro-4-Fluorophenyl)Cyclohexanecarboxylic Acid 0-01-1
2-Dimethylaminoethyl Chloride Hydrochloride, 99% 4584-46-7
1(2-Fluorophenyl)cyclohexanecarboxylic Acid 0-00-0
1-(3-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0
1-(4-Fluorophenyl)Cyclohexanecarboxylic Acid 0-00-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net