**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |Substituted Alkoxyaminophenylpiperizin| 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. Harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea.
Inhalation:
Causes respiratory tract irritation. Harmful if inhaled.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Avoid generating dusty conditions. Provide
ventilation. Vacuum or sweep up material and place into a suitable,
dry disposal container.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation. Use with adequate ventilation. Wash clothing before
reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 0-01-1:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Amines, strong oxidizing agents, strong bases, reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 0-01-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Substituted Alkoxyaminophenylpiperizinylbenzoic acid -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 22 Do not breathe dust.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 0-01-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-01-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-01-1 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/17/2005 Revision #1 Date: 5/17/2005
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Decanethiol, 98% (titr.)
| 143-10-2 |
|
2-Chloroaniline, 98+%
| |
|
3-Fluoro-4-methylbenzonitrile
| 170572-49-3 |
|
p-Anisic acid, 98%
| |
|
BS Buffer Solution pH 9.225
| 1303-96-4 |
|
2,4-Difluorobenzaldehyde
| 1550-35-2 |
|
9-Anthracenemethanol, 98%
| 1468-95-7 |
|
2,3,6-Trichlorophenylacetic acid
| 85-34-7 |
|
Phenylhydroquinone Diacetate
| 58244-28-3 |
|
Tris(acetoxyethyl)orthoformate
| 0-01-1 |
|
Diaminoethane tetra-acetic acid trisodium salt solutions (0.01M /
| 139-33-3 |
|
2-Chloro-P-Phenylenediamine Sulfate, 95%
| 61702-44-1 |
|
S-Triazolo(4,3-a)Quinoline
| 235-06-3 |
|
(3,4-Dichlorophenyl)-[(tetrahydro-pyran-2-yloxy)]-acetonitrile
| 0-01-1 |
|
1-Pentanesulfonic acid sodium salt premixed concentrate
| 67-56-1 |
|
1-(Benzofuran-2-yl)-4,4-5,5,5-pentafluoro-1,3-pentanedione
| 0-01-1 |
|
AZ12311148
| 0-01-1 |
|
Bis(N,N-diisopropylamino)methoxyphosphine
| 92611-10-4 |
|
(3,4-Dichloro-phenyl)-trimethylsilanyloxy-acetonitrile
| 95392-03-3 |
|
Ammonium-4-Chloro-7-Sulfobenzofurazan
| 81377-14-2 |
|
2-Bromoethyl-4-bromophenyl ether, 98%
| 18800-30-1 |
|
2-Bromovaleryl chloride
| 42768-45-6 |
|
2-Pyrid-3-yl-4,5-dihydro-1,3-thiazole-4-carboxylic acid
| 116247-03-1 |
|
2,3-Pyridinedicarboxylic acid, 99%
| 89-00-9 |
|
2'-Fluoroacetophenone, 97%
| |
|
Substituted Alkoxyaminophenylpiperizinylbenzoic acid
| 0-01-1 |
|
Chromic acid mix detergent
| 7664-93-9 |
|
Potassium chromate solution, 5% w/v
| 7732-18-5 |
|
Acetic acid based buffer
| 64-19-7 |
|
N,N'-Dioctadecyloxacarbocyanine p-toluenesulfonate, 99% (uv-vis)
| 60711-74-2 |
|
4-Methoxyindole
| 4837-90-5 |
|
4-Chlorophthalic acid, monosodium salt, tech.
| 56047-23-5 |
|
alpha-D-Glucose pentaacetate, 98%
| 604-68-2 |
|
1-Bromo-2-(2-methoxyethoxy)ethane, 98%
| 54149-17-6 |
|
3,5-Dinitrobenzoic acid, 99%
| 99-34-3 |
|
trans-2,trans-4-Hexadienal, 95%
| 142-83-6 |
|
N-(2-Hydroxyethyl)iminodiacetic acid, 98%
| 93-62-9 |
|
4-Bromobenzo-15-Crown-5, 96%
| 0-00-1 |
|
1-Nitronaphthalene, 99%
| 86-57-7 |
|
Boron Atomic Absorption Standard Solution 1 mg/ml B in Water
| 7440-42-8 |
|
4-Epitetracycline Hydrochloride,"Can be used as Secondary Standard."
| 23313-80-6 |
|
Dowex 50x8-200 Ion-Exchange Resin
| 11119-67-8 |
|
2,3-Dimethylmaleic Anhydride, 97%
| 766-39-2 |
|
D-Raffinose Pentahydrate
| 512-69-6 |
|
Pentaerythritol, 98%
| 115-77-5 |
|
Perfluorooctyl bromide, 99.5+%
| 423-55-2 |
|
Diethyl Iminodiacetate, 99% (GC)
| 6290-05-7 |
|
3-Methylene-2-Norbornanone, 97%
| 5597-27-3 |
|
2-(2-Thienyl)ethanol , 99%
| 5402-55-1 |
|
1,4-Dimethoxyantracene, 98% (uv-vis)
| 13076-29-4 |
|
|