Search   
MSDS 
:
 3,4-Dichlorobenzotrifluoride, 97%
CAS 
:
 328-84-7
SYNONYMS 
:
 3,4-Dichloro-alpha, alpha, alpha-trifluorotoluene; 3,4-DCBTE
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 328-84-7 |3,4-Dichlorobenzotrifluoride | 97.0 | 206-337-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. Prolonged and/or repeated contact may cause
irritation and/or dermatitis.
Ingestion:
The toxicological properties of this substance have not been fully
investigated. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray,
dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep away from heat, sparks
and flame. Avoid ingestion and inhalation. Do not pressurize, cut,
weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 328-84-7:
United States OSHA: 2.5 mg/m3 TWA (as F) (listed under Fluorides

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: aromatic odor
pH: Not available.
Vapor Pressure: 2 mm Hg @25C
Viscosity: Not available.
Boiling Point: 173 - 174 deg C @ 760.00mm Hg
Freezing/Melting Point: -13 - -12 deg C
Autoignition Temperature: > 600 deg C (> 1,112.00 deg F)
Flash Point: 65 deg C ( 149.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Negligible.
Specific Gravity/Density: 1.4780g/cm3
Molecular Formula: C7H3Cl2F3
Molecular Weight: 215.00

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents,strong alkalis.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, hydrogen fluoride
gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 328-84-7: CZ5527510
LD50/LC50:
CAS# 328-84-7: Oral, rat: LD50 = 1960 uL/kg; Skin, rabbit: LD50 = >5
gm/kg.
LC50 RAT >2,000 PPM/1HR.
Carcinogenicity:
3,4-Dichlorobenzotrifluoride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 328-84-7: 1
Canada
CAS# 328-84-7 is listed on Canada's NDSL List.
CAS# 328-84-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 328-84-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
alpha-Acetamidocinnamic acid, 98% 5469-45-4
4-(4-Nitrophenyl)-butyric acid, 99% 5600-62-4
Perinaphthenone 548-39-0
4-Bromo-2-Chloroaniline, 99% 38762-41-3
Malonic-d2 acid-d2, 99+ atom % d 813-56-9
Brefeldin A, Natural 20350-15-6
Thymol blue, sodium salt, indicator 81012-93-3
Tropinone, 99% 532-24-1
1-(4-Methylphenyl)-1-cyclopropanecarbonitrile, 95% 71172-78-6
9-Phenanthrol, Tech. 484-17-3
3,4,5,2',3',4'-Hexahydroxybenzophenone, 99% 52479-85-3
Trifluoroacetic Acid-D, 99 Atom % D 599-00-8
N'-benzyl-N,N-dimethylethylenediamine tech. 103-55-9
2,2,4,5,5-Pentamethyl-3-Imidazoline-1-Oxyl Free Radical, 98% 39753-74-7
Cyanogen iodide 506-78-5
Potassium Cyanate 590-28-3
Polymethylhydrosiloxane, ca.99.5% silicon 9004-73-3
1-(2,4-Dichlorophenyl)-1-Cyclopropyl Cyanide 71463-55-3
4-Pentylbenzoic acid, 99% 26311-45-5
Terbium(iii) nitrate pentahydrate, 99.999% 57584-27-7
Dimethyl Fumarate, 99% 624-49-7
2,6-Dibromophenol, 99+% 608-33-3
Carbostyril 124, Laser Grade 19840-99-4
3-(Hydroxymethyl)pyridine, 98% 100-55-0
Cyanoethyl Cellulose 9004-41-5
Methyl Enanthate, 99% 106-73-0
L-Alanyl-L-Alanine 1948-31-8
Methyl-12-doxyl-stearate, free radical 29639-21-2
4-(4-Fluorobenzoyl)Piperidine P-Toluenesulfonate, Contains HCl Salt, 132442-43-4
4-Hydroxy-3-methoxybenzyl alcohol, 99% 498-00-0
Alpha-Phenylcinnamic Acid, 98% 91-48-5
Methyl methoxyacetate, 99% 6290-49-9
Naringin, 97% 10236-47-2
Chlorotitanium triisopropoxide, 1.0 M solution in hexanes 110-54-3
3-Bromoquinoline, 98% 5332-24-1
Glutaric anhydride, 97% 108-55-4
3-endo-Hydroxymethylbicyclo[2.2.1]hept-5-enyl-2-endo-amine 0-01-1
5-Dimethylamino-1-Naphthalenesulfonic Acid, Monohydrate, 99% (Titr.) 4272-77-9
N-Methylpyrrole, 99+% (gc) 96-54-8
3,4-Dichlorobenzotrifluoride, 97% 328-84-7
1-(1-Naphthyl)-2-thiourea, 97% 86-88-4
2-Nitrobenzyl alcohol, 97% 612-25-9
5-Chloro-2-Pyridinol, 99% 4214-79-3
4-Pyridylacetic Acid Hydrochloride, 98% 28356-58-3
(4s,2rs)-2-phenylthiazolidine-4-carboxylic acid, 98%
1,3-Dichloro-4-fluorobenzene, 99% 1435-48-9
Heptanoic anhydride, 99% 626-27-7
Catecholborane, 1m solution in tetrahydrofuran 109-99-9
(+)-beta-Pinene oxide, tech. 75% 6931-54-0
5-Ethyl-3-Hydroxy-4-Methyl-2(5H)-Furanone, 98% 698-10-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net