Search   
MSDS 
:
 Iron(iii) chloride hexahydrate, reagent acs
CAS 
:
 10025-77-1
SYNONYMS 
:
 Ferric chloride hexahydrate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10025-77-1 |Iron(III) chloride hexahydrate | | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Hygroscopic (absorbs moisture
from the air).

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Get medical aid immediately. Do NOT induce vomiting. If conscious
and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Substance is noncombustible.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 10025-77-1:

Belgium - TWA: (listed as iron salts (soluble)): 1 mg/m3 VLE (as
Malaysia: (listed as iron salts (soluble)): 1 mg/m3 TWA (as Fe)
Netherlands: (listed as iron salts (soluble)): 1 mg/m3 MAC (as Fe
Spain: (listed as iron salts (soluble)): 1 mg/m3 VLA-ED (as Fe)

Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Lumps
Color: orange
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 280 - 285 deg C @ 760mmHg
Freezing/Melting Point: 37 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 920 g/l (20C)
Specific Gravity/Density:
Molecular Formula: FeCl3.6H2O
Molecular Weight: 270.29

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, exposure to
moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, alkali metals, allyl chloride, ethylene
oxide, potassium, sodium.
Hazardous Decomposition Products:
Hydrogen chloride, oxides of iron.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 10025-77-1: NO5425000
LD50/LC50:
Not available.
Carcinogenicity:
Iron(III) chloride hexahydrate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
logPOW: -4

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3260
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3260
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3260
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 10025-77-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 10025-77-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10025-77-1 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/17/1998 Revision #2 Date: 6/24/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-tert.-Butylbenzoic acid, 99% 98-73-7
Sodium bisulfite, powder, p.a. 7446-09-5
1,2-Dibromoethane, 99% 106-93-4
1,2-Dichloroethane, 99.8+% (GC) 107-06-2
1,2-Dichloroethane, laser grade 107-06-2
1,2-Dichloroethane, reagent ACS 107-06-2
1,2-Dichloroethane, reagent ACS, spectro grade, 99+% 107-06-2
HEPES, Sodium Salt, 99% 75277-39-3
n-Butyl Lactate, 99% (GC) 138-22-7
Ethylenediamine 107-15-3
4-Chlorophenyl isocyanate 104-12-1
Iron (III) Chloride, Anhydrous, 98% 7705-08-0
N-(2-Chloroethyl)-Morpholine Hydrochloride, 99% 3647-69-6
Iron(iii) chloride hexahydrate, granulated, c.p. 10025-77-1
Iron(iii) chloride hexahydrate, p.a. 10025-77-1
Iron(iii) chloride hexahydrate, reagent acs 10025-77-1
4-(Trifluoromethyl)Benzophenone, 97% 728-86-9
s-(4-Nitrobenzyl)-6-thioinosine 38048-32-7
2,6-Dichlorobenzyl Alcohol, 99% 15258-73-8
Iron(III) nitrate nonahydrate, p.a. 7782-61-8
Isopropyl Acetate, 99% 108-21-4
Iron(II) sulfate heptahydrate, p.a. 7720-78-7
Florisil, 100-200 mesh 1343-88-0
Tetramethylsilane, 99.9+% ,NMR Grade 75-76-3
Diphosphorus Tetraiodide, 95% 13455-00-0
Epichlorohydrin 106-89-8
Formamide, 99.5+% 75-12-7
Formamide, polarographic and nonaqueous, titration grade 75-12-7
Formamide, spectro grade 75-12-7
Formamide, reagent ACS 75-12-7
Patent blue vf, indicator grade 129-17-9
Acid Fuchsin, High Purity Biological Stain 3244-88-0
Fumaric acid, 99% 110-17-8
Phenyl dichlorophosphate, 99% 770-12-7
2-Furaldehyde, 99% 98-01-1
D-(+)-Galactose, 99+% 59-23-4
1-Tetradecanol, 99+% 112-72-1
Gallic Acid, Monohydrate, C.P. 149-91-7
Metanil yellow, 98% (TLC) 587-98-4
Crystal Violet, Indicator 548-62-9
Sodium triethylborohydride, 1M solution in tetrahydrofuran 109-99-9
Crystal Violet (Cert), Reagent ACS 548-62-9
Glycerol, 99+% 56-81-5
Glycerol, 83.5-88.5 Wt % Aqueous Solution 56-81-5
Glycerol, Reagent ACS 56-81-5
Glycerol, 86-88%, P.A. 56-81-5
Glycine, 98% 56-40-6
Phthalic Anhydride, 99% 85-44-9
Phthalic Anhydride, Reagent acs 85-44-9
n-Decylamine 96% 2016-57-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net