Search   
MSDS 
:
 Methyl Enanthate, 99%
CAS 
:
 106-73-0
SYNONYMS 
:
 Heptanoic Acid, Methyl Ester; Methyl Heptanoate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 106-73-0 |Methyl Enanthate | 99% | 203-428-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 10

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause skin irritation. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Ingestion of large amounts may cause CNS depression. May
cause cardiac arrhythmias, hypotension, and albuminuria.
Inhalation:
May cause respiratory tract irritation. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. May cause
cardiac abnormalities. Inhalation at high concentrations may cause
CNS depression and asphixiation. May cause burning sensation in the
chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas. Runoff from fire control or
dilution water may cause pollution.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 106-73-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 172 -173.4 deg C @ 760.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 52 deg C ( 125.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .8700g/cm3
Molecular Formula: C8H16O2
Molecular Weight: 144.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 106-73-0: MJ2297500
LD50/LC50:
CAS# 106-73-0: Oral, rat: LD50 = >5 gm/kg; Skin, rabbit: LD50 = >5
gm/kg.
Carcinogenicity:
Methyl Enanthate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.2
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 106-73-0: No information available.
Canada
CAS# 106-73-0 is listed on Canada's DSL List.
CAS# 106-73-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 106-73-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
alpha-Acetamidocinnamic acid, 98% 5469-45-4
4-(4-Nitrophenyl)-butyric acid, 99% 5600-62-4
Perinaphthenone 548-39-0
4-Bromo-2-Chloroaniline, 99% 38762-41-3
Malonic-d2 acid-d2, 99+ atom % d 813-56-9
Brefeldin A, Natural 20350-15-6
Thymol blue, sodium salt, indicator 81012-93-3
Tropinone, 99% 532-24-1
1-(4-Methylphenyl)-1-cyclopropanecarbonitrile, 95% 71172-78-6
9-Phenanthrol, Tech. 484-17-3
3,4,5,2',3',4'-Hexahydroxybenzophenone, 99% 52479-85-3
Trifluoroacetic Acid-D, 99 Atom % D 599-00-8
N'-benzyl-N,N-dimethylethylenediamine tech. 103-55-9
2,2,4,5,5-Pentamethyl-3-Imidazoline-1-Oxyl Free Radical, 98% 39753-74-7
Cyanogen iodide 506-78-5
Potassium Cyanate 590-28-3
Polymethylhydrosiloxane, ca.99.5% silicon 9004-73-3
1-(2,4-Dichlorophenyl)-1-Cyclopropyl Cyanide 71463-55-3
4-Pentylbenzoic acid, 99% 26311-45-5
Terbium(iii) nitrate pentahydrate, 99.999% 57584-27-7
Dimethyl Fumarate, 99% 624-49-7
2,6-Dibromophenol, 99+% 608-33-3
Carbostyril 124, Laser Grade 19840-99-4
3-(Hydroxymethyl)pyridine, 98% 100-55-0
Cyanoethyl Cellulose 9004-41-5
Methyl Enanthate, 99% 106-73-0
L-Alanyl-L-Alanine 1948-31-8
Methyl-12-doxyl-stearate, free radical 29639-21-2
4-(4-Fluorobenzoyl)Piperidine P-Toluenesulfonate, Contains HCl Salt, 132442-43-4
4-Hydroxy-3-methoxybenzyl alcohol, 99% 498-00-0
Alpha-Phenylcinnamic Acid, 98% 91-48-5
Methyl methoxyacetate, 99% 6290-49-9
Naringin, 97% 10236-47-2
Chlorotitanium triisopropoxide, 1.0 M solution in hexanes 110-54-3
3-Bromoquinoline, 98% 5332-24-1
Glutaric anhydride, 97% 108-55-4
3-endo-Hydroxymethylbicyclo[2.2.1]hept-5-enyl-2-endo-amine 0-01-1
5-Dimethylamino-1-Naphthalenesulfonic Acid, Monohydrate, 99% (Titr.) 4272-77-9
N-Methylpyrrole, 99+% (gc) 96-54-8
3,4-Dichlorobenzotrifluoride, 97% 328-84-7
1-(1-Naphthyl)-2-thiourea, 97% 86-88-4
2-Nitrobenzyl alcohol, 97% 612-25-9
5-Chloro-2-Pyridinol, 99% 4214-79-3
4-Pyridylacetic Acid Hydrochloride, 98% 28356-58-3
(4s,2rs)-2-phenylthiazolidine-4-carboxylic acid, 98%
1,3-Dichloro-4-fluorobenzene, 99% 1435-48-9
Heptanoic anhydride, 99% 626-27-7
Catecholborane, 1m solution in tetrahydrofuran 109-99-9
(+)-beta-Pinene oxide, tech. 75% 6931-54-0
5-Ethyl-3-Hydroxy-4-Methyl-2(5H)-Furanone, 98% 698-10-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net