**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 115-77-5 |Pentaerythritol, 98% | 98% | 204-104-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
None
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. This material in sufficient quantity and reduced
particle size is capable of creating a dust explosion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 115-77-5:
United Kingdom, WEL - TWA: 10 mg/m3 TWA (inhalable dust); 4 mg/m3
(respirable dust)
United Kingdom, WEL - STEL: 20 mg/m3 STEL (inhalable dust); 12 mg
STEL (respirable dust)
United States OSHA: 15 mg/m3 TWA (total dust); 5 mg/m3 TWA
(respirable fraction)
Belgium - TWA: 10 mg/m3 VLE
France - VME: 10 mg/m3 VME
Malaysia: 10 mg/m3 TWA
Netherlands: 10 mg/m3 MAC (inhalable dust); 5 mg/m3 MAC (respirab
dust)
Spain: 10 mg/m3 VLA-ED (inhalable fraction); 4 mg/m3 VLA-ED
(respirable fraction)
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective clothing to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white
Odor: Odorless.
pH: Not available.
Vapor Pressure: 1 mm Hg @20C
Viscosity: Not available.
Boiling Point: 276 deg C @ 30.00mm Hg
Freezing/Melting Point: 255 - 259 deg C
Autoignition Temperature: 490 deg C ( 914.00 deg F)
Flash Point: 240 deg C ( 464.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 1 G/18 ML WATER (15C)
Specific Gravity/Density:
Molecular Formula: C5H12O4
Molecular Weight: 136.15
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong acids - acid chlorides - acid
anhydrides - thiophosphoryl chloride.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 115-77-5: RZ2490000
LD50/LC50:
CAS# 115-77-5: Oral, mouse: LD50 = 25500 mg/kg; Oral, mouse: LD50 =
18500 mg/kg; Oral, rabbit: LD50 = 18500 mg/kg; Oral, rabbit: LD50 =
18500 mg/kg; Oral, rat: LD50 = 19500 mg/kg; Oral, rat: LD50 = 18500
mg/kg.
Carcinogenicity:
Pentaerythritol, 98% -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Ecotoxicity:
Fish-toxicity: LC0>5000 mg/l/48H Leusiscus idus Daphnia-toxicity:
EC50:38900 mg/l/24H Daphnia magna Algae-toxicity: EC3:16500 mg/l/7D
Scenedesmus subspicatus Bacteria-toxicity: EC10:18200 mg/l/18H
Pseudomonas putida COD=1230 mg O2/g; ThOD=1300 mg O2/g
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 115-77-5: 1
Canada
CAS# 115-77-5 is listed on Canada's DSL List.
CAS# 115-77-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 115-77-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Decanethiol, 98% (titr.)
| 143-10-2 |
|
2-Chloroaniline, 98+%
| |
|
3-Fluoro-4-methylbenzonitrile
| 170572-49-3 |
|
p-Anisic acid, 98%
| |
|
BS Buffer Solution pH 9.225
| 1303-96-4 |
|
2,4-Difluorobenzaldehyde
| 1550-35-2 |
|
9-Anthracenemethanol, 98%
| 1468-95-7 |
|
2,3,6-Trichlorophenylacetic acid
| 85-34-7 |
|
Phenylhydroquinone Diacetate
| 58244-28-3 |
|
Tris(acetoxyethyl)orthoformate
| 0-01-1 |
|
Diaminoethane tetra-acetic acid trisodium salt solutions (0.01M /
| 139-33-3 |
|
2-Chloro-P-Phenylenediamine Sulfate, 95%
| 61702-44-1 |
|
S-Triazolo(4,3-a)Quinoline
| 235-06-3 |
|
(3,4-Dichlorophenyl)-[(tetrahydro-pyran-2-yloxy)]-acetonitrile
| 0-01-1 |
|
1-Pentanesulfonic acid sodium salt premixed concentrate
| 67-56-1 |
|
1-(Benzofuran-2-yl)-4,4-5,5,5-pentafluoro-1,3-pentanedione
| 0-01-1 |
|
AZ12311148
| 0-01-1 |
|
Bis(N,N-diisopropylamino)methoxyphosphine
| 92611-10-4 |
|
(3,4-Dichloro-phenyl)-trimethylsilanyloxy-acetonitrile
| 95392-03-3 |
|
Ammonium-4-Chloro-7-Sulfobenzofurazan
| 81377-14-2 |
|
2-Bromoethyl-4-bromophenyl ether, 98%
| 18800-30-1 |
|
2-Bromovaleryl chloride
| 42768-45-6 |
|
2-Pyrid-3-yl-4,5-dihydro-1,3-thiazole-4-carboxylic acid
| 116247-03-1 |
|
2,3-Pyridinedicarboxylic acid, 99%
| 89-00-9 |
|
2'-Fluoroacetophenone, 97%
| |
|
Substituted Alkoxyaminophenylpiperizinylbenzoic acid
| 0-01-1 |
|
Chromic acid mix detergent
| 7664-93-9 |
|
Potassium chromate solution, 5% w/v
| 7732-18-5 |
|
Acetic acid based buffer
| 64-19-7 |
|
N,N'-Dioctadecyloxacarbocyanine p-toluenesulfonate, 99% (uv-vis)
| 60711-74-2 |
|
4-Methoxyindole
| 4837-90-5 |
|
4-Chlorophthalic acid, monosodium salt, tech.
| 56047-23-5 |
|
alpha-D-Glucose pentaacetate, 98%
| 604-68-2 |
|
1-Bromo-2-(2-methoxyethoxy)ethane, 98%
| 54149-17-6 |
|
3,5-Dinitrobenzoic acid, 99%
| 99-34-3 |
|
trans-2,trans-4-Hexadienal, 95%
| 142-83-6 |
|
N-(2-Hydroxyethyl)iminodiacetic acid, 98%
| 93-62-9 |
|
4-Bromobenzo-15-Crown-5, 96%
| 0-00-1 |
|
1-Nitronaphthalene, 99%
| 86-57-7 |
|
Boron Atomic Absorption Standard Solution 1 mg/ml B in Water
| 7440-42-8 |
|
4-Epitetracycline Hydrochloride,"Can be used as Secondary Standard."
| 23313-80-6 |
|
Dowex 50x8-200 Ion-Exchange Resin
| 11119-67-8 |
|
2,3-Dimethylmaleic Anhydride, 97%
| 766-39-2 |
|
D-Raffinose Pentahydrate
| 512-69-6 |
|
Pentaerythritol, 98%
| 115-77-5 |
|
Perfluorooctyl bromide, 99.5+%
| 423-55-2 |
|
Diethyl Iminodiacetate, 99% (GC)
| 6290-05-7 |
|
3-Methylene-2-Norbornanone, 97%
| 5597-27-3 |
|
2-(2-Thienyl)ethanol , 99%
| 5402-55-1 |
|
1,4-Dimethoxyantracene, 98% (uv-vis)
| 13076-29-4 |
|
|