Search   
MSDS 
:
 n-Decylamine 96%
CAS 
:
 2016-57-1
SYNONYMS 
:
 1-Decanamine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2016-57-1 |n-Decylamine | 96 | 217-957-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 22 24 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Toxic in contact with skin. Causes
burns.Corrosive.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns. May cause chemical conjunctivitis and corneal damage.
Skin:
Harmful if absorbed through the skin. May cause severe irritation
and possible burns. May cause irritation and dermatitis. May cause
cyanosis of the extremities. May cause skin rash (in milder cases),
and cold and clammy skin with cyanosis or pale color.
Ingestion:
Harmful if swallowed. May cause severe and permanent damage to the
digestive tract. Causes gastrointestinal tract burns. May cause
perforation of the digestive tract. Methemoglobinemia is
characterized by dizziness, drowsiness, headache, shortness of
breath, cyanosis (bluish discoloration of skin due to deficient
oxygenation of the blood), rapid heart rate and chocolate-brown
colored blood. Overexposure may cause methemoglobinemia. May cause
systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. Methemoglobinemia is characterized by dizziness,
drowsiness, headache, shortness of breath, cyanosis (bluish
discoloration of skin due to deficient oxygenation of the blood),
rapid heart rate and chocolate-brown blood. May cause systemic
effects. Inhalation at high concentrations may cause CNS depression
and asphixiation.
Chronic:
May cause methemoglobinemia, which is characterized by
chocolate-brown colored blood, headache, weakness, dizziness, breath
shortness, cyanosis (bluish skin due to deficient oxygenation of
blood), rapid heart rate, unconsciousness and possible death. Effects
may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
For methemoglobinemia, administer oxygen alone or with Methylene
Blue depending on the methemoglobin concentration in the blood.
Antidote:
Methylene blue, alone or in combination with oxygen is indicated as
a treatment in nitrite induced methemoglobinemia.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Water may be ineffective.
Material is lighter than water and a fire may be spread by the use of
water. Combustible liquid. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Do not ingest or
inhale. Discard contaminated shoes. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose empty containers to heat,
sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2016-57-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear very slight yellow
Odor: amine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 216.0 - 218.0 deg C
Freezing/Melting Point: 12.00 - 14.00 deg C
Autoignition Temperature: Not available.
Flash Point: 85 deg C ( 185.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .7870g/cm3
Molecular Formula: C10H23N
Molecular Weight: 157.30

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2016-57-1: HD6475000
LD50/LC50:
CAS# 2016-57-1: Oral, rat: LD50 = 280 uL/kg; Skin, rabbit: LD50 =
350 uL/kg.
Carcinogenicity:
n-Decylamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 22 Harmful if swallowed.
R 24 Toxic in contact with skin.
R 34 Causes burns.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 2016-57-1: No information available.
Canada
CAS# 2016-57-1 is listed on Canada's DSL List.
CAS# 2016-57-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2016-57-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 5/15/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-tert.-Butylbenzoic acid, 99% 98-73-7
Sodium bisulfite, powder, p.a. 7446-09-5
1,2-Dibromoethane, 99% 106-93-4
1,2-Dichloroethane, 99.8+% (GC) 107-06-2
1,2-Dichloroethane, laser grade 107-06-2
1,2-Dichloroethane, reagent ACS 107-06-2
1,2-Dichloroethane, reagent ACS, spectro grade, 99+% 107-06-2
HEPES, Sodium Salt, 99% 75277-39-3
n-Butyl Lactate, 99% (GC) 138-22-7
Ethylenediamine 107-15-3
4-Chlorophenyl isocyanate 104-12-1
Iron (III) Chloride, Anhydrous, 98% 7705-08-0
N-(2-Chloroethyl)-Morpholine Hydrochloride, 99% 3647-69-6
Iron(iii) chloride hexahydrate, granulated, c.p. 10025-77-1
Iron(iii) chloride hexahydrate, p.a. 10025-77-1
Iron(iii) chloride hexahydrate, reagent acs 10025-77-1
4-(Trifluoromethyl)Benzophenone, 97% 728-86-9
s-(4-Nitrobenzyl)-6-thioinosine 38048-32-7
2,6-Dichlorobenzyl Alcohol, 99% 15258-73-8
Iron(III) nitrate nonahydrate, p.a. 7782-61-8
Isopropyl Acetate, 99% 108-21-4
Iron(II) sulfate heptahydrate, p.a. 7720-78-7
Florisil, 100-200 mesh 1343-88-0
Tetramethylsilane, 99.9+% ,NMR Grade 75-76-3
Diphosphorus Tetraiodide, 95% 13455-00-0
Epichlorohydrin 106-89-8
Formamide, 99.5+% 75-12-7
Formamide, polarographic and nonaqueous, titration grade 75-12-7
Formamide, spectro grade 75-12-7
Formamide, reagent ACS 75-12-7
Patent blue vf, indicator grade 129-17-9
Acid Fuchsin, High Purity Biological Stain 3244-88-0
Fumaric acid, 99% 110-17-8
Phenyl dichlorophosphate, 99% 770-12-7
2-Furaldehyde, 99% 98-01-1
D-(+)-Galactose, 99+% 59-23-4
1-Tetradecanol, 99+% 112-72-1
Gallic Acid, Monohydrate, C.P. 149-91-7
Metanil yellow, 98% (TLC) 587-98-4
Crystal Violet, Indicator 548-62-9
Sodium triethylborohydride, 1M solution in tetrahydrofuran 109-99-9
Crystal Violet (Cert), Reagent ACS 548-62-9
Glycerol, 99+% 56-81-5
Glycerol, 83.5-88.5 Wt % Aqueous Solution 56-81-5
Glycerol, Reagent ACS 56-81-5
Glycerol, 86-88%, P.A. 56-81-5
Glycine, 98% 56-40-6
Phthalic Anhydride, 99% 85-44-9
Phthalic Anhydride, Reagent acs 85-44-9
n-Decylamine 96% 2016-57-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net