**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 76-54-0 |2',7'-Dichlorofluorescein | 100 | 200-968-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. Prolonged and/or repeated contact may cause
irritation and/or dermatitis. May cause skin discoloration.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Reduce airborne dust and prevent scattering by moistening
with water. Clean up spills immediately, observing precautions in
the Protective Equipment section. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use with adequate
ventilation. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 76-54-0:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: slightly brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 280 deg C (decomposes)
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: C20H10Cl2O5
Molecular Weight: 400.973
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizers.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 76-54-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2',7'-Dichlorofluorescein -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 76-54-0: No information available.
Canada
CAS# 76-54-0 is listed on Canada's DSL List.
CAS# 76-54-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 76-54-0 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 4/23/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Di-tert-butyl dicarbonate, 97%
| 24424-99-5 |
|
Ethyl 3-Ethoxyacrylate 99%
| 1001-26-9 |
|
p-Toluenesulfonic acid monohydrate, 99%
| 6192-52-5 |
|
p-Toluenesulfonic acid monohydrate, 99% (titr.)
| 6192-52-5 |
|
1-Methylbenzimidazole-2-sulfonic acid, 99%
| 5533-38-0 |
|
2,3-Dimethylphenol, 99%
| 526-75-0 |
|
4-Quaterphenyl
| 135-70-6 |
|
4-Quaterphenyl, scintillation grade
| 135-70-6 |
|
Iodoform, 99+%
| 75-47-8 |
|
Phthalic acid, 99%
| 88-99-3 |
|
2-Methylnaphthalene, 95-97%
| 91-57-6 |
|
Cyclopropyl Phenyl Sulfide, 98%
| 14633-54-6 |
|
1-Butanethiol
| 109-79-5 |
|
Cesium Hydroxide, 99%, 50 wt% Solution In Water
| 7732-18-5 |
|
N-Acetylsulfanilyl Chloride, 99% (Titr.)
| 121-60-8 |
|
Linoleic acid, 99% (gc)
| 60-33-3 |
|
Cacodylic acid, sodium salt hydrate, 98%
| 6131-99-3 |
|
5-Fluorescein Isothiocyanate, Isomer I 90% (UV-VIS)
| 3326-32-7 |
|
7-Hydroxy-4-Methylcoumarin, 97%
| 90-33-5 |
|
Tin (II) Chloride Dihydrate, 97%
| 10025-69-1 |
|
Tin (II) Chloride Dihydrate, Reagent ACS (Crystals)
| 10025-69-1 |
|
Phenylacetaldehyde, 80-90% (GC)
| 122-78-1 |
|
Butyraldehyde, 99%
| 123-72-8 |
|
2-(Dimethylamino)ethyl methacrylate, 99%, stabilized with 0.2% MEHQ
| 150-76-5 |
|
Poly(vinyl alcohol), 88% Hydrolyzed Average M.W. 22000
| 9002-89-5 |
|
Poly(Vinyl Alcohol), 75% Hydrolyzed
| 9002-89-5 |
|
Poly(vinyl alcohol), 95% Hydrolyzed Average M.W.95.000
| 9002-89-5 |
|
Poly(vinyl alcohol), 98% Hydrolyzed
| 9002-89-5 |
|
Poly(vinyl alcohol), 99-100% Hydrolyzed
| 9002-89-5 |
|
1-Methoxynaphthalene, 98+%
| 2216-69-5 |
|
Calcium formate, 98% (titr.)
| 544-17-2 |
|
Poly(butadiene), 98% cis, average m.w. 2- 300.000
| 9003-17-2 |
|
Polybutadiene (m.n. 5000)
| 9003-17-2 |
|
Dichloroisocyanuric acid, sodium salt
| 2893-78-9 |
|
4,7-Dichloroquinoline, 99%
| 86-98-6 |
|
n-Methyl-4-nitroaniline, 97%
| 100-15-2 |
|
Geranyl linalool, tech.,ca.95%, mixture of isomers
| 1113-21-9 |
|
2-Bromonaphthalene, 99% (GC)
| 580-13-2 |
|
Azobenzene, 95%
| 103-33-3 |
|
2-Fluorobenzoic Acid, 99%
| 445-29-4 |
|
Reinecke salt, p.a.
| 13573-16-5 |
|
2-Isobutyl-3-methoxypyrazine, tech., 80% (cont. 20%
| |
|
1-Bromoundecane, 99%
| 693-67-4 |
|
Isobutyric Acid, 99+%
| 79-31-2 |
|
P-Toluenesulfonamide, 98%
| 70-55-3 |
|
Methyl formate, 97%
| 107-31-3 |
|
2-(4-Methylphenyl)malondialdehyde, 95+% (nmr)
| 27956-35-0 |
|
Zinc Iodide, 98+%
| 10139-47-6 |
|
2',7'-Dichlorofluorescein
| 76-54-0 |
|
Phenyl ether, 99%
| 101-84-8 |
|
|