Search   
MSDS 
:
 2,4-Difluorobenzaldehyde
CAS 
:
 1550-35-2
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1550-35-2 |2,4-Difluorobenzaldehyde | 98 | 216-287-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 10 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Flammable liquid
and vapor.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray,
dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Avoid ingestion and inhalation. Wash clothing before reuse.
Do not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames. Use only with
adequate ventilation. Keep away from heat, sparks and flame.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 1550-35-2:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 65-66 deg C @ 17 mmHg
Freezing/Melting Point: 2-3 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.290
Molecular Formula: C7H4F2O
Molecular Weight: 142.1

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1550-35-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,4-Difluorobenzaldehyde -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ALDEHYDES, N.O.S.*
Hazard Class: 3
UN Number: 1989
Packing Group: III
IMO
Shipping Name: ALDEHYDES, N.O.S.
Hazard Class: 3
UN Number: 1989
Packing Group: III
RID/ADR
Shipping Name: ALDEHYDES, N.O.S.
Hazard Class: 3
UN Number: 1989
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 10 Flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 1550-35-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1550-35-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1550-35-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/03/2005 Revision #2 Date: 2/03/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Decanethiol, 98% (titr.) 143-10-2
2-Chloroaniline, 98+%
3-Fluoro-4-methylbenzonitrile 170572-49-3
p-Anisic acid, 98%
BS Buffer Solution pH 9.225 1303-96-4
2,4-Difluorobenzaldehyde 1550-35-2
9-Anthracenemethanol, 98% 1468-95-7
2,3,6-Trichlorophenylacetic acid 85-34-7
Phenylhydroquinone Diacetate 58244-28-3
Tris(acetoxyethyl)orthoformate 0-01-1
Diaminoethane tetra-acetic acid trisodium salt solutions (0.01M / 139-33-3
2-Chloro-P-Phenylenediamine Sulfate, 95% 61702-44-1
S-Triazolo(4,3-a)Quinoline 235-06-3
(3,4-Dichlorophenyl)-[(tetrahydro-pyran-2-yloxy)]-acetonitrile 0-01-1
1-Pentanesulfonic acid sodium salt premixed concentrate 67-56-1
1-(Benzofuran-2-yl)-4,4-5,5,5-pentafluoro-1,3-pentanedione 0-01-1
AZ12311148 0-01-1
Bis(N,N-diisopropylamino)methoxyphosphine 92611-10-4
(3,4-Dichloro-phenyl)-trimethylsilanyloxy-acetonitrile 95392-03-3
Ammonium-4-Chloro-7-Sulfobenzofurazan 81377-14-2
2-Bromoethyl-4-bromophenyl ether, 98% 18800-30-1
2-Bromovaleryl chloride 42768-45-6
2-Pyrid-3-yl-4,5-dihydro-1,3-thiazole-4-carboxylic acid 116247-03-1
2,3-Pyridinedicarboxylic acid, 99% 89-00-9
2'-Fluoroacetophenone, 97%
Substituted Alkoxyaminophenylpiperizinylbenzoic acid 0-01-1
Chromic acid mix detergent 7664-93-9
Potassium chromate solution, 5% w/v 7732-18-5
Acetic acid based buffer 64-19-7
N,N'-Dioctadecyloxacarbocyanine p-toluenesulfonate, 99% (uv-vis) 60711-74-2
4-Methoxyindole 4837-90-5
4-Chlorophthalic acid, monosodium salt, tech. 56047-23-5
alpha-D-Glucose pentaacetate, 98% 604-68-2
1-Bromo-2-(2-methoxyethoxy)ethane, 98% 54149-17-6
3,5-Dinitrobenzoic acid, 99% 99-34-3
trans-2,trans-4-Hexadienal, 95% 142-83-6
N-(2-Hydroxyethyl)iminodiacetic acid, 98% 93-62-9
4-Bromobenzo-15-Crown-5, 96% 0-00-1
1-Nitronaphthalene, 99% 86-57-7
Boron Atomic Absorption Standard Solution 1 mg/ml B in Water 7440-42-8
4-Epitetracycline Hydrochloride,"Can be used as Secondary Standard." 23313-80-6
Dowex 50x8-200 Ion-Exchange Resin 11119-67-8
2,3-Dimethylmaleic Anhydride, 97% 766-39-2
D-Raffinose Pentahydrate 512-69-6
Pentaerythritol, 98% 115-77-5
Perfluorooctyl bromide, 99.5+% 423-55-2
Diethyl Iminodiacetate, 99% (GC) 6290-05-7
3-Methylene-2-Norbornanone, 97% 5597-27-3
2-(2-Thienyl)ethanol , 99% 5402-55-1
1,4-Dimethoxyantracene, 98% (uv-vis) 13076-29-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net