Search   
MSDS 
:
 Polymethylhydrosiloxane, ca.99.5% silicon
CAS 
:
 9004-73-3
SYNONYMS 
:
 Methylpolysilicone; Methylpolysiloxane; Poly[oxy(methylsilylene)];     Polyalkylhydrosiloxane
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 9004-73-3 |Polymethylhydrosiloxane | 95 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
This material is lighter than water and insoluble in water. The fire
could easily be spread by the use of water in an area where the water
cannot be contained. In case of fire, use carbon dioxide, dry
chemical powder or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Absorb spill using an absorbent, non-combustible
material such as earth, sand, or vermiculite. Do not use combustible
materials such as sawdust. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 9004-73-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: 10-27 sq. 25.00
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 121 deg C ( 249.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >300 deg C
Solubility in water: practically insoluble
Specific Gravity/Density: .9950g/cm3
Molecular Formula: C3H9SiOCH3HOSixSiC3H9
Molecular Weight: 222.4093

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong acids, strong bases, strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, silicon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 9004-73-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Polymethylhydrosiloxane -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 9004-73-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 9004-73-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 9004-73-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 4/14/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
alpha-Acetamidocinnamic acid, 98% 5469-45-4
4-(4-Nitrophenyl)-butyric acid, 99% 5600-62-4
Perinaphthenone 548-39-0
4-Bromo-2-Chloroaniline, 99% 38762-41-3
Malonic-d2 acid-d2, 99+ atom % d 813-56-9
Brefeldin A, Natural 20350-15-6
Thymol blue, sodium salt, indicator 81012-93-3
Tropinone, 99% 532-24-1
1-(4-Methylphenyl)-1-cyclopropanecarbonitrile, 95% 71172-78-6
9-Phenanthrol, Tech. 484-17-3
3,4,5,2',3',4'-Hexahydroxybenzophenone, 99% 52479-85-3
Trifluoroacetic Acid-D, 99 Atom % D 599-00-8
N'-benzyl-N,N-dimethylethylenediamine tech. 103-55-9
2,2,4,5,5-Pentamethyl-3-Imidazoline-1-Oxyl Free Radical, 98% 39753-74-7
Cyanogen iodide 506-78-5
Potassium Cyanate 590-28-3
Polymethylhydrosiloxane, ca.99.5% silicon 9004-73-3
1-(2,4-Dichlorophenyl)-1-Cyclopropyl Cyanide 71463-55-3
4-Pentylbenzoic acid, 99% 26311-45-5
Terbium(iii) nitrate pentahydrate, 99.999% 57584-27-7
Dimethyl Fumarate, 99% 624-49-7
2,6-Dibromophenol, 99+% 608-33-3
Carbostyril 124, Laser Grade 19840-99-4
3-(Hydroxymethyl)pyridine, 98% 100-55-0
Cyanoethyl Cellulose 9004-41-5
Methyl Enanthate, 99% 106-73-0
L-Alanyl-L-Alanine 1948-31-8
Methyl-12-doxyl-stearate, free radical 29639-21-2
4-(4-Fluorobenzoyl)Piperidine P-Toluenesulfonate, Contains HCl Salt, 132442-43-4
4-Hydroxy-3-methoxybenzyl alcohol, 99% 498-00-0
Alpha-Phenylcinnamic Acid, 98% 91-48-5
Methyl methoxyacetate, 99% 6290-49-9
Naringin, 97% 10236-47-2
Chlorotitanium triisopropoxide, 1.0 M solution in hexanes 110-54-3
3-Bromoquinoline, 98% 5332-24-1
Glutaric anhydride, 97% 108-55-4
3-endo-Hydroxymethylbicyclo[2.2.1]hept-5-enyl-2-endo-amine 0-01-1
5-Dimethylamino-1-Naphthalenesulfonic Acid, Monohydrate, 99% (Titr.) 4272-77-9
N-Methylpyrrole, 99+% (gc) 96-54-8
3,4-Dichlorobenzotrifluoride, 97% 328-84-7
1-(1-Naphthyl)-2-thiourea, 97% 86-88-4
2-Nitrobenzyl alcohol, 97% 612-25-9
5-Chloro-2-Pyridinol, 99% 4214-79-3
4-Pyridylacetic Acid Hydrochloride, 98% 28356-58-3
(4s,2rs)-2-phenylthiazolidine-4-carboxylic acid, 98%
1,3-Dichloro-4-fluorobenzene, 99% 1435-48-9
Heptanoic anhydride, 99% 626-27-7
Catecholborane, 1m solution in tetrahydrofuran 109-99-9
(+)-beta-Pinene oxide, tech. 75% 6931-54-0
5-Ethyl-3-Hydroxy-4-Methyl-2(5H)-Furanone, 98% 698-10-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net