**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 116247-03-1 |2-Pyrid-3-yl-4,5-dihydro-1,3-thiazole-| 97 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid breathing dust.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 116247-03-1:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
The absence of published exposure limits does not
mean that a substance poses no inhalation hazard. If
inhalation exposure is likely or if irritation or
other symptoms are experienced, wear a NIOSH/MSHA or
European Standard EN 149 approved respirator.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: 5.83E-9 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 407 deg C @ 760 mm Hg
Freezing/Melting Point: 185-188 deg C
Autoignition Temperature: Not available.
Flash Point: 227 deg C ( 440.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C9H8N2O2S
Molecular Weight: 208.23
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon
dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 116247-03-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Pyrid-3-yl-4,5-dihydro-1,3-thiazole-4-carboxylic acid -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 22 Do not breathe dust.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 116247-03-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 116247-03-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 116247-03-1 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/02/2005 Revision #1 Date: 5/02/2005
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Decanethiol, 98% (titr.)
| 143-10-2 |
|
2-Chloroaniline, 98+%
| |
|
3-Fluoro-4-methylbenzonitrile
| 170572-49-3 |
|
p-Anisic acid, 98%
| |
|
BS Buffer Solution pH 9.225
| 1303-96-4 |
|
2,4-Difluorobenzaldehyde
| 1550-35-2 |
|
9-Anthracenemethanol, 98%
| 1468-95-7 |
|
2,3,6-Trichlorophenylacetic acid
| 85-34-7 |
|
Phenylhydroquinone Diacetate
| 58244-28-3 |
|
Tris(acetoxyethyl)orthoformate
| 0-01-1 |
|
Diaminoethane tetra-acetic acid trisodium salt solutions (0.01M /
| 139-33-3 |
|
2-Chloro-P-Phenylenediamine Sulfate, 95%
| 61702-44-1 |
|
S-Triazolo(4,3-a)Quinoline
| 235-06-3 |
|
(3,4-Dichlorophenyl)-[(tetrahydro-pyran-2-yloxy)]-acetonitrile
| 0-01-1 |
|
1-Pentanesulfonic acid sodium salt premixed concentrate
| 67-56-1 |
|
1-(Benzofuran-2-yl)-4,4-5,5,5-pentafluoro-1,3-pentanedione
| 0-01-1 |
|
AZ12311148
| 0-01-1 |
|
Bis(N,N-diisopropylamino)methoxyphosphine
| 92611-10-4 |
|
(3,4-Dichloro-phenyl)-trimethylsilanyloxy-acetonitrile
| 95392-03-3 |
|
Ammonium-4-Chloro-7-Sulfobenzofurazan
| 81377-14-2 |
|
2-Bromoethyl-4-bromophenyl ether, 98%
| 18800-30-1 |
|
2-Bromovaleryl chloride
| 42768-45-6 |
|
2-Pyrid-3-yl-4,5-dihydro-1,3-thiazole-4-carboxylic acid
| 116247-03-1 |
|
2,3-Pyridinedicarboxylic acid, 99%
| 89-00-9 |
|
2'-Fluoroacetophenone, 97%
| |
|
Substituted Alkoxyaminophenylpiperizinylbenzoic acid
| 0-01-1 |
|
Chromic acid mix detergent
| 7664-93-9 |
|
Potassium chromate solution, 5% w/v
| 7732-18-5 |
|
Acetic acid based buffer
| 64-19-7 |
|
N,N'-Dioctadecyloxacarbocyanine p-toluenesulfonate, 99% (uv-vis)
| 60711-74-2 |
|
4-Methoxyindole
| 4837-90-5 |
|
4-Chlorophthalic acid, monosodium salt, tech.
| 56047-23-5 |
|
alpha-D-Glucose pentaacetate, 98%
| 604-68-2 |
|
1-Bromo-2-(2-methoxyethoxy)ethane, 98%
| 54149-17-6 |
|
3,5-Dinitrobenzoic acid, 99%
| 99-34-3 |
|
trans-2,trans-4-Hexadienal, 95%
| 142-83-6 |
|
N-(2-Hydroxyethyl)iminodiacetic acid, 98%
| 93-62-9 |
|
4-Bromobenzo-15-Crown-5, 96%
| 0-00-1 |
|
1-Nitronaphthalene, 99%
| 86-57-7 |
|
Boron Atomic Absorption Standard Solution 1 mg/ml B in Water
| 7440-42-8 |
|
4-Epitetracycline Hydrochloride,"Can be used as Secondary Standard."
| 23313-80-6 |
|
Dowex 50x8-200 Ion-Exchange Resin
| 11119-67-8 |
|
2,3-Dimethylmaleic Anhydride, 97%
| 766-39-2 |
|
D-Raffinose Pentahydrate
| 512-69-6 |
|
Pentaerythritol, 98%
| 115-77-5 |
|
Perfluorooctyl bromide, 99.5+%
| 423-55-2 |
|
Diethyl Iminodiacetate, 99% (GC)
| 6290-05-7 |
|
3-Methylene-2-Norbornanone, 97%
| 5597-27-3 |
|
2-(2-Thienyl)ethanol , 99%
| 5402-55-1 |
|
1,4-Dimethoxyantracene, 98% (uv-vis)
| 13076-29-4 |
|
|