Search   
MSDS 
:
 4-(Trifluoromethyl)Benzophenone, 97%
CAS 
:
 728-86-9
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 728-86-9 |4-(Trifluoromethyl)Benzophenone | 97 | 211-974-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 728-86-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: off-white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 116.00 - 118.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C14H9F3O
Molecular Weight: 250.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 728-86-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-(Trifluoromethyl)Benzophenone -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 728-86-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 728-86-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 728-86-9 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-tert.-Butylbenzoic acid, 99% 98-73-7
Sodium bisulfite, powder, p.a. 7446-09-5
1,2-Dibromoethane, 99% 106-93-4
1,2-Dichloroethane, 99.8+% (GC) 107-06-2
1,2-Dichloroethane, laser grade 107-06-2
1,2-Dichloroethane, reagent ACS 107-06-2
1,2-Dichloroethane, reagent ACS, spectro grade, 99+% 107-06-2
HEPES, Sodium Salt, 99% 75277-39-3
n-Butyl Lactate, 99% (GC) 138-22-7
Ethylenediamine 107-15-3
4-Chlorophenyl isocyanate 104-12-1
Iron (III) Chloride, Anhydrous, 98% 7705-08-0
N-(2-Chloroethyl)-Morpholine Hydrochloride, 99% 3647-69-6
Iron(iii) chloride hexahydrate, granulated, c.p. 10025-77-1
Iron(iii) chloride hexahydrate, p.a. 10025-77-1
Iron(iii) chloride hexahydrate, reagent acs 10025-77-1
4-(Trifluoromethyl)Benzophenone, 97% 728-86-9
s-(4-Nitrobenzyl)-6-thioinosine 38048-32-7
2,6-Dichlorobenzyl Alcohol, 99% 15258-73-8
Iron(III) nitrate nonahydrate, p.a. 7782-61-8
Isopropyl Acetate, 99% 108-21-4
Iron(II) sulfate heptahydrate, p.a. 7720-78-7
Florisil, 100-200 mesh 1343-88-0
Tetramethylsilane, 99.9+% ,NMR Grade 75-76-3
Diphosphorus Tetraiodide, 95% 13455-00-0
Epichlorohydrin 106-89-8
Formamide, 99.5+% 75-12-7
Formamide, polarographic and nonaqueous, titration grade 75-12-7
Formamide, spectro grade 75-12-7
Formamide, reagent ACS 75-12-7
Patent blue vf, indicator grade 129-17-9
Acid Fuchsin, High Purity Biological Stain 3244-88-0
Fumaric acid, 99% 110-17-8
Phenyl dichlorophosphate, 99% 770-12-7
2-Furaldehyde, 99% 98-01-1
D-(+)-Galactose, 99+% 59-23-4
1-Tetradecanol, 99+% 112-72-1
Gallic Acid, Monohydrate, C.P. 149-91-7
Metanil yellow, 98% (TLC) 587-98-4
Crystal Violet, Indicator 548-62-9
Sodium triethylborohydride, 1M solution in tetrahydrofuran 109-99-9
Crystal Violet (Cert), Reagent ACS 548-62-9
Glycerol, 99+% 56-81-5
Glycerol, 83.5-88.5 Wt % Aqueous Solution 56-81-5
Glycerol, Reagent ACS 56-81-5
Glycerol, 86-88%, P.A. 56-81-5
Glycine, 98% 56-40-6
Phthalic Anhydride, 99% 85-44-9
Phthalic Anhydride, Reagent acs 85-44-9
n-Decylamine 96% 2016-57-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net