Search   
MSDS 
:
 3-Fluoro-4-methylbenzonitrile
CAS 
:
 170572-49-3
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 170572-49-3 |3-Fluoro-4-methylbenzonitrile | 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Harmful if absorbed through the skin. May
be metabolized to cyanide which in turn acts by inhibiting cytochrome
oxidase impairing cellular respiration.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
The toxicological properties of this substance have not been fully
investigated. Metabolism may release cyanide, which may result in
headache, dizziness, weakness, collapse, unconsciousness and
possible death.
Inhalation:
Harmful if inhaled. May cause respiratory tract irritation. The
toxicological properties of this substance have not been fully
investigated. May be metabolized to cyanide which in turns act by
inhibiting cytochrome oxidase impairing cellular respiration.
Chronic:
Exposure to small amounts of cyanide compounds over long periods of
time is reported to cause loss of appetite, headache, weakness,
nausea, dizziness, and symptoms of irritation of the upper
respiratory tract and eyes.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 170572-49-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 204 deg C @ 760mmHg
Freezing/Melting Point: 48-50 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H6FN
Molecular Weight: 135.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 170572-49-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-Fluoro-4-methylbenzonitrile -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: NITRILES, SOLID, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 3276
Packing Group: III
IMO
Shipping Name: NITRILES, SOLID, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 3276
Packing Group: III
RID/ADR
Shipping Name: NITRILES, SOLID, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 3276
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 170572-49-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 170572-49-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 170572-49-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/10/2005 Revision #1 Date: 1/10/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Decanethiol, 98% (titr.) 143-10-2
2-Chloroaniline, 98+%
3-Fluoro-4-methylbenzonitrile 170572-49-3
p-Anisic acid, 98%
BS Buffer Solution pH 9.225 1303-96-4
2,4-Difluorobenzaldehyde 1550-35-2
9-Anthracenemethanol, 98% 1468-95-7
2,3,6-Trichlorophenylacetic acid 85-34-7
Phenylhydroquinone Diacetate 58244-28-3
Tris(acetoxyethyl)orthoformate 0-01-1
Diaminoethane tetra-acetic acid trisodium salt solutions (0.01M / 139-33-3
2-Chloro-P-Phenylenediamine Sulfate, 95% 61702-44-1
S-Triazolo(4,3-a)Quinoline 235-06-3
(3,4-Dichlorophenyl)-[(tetrahydro-pyran-2-yloxy)]-acetonitrile 0-01-1
1-Pentanesulfonic acid sodium salt premixed concentrate 67-56-1
1-(Benzofuran-2-yl)-4,4-5,5,5-pentafluoro-1,3-pentanedione 0-01-1
AZ12311148 0-01-1
Bis(N,N-diisopropylamino)methoxyphosphine 92611-10-4
(3,4-Dichloro-phenyl)-trimethylsilanyloxy-acetonitrile 95392-03-3
Ammonium-4-Chloro-7-Sulfobenzofurazan 81377-14-2
2-Bromoethyl-4-bromophenyl ether, 98% 18800-30-1
2-Bromovaleryl chloride 42768-45-6
2-Pyrid-3-yl-4,5-dihydro-1,3-thiazole-4-carboxylic acid 116247-03-1
2,3-Pyridinedicarboxylic acid, 99% 89-00-9
2'-Fluoroacetophenone, 97%
Substituted Alkoxyaminophenylpiperizinylbenzoic acid 0-01-1
Chromic acid mix detergent 7664-93-9
Potassium chromate solution, 5% w/v 7732-18-5
Acetic acid based buffer 64-19-7
N,N'-Dioctadecyloxacarbocyanine p-toluenesulfonate, 99% (uv-vis) 60711-74-2
4-Methoxyindole 4837-90-5
4-Chlorophthalic acid, monosodium salt, tech. 56047-23-5
alpha-D-Glucose pentaacetate, 98% 604-68-2
1-Bromo-2-(2-methoxyethoxy)ethane, 98% 54149-17-6
3,5-Dinitrobenzoic acid, 99% 99-34-3
trans-2,trans-4-Hexadienal, 95% 142-83-6
N-(2-Hydroxyethyl)iminodiacetic acid, 98% 93-62-9
4-Bromobenzo-15-Crown-5, 96% 0-00-1
1-Nitronaphthalene, 99% 86-57-7
Boron Atomic Absorption Standard Solution 1 mg/ml B in Water 7440-42-8
4-Epitetracycline Hydrochloride,"Can be used as Secondary Standard." 23313-80-6
Dowex 50x8-200 Ion-Exchange Resin 11119-67-8
2,3-Dimethylmaleic Anhydride, 97% 766-39-2
D-Raffinose Pentahydrate 512-69-6
Pentaerythritol, 98% 115-77-5
Perfluorooctyl bromide, 99.5+% 423-55-2
Diethyl Iminodiacetate, 99% (GC) 6290-05-7
3-Methylene-2-Norbornanone, 97% 5597-27-3
2-(2-Thienyl)ethanol , 99% 5402-55-1
1,4-Dimethoxyantracene, 98% (uv-vis) 13076-29-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net