Search   
MSDS 
:
 p-Toluenesulfonic acid monohydrate, 99%
CAS 
:
 6192-52-5
SYNONYMS 
:
 Benzenesulfonic acid, 4-methyl-, monohydrate; Toluene, 4-sulfonic     acid, monohydrate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6192-52-5 |p-Toluenesulfonic acid monhydrate | 99 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs
moisture from the air).The toxicological properties of this material
have not been fully investigated.

Potential Health Effects
Eye:
May cause irreversible eye injury. Causes eye irritation and
possible burns.
Skin:
Causes skin irritation and possible burns.
Ingestion:
Causes digestive tract irritation with possible burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. May
cause burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Wear appropriate protective clothing to prevent contact with skin
and eyes. Wear a self-contained breathing apparatus (SCBA) to
prevent contact with thermal decomposition products. Containers may
explode in the heat of a fire. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use extinguishing media most appropriate for
the surrounding fire. Cool containers with flooding quantities of
water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Do not
get in eyes, on skin, or on clothing. Keep container tightly closed.
Do not ingest or inhale. Use only in a chemical fume hood. Discard
contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Do not store
near alkaline substances. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: white
Odor: none reported
pH: Not applicable.
Vapor Pressure: Not applicable.
Viscosity: Not available.
Boiling Point: 140 deg C @ 27 mmHg
Freezing/Melting Point: 103 deg C
Autoignition Temperature: Not applicable.
Flash Point: 103 deg C ( 217.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: Not available.
Molecular Formula: C7H8O3S.H2O
Molecular Weight: 172.1142

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat,
exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide, sodium oxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6192-52-5: DB7164000
LD50/LC50:
CAS# 6192-52-5: Oral, mouse: LD50 = 1683 mg/kg; Oral, rat: LD50 =
2570 mg/kg.
Carcinogenicity:
p-Toluenesulfonic acid monhydrate -
Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ARYLSULPHONIC ACIDS, SOLID
Hazard Class: 8
UN Number: 2585
Packing Group: III
IMO
Shipping Name: ARYLSULPHONIC ACIDS, SOLID
Hazard Class: 8
UN Number: 2585
Packing Group: III
RID/ADR
Shipping Name: ARYLSULPHONIC ACIDS, SOLID
Hazard Class: 8
UN Number: 2585
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37 Wear suitable gloves.
WGK (Water Danger/Protection)
CAS# 6192-52-5: 1
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6192-52-5 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 6192-52-5 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/24/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Di-tert-butyl dicarbonate, 97% 24424-99-5
Ethyl 3-Ethoxyacrylate 99% 1001-26-9
p-Toluenesulfonic acid monohydrate, 99% 6192-52-5
p-Toluenesulfonic acid monohydrate, 99% (titr.) 6192-52-5
1-Methylbenzimidazole-2-sulfonic acid, 99% 5533-38-0
2,3-Dimethylphenol, 99% 526-75-0
4-Quaterphenyl 135-70-6
4-Quaterphenyl, scintillation grade 135-70-6
Iodoform, 99+% 75-47-8
Phthalic acid, 99% 88-99-3
2-Methylnaphthalene, 95-97% 91-57-6
Cyclopropyl Phenyl Sulfide, 98% 14633-54-6
1-Butanethiol 109-79-5
Cesium Hydroxide, 99%, 50 wt% Solution In Water 7732-18-5
N-Acetylsulfanilyl Chloride, 99% (Titr.) 121-60-8
Linoleic acid, 99% (gc) 60-33-3
Cacodylic acid, sodium salt hydrate, 98% 6131-99-3
5-Fluorescein Isothiocyanate, Isomer I 90% (UV-VIS) 3326-32-7
7-Hydroxy-4-Methylcoumarin, 97% 90-33-5
Tin (II) Chloride Dihydrate, 97% 10025-69-1
Tin (II) Chloride Dihydrate, Reagent ACS (Crystals) 10025-69-1
Phenylacetaldehyde, 80-90% (GC) 122-78-1
Butyraldehyde, 99% 123-72-8
2-(Dimethylamino)ethyl methacrylate, 99%, stabilized with 0.2% MEHQ 150-76-5
Poly(vinyl alcohol), 88% Hydrolyzed Average M.W. 22000 9002-89-5
Poly(Vinyl Alcohol), 75% Hydrolyzed 9002-89-5
Poly(vinyl alcohol), 95% Hydrolyzed Average M.W.95.000 9002-89-5
Poly(vinyl alcohol), 98% Hydrolyzed 9002-89-5
Poly(vinyl alcohol), 99-100% Hydrolyzed 9002-89-5
1-Methoxynaphthalene, 98+% 2216-69-5
Calcium formate, 98% (titr.) 544-17-2
Poly(butadiene), 98% cis, average m.w. 2- 300.000 9003-17-2
Polybutadiene (m.n. 5000) 9003-17-2
Dichloroisocyanuric acid, sodium salt 2893-78-9
4,7-Dichloroquinoline, 99% 86-98-6
n-Methyl-4-nitroaniline, 97% 100-15-2
Geranyl linalool, tech.,ca.95%, mixture of isomers 1113-21-9
2-Bromonaphthalene, 99% (GC) 580-13-2
Azobenzene, 95% 103-33-3
2-Fluorobenzoic Acid, 99% 445-29-4
Reinecke salt, p.a. 13573-16-5
2-Isobutyl-3-methoxypyrazine, tech., 80% (cont. 20%
1-Bromoundecane, 99% 693-67-4
Isobutyric Acid, 99+% 79-31-2
P-Toluenesulfonamide, 98% 70-55-3
Methyl formate, 97% 107-31-3
2-(4-Methylphenyl)malondialdehyde, 95+% (nmr) 27956-35-0
Zinc Iodide, 98+% 10139-47-6
2',7'-Dichlorofluorescein 76-54-0
Phenyl ether, 99% 101-84-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net