Search   
MSDS 
:
 HEPES, Sodium Salt, 99%
CAS 
:
 75277-39-3
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 75277-39-3 |HEPES, sodium salt | 99 | 278-169-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 75277-39-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: Not available.
pH: 10 @ 0.5% soln.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H17N2O4SNa
Molecular Weight: 260.27

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants, exposure to
moist air or water.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 75277-39-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
HEPES, sodium salt -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 75277-39-3: 1
Canada
CAS# 75277-39-3 is listed on Canada's NDSL List.
CAS# 75277-39-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 75277-39-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/13/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-tert.-Butylbenzoic acid, 99% 98-73-7
Sodium bisulfite, powder, p.a. 7446-09-5
1,2-Dibromoethane, 99% 106-93-4
1,2-Dichloroethane, 99.8+% (GC) 107-06-2
1,2-Dichloroethane, laser grade 107-06-2
1,2-Dichloroethane, reagent ACS 107-06-2
1,2-Dichloroethane, reagent ACS, spectro grade, 99+% 107-06-2
HEPES, Sodium Salt, 99% 75277-39-3
n-Butyl Lactate, 99% (GC) 138-22-7
Ethylenediamine 107-15-3
4-Chlorophenyl isocyanate 104-12-1
Iron (III) Chloride, Anhydrous, 98% 7705-08-0
N-(2-Chloroethyl)-Morpholine Hydrochloride, 99% 3647-69-6
Iron(iii) chloride hexahydrate, granulated, c.p. 10025-77-1
Iron(iii) chloride hexahydrate, p.a. 10025-77-1
Iron(iii) chloride hexahydrate, reagent acs 10025-77-1
4-(Trifluoromethyl)Benzophenone, 97% 728-86-9
s-(4-Nitrobenzyl)-6-thioinosine 38048-32-7
2,6-Dichlorobenzyl Alcohol, 99% 15258-73-8
Iron(III) nitrate nonahydrate, p.a. 7782-61-8
Isopropyl Acetate, 99% 108-21-4
Iron(II) sulfate heptahydrate, p.a. 7720-78-7
Florisil, 100-200 mesh 1343-88-0
Tetramethylsilane, 99.9+% ,NMR Grade 75-76-3
Diphosphorus Tetraiodide, 95% 13455-00-0
Epichlorohydrin 106-89-8
Formamide, 99.5+% 75-12-7
Formamide, polarographic and nonaqueous, titration grade 75-12-7
Formamide, spectro grade 75-12-7
Formamide, reagent ACS 75-12-7
Patent blue vf, indicator grade 129-17-9
Acid Fuchsin, High Purity Biological Stain 3244-88-0
Fumaric acid, 99% 110-17-8
Phenyl dichlorophosphate, 99% 770-12-7
2-Furaldehyde, 99% 98-01-1
D-(+)-Galactose, 99+% 59-23-4
1-Tetradecanol, 99+% 112-72-1
Gallic Acid, Monohydrate, C.P. 149-91-7
Metanil yellow, 98% (TLC) 587-98-4
Crystal Violet, Indicator 548-62-9
Sodium triethylborohydride, 1M solution in tetrahydrofuran 109-99-9
Crystal Violet (Cert), Reagent ACS 548-62-9
Glycerol, 99+% 56-81-5
Glycerol, 83.5-88.5 Wt % Aqueous Solution 56-81-5
Glycerol, Reagent ACS 56-81-5
Glycerol, 86-88%, P.A. 56-81-5
Glycine, 98% 56-40-6
Phthalic Anhydride, 99% 85-44-9
Phthalic Anhydride, Reagent acs 85-44-9
n-Decylamine 96% 2016-57-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net