Search   
MSDS 
:
 2-Bromovaleryl chloride
CAS 
:
 42768-45-6
SYNONYMS 
:
 2-Bromopentanoyl chloride; alpha-Bromovaleroyl chloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 42768-45-6 |2-Bromovaleryl chloride | 98 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 29 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Contact with water liberates toxic gas. Causes burns.

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Harmful if absorbed through the skin. Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use of water will produce irritating and toxic
vapors of hydrogen chloride. Hydrochloric acid solutions react with
most metals, forming flammable hydrogen gas.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Provide ventilation. Do not expose
spill to water.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not allow water
to get into the container because of violent reaction. Do not get in
eyes, on skin, or on clothing. Do not breathe vapor or mist.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Corrosives area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 42768-45-6:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
The absence of published exposure limits does not
mean that a substance poses no inhalation hazard. If
inhalation exposure is likely or if irritation or
other symptoms are experienced, wear a NIOSH/MSHA or
European Standard EN 149 approved respirator.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless to pale yellow
Odor: Not available.
pH: acidic
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 115 deg C @ 3 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C5H8BrClO
Molecular Weight: 199.47

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. Material hydrolyzes in contact with
moisture/water releasing toxic and corrosive fumes of hydrogen
chloride and aqueous hydrochloric acid.
Conditions to Avoid:
Moisture, excess heat.
Incompatibilities with Other Materials:
Strong bases, metals, strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, bromide fumes.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 42768-45-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Bromovaleryl chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Water-Reactive Liquid, Corrosive, N.O.S.
Hazard Class: 4.3
UN Number: 3129
Packing Group: II
IMO
Shipping Name: Water-Reactive Liquid, Corrosive, N.O.S.
Hazard Class: 4.3
UN Number: 3129
Packing Group: II
RID/ADR
Shipping Name: Water-Reactive Liquid, Corrosive, N.O.S.
Hazard Class: 4.3
UN Number: 3129
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 29 Contact with water liberates toxic gas.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 42768-45-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 42768-45-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 42768-45-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/21/2005 Revision #1 Date: 5/16/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Decanethiol, 98% (titr.) 143-10-2
2-Chloroaniline, 98+%
3-Fluoro-4-methylbenzonitrile 170572-49-3
p-Anisic acid, 98%
BS Buffer Solution pH 9.225 1303-96-4
2,4-Difluorobenzaldehyde 1550-35-2
9-Anthracenemethanol, 98% 1468-95-7
2,3,6-Trichlorophenylacetic acid 85-34-7
Phenylhydroquinone Diacetate 58244-28-3
Tris(acetoxyethyl)orthoformate 0-01-1
Diaminoethane tetra-acetic acid trisodium salt solutions (0.01M / 139-33-3
2-Chloro-P-Phenylenediamine Sulfate, 95% 61702-44-1
S-Triazolo(4,3-a)Quinoline 235-06-3
(3,4-Dichlorophenyl)-[(tetrahydro-pyran-2-yloxy)]-acetonitrile 0-01-1
1-Pentanesulfonic acid sodium salt premixed concentrate 67-56-1
1-(Benzofuran-2-yl)-4,4-5,5,5-pentafluoro-1,3-pentanedione 0-01-1
AZ12311148 0-01-1
Bis(N,N-diisopropylamino)methoxyphosphine 92611-10-4
(3,4-Dichloro-phenyl)-trimethylsilanyloxy-acetonitrile 95392-03-3
Ammonium-4-Chloro-7-Sulfobenzofurazan 81377-14-2
2-Bromoethyl-4-bromophenyl ether, 98% 18800-30-1
2-Bromovaleryl chloride 42768-45-6
2-Pyrid-3-yl-4,5-dihydro-1,3-thiazole-4-carboxylic acid 116247-03-1
2,3-Pyridinedicarboxylic acid, 99% 89-00-9
2'-Fluoroacetophenone, 97%
Substituted Alkoxyaminophenylpiperizinylbenzoic acid 0-01-1
Chromic acid mix detergent 7664-93-9
Potassium chromate solution, 5% w/v 7732-18-5
Acetic acid based buffer 64-19-7
N,N'-Dioctadecyloxacarbocyanine p-toluenesulfonate, 99% (uv-vis) 60711-74-2
4-Methoxyindole 4837-90-5
4-Chlorophthalic acid, monosodium salt, tech. 56047-23-5
alpha-D-Glucose pentaacetate, 98% 604-68-2
1-Bromo-2-(2-methoxyethoxy)ethane, 98% 54149-17-6
3,5-Dinitrobenzoic acid, 99% 99-34-3
trans-2,trans-4-Hexadienal, 95% 142-83-6
N-(2-Hydroxyethyl)iminodiacetic acid, 98% 93-62-9
4-Bromobenzo-15-Crown-5, 96% 0-00-1
1-Nitronaphthalene, 99% 86-57-7
Boron Atomic Absorption Standard Solution 1 mg/ml B in Water 7440-42-8
4-Epitetracycline Hydrochloride,"Can be used as Secondary Standard." 23313-80-6
Dowex 50x8-200 Ion-Exchange Resin 11119-67-8
2,3-Dimethylmaleic Anhydride, 97% 766-39-2
D-Raffinose Pentahydrate 512-69-6
Pentaerythritol, 98% 115-77-5
Perfluorooctyl bromide, 99.5+% 423-55-2
Diethyl Iminodiacetate, 99% (GC) 6290-05-7
3-Methylene-2-Norbornanone, 97% 5597-27-3
2-(2-Thienyl)ethanol , 99% 5402-55-1
1,4-Dimethoxyantracene, 98% (uv-vis) 13076-29-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net