**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10139-47-6 |Zinc Iodide | >98 | 233-396-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Air sensitive.Light sensitive.Hygroscopic (absorbs
moisture from the air).
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
Prolonged exposure to iodides may produce iodism in sensitive
individuals. Symptoms could include skin rash, running nose and
headache.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation. Store protected from light. Store protected
from air. Avoid contact with air and sunlight. Discard contaminated
shoes.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Store protected from moisture. Store protected from light and air.
Store under an inert atmosphere.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 10139-47-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin. Wear appropriate protective
clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Crystalline powder
Color: almost white
Odor: None reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 446 deg C
Autoignition Temperature: Not available.
Flash Point: 625 deg C ( 1,157.00 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: 625 C
Solubility in water: 4500 g/l (20 C)
Specific Gravity/Density: 4.7400
Molecular Formula: I2Zn
Molecular Weight: 319.189
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Air sensitive.
Sensitive to light. Hygroscopic: absorbs moisture or water from the
air.
Conditions to Avoid:
Light, dust generation, moisture, exposure to air, excess heat.
Incompatibilities with Other Materials:
Strong bases, potassium, peroxides.
Hazardous Decomposition Products:
Hydrogen iodide, toxic fumes of zinc oxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 10139-47-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Zinc Iodide -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 10139-47-6: No information available.
Canada
CAS# 10139-47-6 is listed on Canada's NDSL List.
CAS# 10139-47-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10139-47-6 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 8/21/1998 Revision #7 Date: 7/01/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Di-tert-butyl dicarbonate, 97%
| 24424-99-5 |
|
Ethyl 3-Ethoxyacrylate 99%
| 1001-26-9 |
|
p-Toluenesulfonic acid monohydrate, 99%
| 6192-52-5 |
|
p-Toluenesulfonic acid monohydrate, 99% (titr.)
| 6192-52-5 |
|
1-Methylbenzimidazole-2-sulfonic acid, 99%
| 5533-38-0 |
|
2,3-Dimethylphenol, 99%
| 526-75-0 |
|
4-Quaterphenyl
| 135-70-6 |
|
4-Quaterphenyl, scintillation grade
| 135-70-6 |
|
Iodoform, 99+%
| 75-47-8 |
|
Phthalic acid, 99%
| 88-99-3 |
|
2-Methylnaphthalene, 95-97%
| 91-57-6 |
|
Cyclopropyl Phenyl Sulfide, 98%
| 14633-54-6 |
|
1-Butanethiol
| 109-79-5 |
|
Cesium Hydroxide, 99%, 50 wt% Solution In Water
| 7732-18-5 |
|
N-Acetylsulfanilyl Chloride, 99% (Titr.)
| 121-60-8 |
|
Linoleic acid, 99% (gc)
| 60-33-3 |
|
Cacodylic acid, sodium salt hydrate, 98%
| 6131-99-3 |
|
5-Fluorescein Isothiocyanate, Isomer I 90% (UV-VIS)
| 3326-32-7 |
|
7-Hydroxy-4-Methylcoumarin, 97%
| 90-33-5 |
|
Tin (II) Chloride Dihydrate, 97%
| 10025-69-1 |
|
Tin (II) Chloride Dihydrate, Reagent ACS (Crystals)
| 10025-69-1 |
|
Phenylacetaldehyde, 80-90% (GC)
| 122-78-1 |
|
Butyraldehyde, 99%
| 123-72-8 |
|
2-(Dimethylamino)ethyl methacrylate, 99%, stabilized with 0.2% MEHQ
| 150-76-5 |
|
Poly(vinyl alcohol), 88% Hydrolyzed Average M.W. 22000
| 9002-89-5 |
|
Poly(Vinyl Alcohol), 75% Hydrolyzed
| 9002-89-5 |
|
Poly(vinyl alcohol), 95% Hydrolyzed Average M.W.95.000
| 9002-89-5 |
|
Poly(vinyl alcohol), 98% Hydrolyzed
| 9002-89-5 |
|
Poly(vinyl alcohol), 99-100% Hydrolyzed
| 9002-89-5 |
|
1-Methoxynaphthalene, 98+%
| 2216-69-5 |
|
Calcium formate, 98% (titr.)
| 544-17-2 |
|
Poly(butadiene), 98% cis, average m.w. 2- 300.000
| 9003-17-2 |
|
Polybutadiene (m.n. 5000)
| 9003-17-2 |
|
Dichloroisocyanuric acid, sodium salt
| 2893-78-9 |
|
4,7-Dichloroquinoline, 99%
| 86-98-6 |
|
n-Methyl-4-nitroaniline, 97%
| 100-15-2 |
|
Geranyl linalool, tech.,ca.95%, mixture of isomers
| 1113-21-9 |
|
2-Bromonaphthalene, 99% (GC)
| 580-13-2 |
|
Azobenzene, 95%
| 103-33-3 |
|
2-Fluorobenzoic Acid, 99%
| 445-29-4 |
|
Reinecke salt, p.a.
| 13573-16-5 |
|
2-Isobutyl-3-methoxypyrazine, tech., 80% (cont. 20%
| |
|
1-Bromoundecane, 99%
| 693-67-4 |
|
Isobutyric Acid, 99+%
| 79-31-2 |
|
P-Toluenesulfonamide, 98%
| 70-55-3 |
|
Methyl formate, 97%
| 107-31-3 |
|
2-(4-Methylphenyl)malondialdehyde, 95+% (nmr)
| 27956-35-0 |
|
Zinc Iodide, 98+%
| 10139-47-6 |
|
2',7'-Dichlorofluorescein
| 76-54-0 |
|
Phenyl ether, 99%
| 101-84-8 |
|
|