Search   
MSDS 
:
 n-Methyl-4-nitroaniline, 97%
CAS 
:
 100-15-2
SYNONYMS 
:
 Benzenamine, N-methyl-4-nitro-
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 100-15-2 |N-Methyl-4-nitroaniline | 97 | 202-823-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25 33

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if swallowed. Danger
of cumulative effects.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause skin irritation. Absorption into the body may cause
cyanosis (bluish discoloration of skin due to deficient oxygenation
of the blood).
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Methemoglobinemia is characterized by dizziness,
drowsiness, headache, shortness of breath, cyanosis (bluish
discoloration of skin due to deficient oxygenation of the blood),
rapid heart rate and chocolate-brown colored blood. Overexposure may
cause methemoglobinemia.
Inhalation:
May cause respiratory tract irritation. Methemoglobinemia is
characterized by dizziness, drowsiness, headache, shortness of
breath, cyanosis (bluish discoloration of skin due to deficient
oxygenation of the blood), rapid heart rate and chocolate-brown
blood. Inhalation of aniline causes anoxia due to the formation of
methemoglobin.
Chronic:
May cause methemoglobinemia, which is characterized by
chocolate-brown colored blood, headache, weakness, dizziness, breath
shortness, cyanosis (bluish skin due to deficient oxygenation of
blood), rapid heart rate, unconsciousness and possible death.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Remove all contaminated clothing immediately.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:
For methemoglobinemia, administer oxygen alone or with Methylene
Blue depending on the methemoglobin concentration in the blood.
Antidote:
Methylene blue, alone or in combination with oxygen is indicated as
a treatment in nitrite induced methemoglobinemia.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Keep containers tightly closed. Store in a cool, dry area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 100-15-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: gold
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 151.00 - 153.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: C7H8N2O2
Molecular Weight: 152.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen, ammonia.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 100-15-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N-Methyl-4-nitroaniline -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
R 33 Danger of cumulative effects.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37 Wear suitable protective clothing and
gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 100-15-2: No information available.
Canada
CAS# 100-15-2 is listed on Canada's NDSL List.
CAS# 100-15-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 100-15-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Di-tert-butyl dicarbonate, 97% 24424-99-5
Ethyl 3-Ethoxyacrylate 99% 1001-26-9
p-Toluenesulfonic acid monohydrate, 99% 6192-52-5
p-Toluenesulfonic acid monohydrate, 99% (titr.) 6192-52-5
1-Methylbenzimidazole-2-sulfonic acid, 99% 5533-38-0
2,3-Dimethylphenol, 99% 526-75-0
4-Quaterphenyl 135-70-6
4-Quaterphenyl, scintillation grade 135-70-6
Iodoform, 99+% 75-47-8
Phthalic acid, 99% 88-99-3
2-Methylnaphthalene, 95-97% 91-57-6
Cyclopropyl Phenyl Sulfide, 98% 14633-54-6
1-Butanethiol 109-79-5
Cesium Hydroxide, 99%, 50 wt% Solution In Water 7732-18-5
N-Acetylsulfanilyl Chloride, 99% (Titr.) 121-60-8
Linoleic acid, 99% (gc) 60-33-3
Cacodylic acid, sodium salt hydrate, 98% 6131-99-3
5-Fluorescein Isothiocyanate, Isomer I 90% (UV-VIS) 3326-32-7
7-Hydroxy-4-Methylcoumarin, 97% 90-33-5
Tin (II) Chloride Dihydrate, 97% 10025-69-1
Tin (II) Chloride Dihydrate, Reagent ACS (Crystals) 10025-69-1
Phenylacetaldehyde, 80-90% (GC) 122-78-1
Butyraldehyde, 99% 123-72-8
2-(Dimethylamino)ethyl methacrylate, 99%, stabilized with 0.2% MEHQ 150-76-5
Poly(vinyl alcohol), 88% Hydrolyzed Average M.W. 22000 9002-89-5
Poly(Vinyl Alcohol), 75% Hydrolyzed 9002-89-5
Poly(vinyl alcohol), 95% Hydrolyzed Average M.W.95.000 9002-89-5
Poly(vinyl alcohol), 98% Hydrolyzed 9002-89-5
Poly(vinyl alcohol), 99-100% Hydrolyzed 9002-89-5
1-Methoxynaphthalene, 98+% 2216-69-5
Calcium formate, 98% (titr.) 544-17-2
Poly(butadiene), 98% cis, average m.w. 2- 300.000 9003-17-2
Polybutadiene (m.n. 5000) 9003-17-2
Dichloroisocyanuric acid, sodium salt 2893-78-9
4,7-Dichloroquinoline, 99% 86-98-6
n-Methyl-4-nitroaniline, 97% 100-15-2
Geranyl linalool, tech.,ca.95%, mixture of isomers 1113-21-9
2-Bromonaphthalene, 99% (GC) 580-13-2
Azobenzene, 95% 103-33-3
2-Fluorobenzoic Acid, 99% 445-29-4
Reinecke salt, p.a. 13573-16-5
2-Isobutyl-3-methoxypyrazine, tech., 80% (cont. 20%
1-Bromoundecane, 99% 693-67-4
Isobutyric Acid, 99+% 79-31-2
P-Toluenesulfonamide, 98% 70-55-3
Methyl formate, 97% 107-31-3
2-(4-Methylphenyl)malondialdehyde, 95+% (nmr) 27956-35-0
Zinc Iodide, 98+% 10139-47-6
2',7'-Dichlorofluorescein 76-54-0
Phenyl ether, 99% 101-84-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net