Search   
MSDS 
:
 Heptanoic anhydride, 99%
CAS 
:
 626-27-7
SYNONYMS 
:
 Heptanoic acid, anhydride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 626-27-7 |Heptanoic acid, anhydride | 99 | 210-940-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid. Get medical aid immediately. Flush skin with plenty
of water for at least 15 minutes while removing contaminated clothing
and shoes. Immediately flush skin with plenty of water for at least
15 minutes while removing contaminated clothing and shoes. Wash
clothing before reuse. Remove contaminated clothing and shoes.
Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Do not ingest or inhale. Discard contaminated shoes.
Storage:
Keep containers tightly closed. Store in a cool, dry area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 626-27-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear very slight yellow
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 268 deg C @ 760.00mm Hg
Freezing/Melting Point: -12.4 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .9230g/cm3
Molecular Formula: C14H26O3
Molecular Weight: 242.36

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 626-27-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Heptanoic acid, anhydride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
WGK (Water Danger/Protection)
CAS# 626-27-7: No information available.
Canada
CAS# 626-27-7 is listed on Canada's DSL List.
CAS# 626-27-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 626-27-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
alpha-Acetamidocinnamic acid, 98% 5469-45-4
4-(4-Nitrophenyl)-butyric acid, 99% 5600-62-4
Perinaphthenone 548-39-0
4-Bromo-2-Chloroaniline, 99% 38762-41-3
Malonic-d2 acid-d2, 99+ atom % d 813-56-9
Brefeldin A, Natural 20350-15-6
Thymol blue, sodium salt, indicator 81012-93-3
Tropinone, 99% 532-24-1
1-(4-Methylphenyl)-1-cyclopropanecarbonitrile, 95% 71172-78-6
9-Phenanthrol, Tech. 484-17-3
3,4,5,2',3',4'-Hexahydroxybenzophenone, 99% 52479-85-3
Trifluoroacetic Acid-D, 99 Atom % D 599-00-8
N'-benzyl-N,N-dimethylethylenediamine tech. 103-55-9
2,2,4,5,5-Pentamethyl-3-Imidazoline-1-Oxyl Free Radical, 98% 39753-74-7
Cyanogen iodide 506-78-5
Potassium Cyanate 590-28-3
Polymethylhydrosiloxane, ca.99.5% silicon 9004-73-3
1-(2,4-Dichlorophenyl)-1-Cyclopropyl Cyanide 71463-55-3
4-Pentylbenzoic acid, 99% 26311-45-5
Terbium(iii) nitrate pentahydrate, 99.999% 57584-27-7
Dimethyl Fumarate, 99% 624-49-7
2,6-Dibromophenol, 99+% 608-33-3
Carbostyril 124, Laser Grade 19840-99-4
3-(Hydroxymethyl)pyridine, 98% 100-55-0
Cyanoethyl Cellulose 9004-41-5
Methyl Enanthate, 99% 106-73-0
L-Alanyl-L-Alanine 1948-31-8
Methyl-12-doxyl-stearate, free radical 29639-21-2
4-(4-Fluorobenzoyl)Piperidine P-Toluenesulfonate, Contains HCl Salt, 132442-43-4
4-Hydroxy-3-methoxybenzyl alcohol, 99% 498-00-0
Alpha-Phenylcinnamic Acid, 98% 91-48-5
Methyl methoxyacetate, 99% 6290-49-9
Naringin, 97% 10236-47-2
Chlorotitanium triisopropoxide, 1.0 M solution in hexanes 110-54-3
3-Bromoquinoline, 98% 5332-24-1
Glutaric anhydride, 97% 108-55-4
3-endo-Hydroxymethylbicyclo[2.2.1]hept-5-enyl-2-endo-amine 0-01-1
5-Dimethylamino-1-Naphthalenesulfonic Acid, Monohydrate, 99% (Titr.) 4272-77-9
N-Methylpyrrole, 99+% (gc) 96-54-8
3,4-Dichlorobenzotrifluoride, 97% 328-84-7
1-(1-Naphthyl)-2-thiourea, 97% 86-88-4
2-Nitrobenzyl alcohol, 97% 612-25-9
5-Chloro-2-Pyridinol, 99% 4214-79-3
4-Pyridylacetic Acid Hydrochloride, 98% 28356-58-3
(4s,2rs)-2-phenylthiazolidine-4-carboxylic acid, 98%
1,3-Dichloro-4-fluorobenzene, 99% 1435-48-9
Heptanoic anhydride, 99% 626-27-7
Catecholborane, 1m solution in tetrahydrofuran 109-99-9
(+)-beta-Pinene oxide, tech. 75% 6931-54-0
5-Ethyl-3-Hydroxy-4-Methyl-2(5H)-Furanone, 98% 698-10-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net